I bought a used 22 cal Hw95 Field Pro. I kitted it with a Vortek kit. It struggled to make expected power. I tried different kits and springs. The best it would do is around 16 fpe. It shot fairly nicely with some of the spring/guide combinations but the rifle should be making around 17 as outfitted.

I recently added a plastic piston sleeve to reduce twang and new seal. The power dropped. I thought the piston sleeve was too tight so I removed it. I inspected the new VAC seal for damage and there was none. The seal had more drag than desired but it has less than a 300 shots on it and it should loosen with use.

Currently in 22 without a liner and with the fresh seal
FTTs 14.66 = 15.05 fpe
JSB 15.89 = 13.78 fpe

Not happy with these numbers I slugged the barrel and it had very tight chokes at the breech and muzzle. I replaced the barrel with a 20 cal barrel and the power output jumped to way more normal levels.

FTTs 11.42 = 16.27
JSB 13.73 = 15.85

Its been my experience with (with no other changes) 22 cal usually makes about a pound more energy than 20 cal in the same Weihrauch rifle. That's due to increased efficiency from the larger bore diameter. That's reversed on this rifle. It's making a solid pound more in 20. Unless something odd changed during the swap there's something wrong with the 22 barrel. The only way to be sure is to put it back on.

Or maybe put it on my 22 R1 and see what happens to it's power levels. I was hoping it wasn't the barrel because I like the looks of the sightless Karbine Field Pro.

I'm contemplating lapping the chokes looser. Has anyone tried this? I'm open to suggestions.

I'd like to say there were huge wind gusts, or a bird flew into my head as I pulled the trigger..........
Nope, sometimes you just miss............

HEY GUYS BRAND NEW ZELOS FOR SALE ITS 25 cal. GOT 2 MAGS WITH IT. I THINK 450$ WOULD BE FAIR. WE SPLIT SHIPPING. CALL JEREMY @35274zero3952.


THANKS FOR CHECKING THE AD OUT!

I don’t have a lot of feedback but checkout the review from selling my TrueBallistic Chrono when I had to!

I have both & another on the way. Which is the better unit, the stainless version or brass one.? The indexing hole is smaller on the SS version & more closer to the smaller indexing screws used on RAW of today I think. My indexing screw is wayyyyy small.

Pellets Crossman PREMIER 1250 count pellets 7 boxes 25.00 per box. Will split shipping cost.

One of a kind Sentry in .22 for sale..
Sentry in a reshaped DAR stock, painted with textured coyote tan paint for grip. Shoulders and shoots nicely!
No leaks, shoots cphp 14.3s well for 3 mags on fill.
Shot string from 2900-2100 psi
900-940-900fps.
Comes with buck rail mod in pics, which has a small crack that can be seen in pic below still seems functionally and structurally to not have any negative effects however just cosmetic imo..
Also 3 mags and a spare transfer port.
Asking $120 obo shipped inside conus.

www.rxtargetsystems.comNow available, limited edition Rx Spinner Silhouette, 1/10 scale one quarter inch thick steel target figures. Targets are the chicken, pig, turkey, and ram also encountered during NRA Air Rifle silhouette style events. This is practice on a budget!

Looking to trade or sell.
Texan .510 carbine.
The carbine is in perfect shape and holds air perfectly. Has been used to take multiple wild hogs and is very powerful. Will come with a lot of extra ammo. Open to all trades as I am wanting to try another manufacturer. Thanks for looking. 800$

Hello,

Im made a hw90.25 with a little more swept volume.
Orginal 30x85mm 60cc
Now 30x90mm 63.5cc.
Found the transferport is only 3.0mm
Im think this is little to small for the powerplant.
Im planning to dril it to 3.2mm
Its now shooting 750fps with ftt 20 grain pellets at 20 bar ram pressure.
Some info needed on transferport size and influnce on power.
its now a full 500mm barrel im plan to go 400mm and a supressor on it.

As the title reads, how do I degas the RAW Micro Hunter? I found a few threads which talk about degassing a RAW by loosening the air gauge. Is this how it's done or is there a better way?

I'm looking for a PCP for my 10-year-old. She shoots my Texan 457 but it is Way too big for her. I would like to get her something that fits her a little better! What are y'all suggestions?

I spent the whole day shooting my PCP pistols , The GKI 22 and the 25 caliber, and the PP750. All with red dots for sights , I have really come to enjoy shooting with red dots , Its not as much practice as it is adjustment to the red dot sight, You have to keep both eyes open,
To the pistols , Funds tight, skip the Huben and get a PP750 not a auto, but magazine fed pistol, Kick as-s
Huben 22 caliber, Dam- But Magazine on my is oversized
Huben 25 caliber, The true king of air pistols, All are below this pistol,.........................................JBS-AEA- JTS- So far all fit nice and tight in magazine , did I say smooth, You got it. This is it you have come to the top, There is nothing better, All hail to the new KING ,,,, Huben GKI 25 caliber ,

My model c pumps and shoots fine. The problem is the pump arm no longer stays shut. It hangs down and doesn't snap shut like it used to.
Any help is appreciated. Thanks

So I'm sighting in my new little raptor mini .25cal I picked up off forms. Having a good time and getting ready for squirrel hunt and out of no where my 7yr old walked up and said dad it'd be nice to have some deer meat. So I got clever and placed her in my shed with the window open to watch me where I've been seeing these deer walk in our yard here in town. We have so many deer in town atm. So I put up a used xop deer stand up and with in 15 mins does popped up. Waited a bit and big boy decided to walk that same path and bam I got my first deer with a compound bow!

So a couple months ago my 9 year old nephew was going to take his hunter safety course. My brother in law asked if I could bring some of my airguns for him to shoot and get the basics down more so than just on a Red Ryder he had. He has plenty of rifles but all are big guns I think .30-06, 7mm mag, nothing he felt comfortable with him shooting. So I said sure.

I brought both my Taipans and said the Short would probably be better with a shorter LOP. He shot it quite a bit and was actually getting pretty good at it. My BIL really liked it and asked for me to keep an eye out for another as he would really like one like that for my nephew.

Well I haven't seen any recently and I haven't been shooting it all that much, so I shot my BIL a txt last night if he still wanted one. He responded quickly that he absolutely wanted one. Knowing how much they both really enjoyed it, I gave him a price if he wanted mine and he immediately jumped on it.

Alittle bittersweet as I really enjoy that gun, but I still will get to mess with it occasionally. I'm looking forward to hearing all that they will shoot with it in the future.

Now what to replace it with lol

Been out of shooting for a few years, and now getting back into it, and not sure why I never thought to ask this......

I own a roofing company here in Texas. Alot of homes that we re-roof have lead pipe boots / lead pipe jacks (whatever you want to call them) that we replace. Sometimes they're painted to match the roof, but sometimes not.

Anyone know if these would be a viable source of lead if I were to ever considering swaging my own slugs?

I have a FX .22 800mm 1:18 twist barrel kit that I no longer need due to recently selling my M3. I have a aftermarket Huma high flow transfer port, and a Orion .22 mag to go with as well as the factory transfer port. Has a couple little marks on it bit i never really used it. Selling for $325 PayPal FF or you pay the fee. Buyer pays shipping. Text or call me. Doug (540)239-5197

As a husband and father I almost always have a phone on me so that I can be reached if needed. Having the phone means that I have a camera with me too. I like to take pictures and share what I’m doing with certain people. Over the years as I have shot my airguns for enjoyment I have also taken pictures along the way. Some of them are more “artful” than just a picture of the gun so I thought that I would start a thread to share some of those pictures and see what others you may have come up with.

please share your “airgun art”!

$499

Supposed to track downrange like the Labradar and the FX True Ballistics Chrono, with down range up to 100 yards. Based on what I read, the Labradar is out to 100 yards and the FX True Ballistics Chrono 300 yards...but that 300 yards is extrapolated from about 30-40 yards actual measured data.

Tomorrow my new gun arrives. Dealer mounted the scope and sighted it in at 22 yards. Where do you begin with a new gun? I was thinking of cleaning the barrel before the first shot. Then, getting used to the gun at 22 yards. Ultimately, I’ll need to resight to 40 yards. Any suggestions on how to proceed?

How many models of PCP rifles does a company need,I know, make it they will buy it.I get it ,FX must be good and have plenty of followers for their flavor of the month routine. I do not get this ,why not make a cheaper model with the combined parts of the dozens of models they already have? Come on ,Halloween is getting closer ,it could be called the FXinstein,

Really nice sidewinder compact. Works great holds air fine.. just seeing what else is out there..

Wts trijicon Acog with bac retical 1100 obo. Sells for 1450 new. Cash app or zelle

Reducing price .I have a Talon SS that came as a .25 and I bought a new .22 12 inch LW barrel from Air Force for and converted it. It was supposed to be my boat gun but doesn’t fit the dry storage compartment. I haven’t shot it much but what I have it seems the poi shifts after 20-30 shots? Anyway I have too many one hole guns to mess with it and don’t need it. It also has the super sear trigger which is very light and a moderator adapter from Donnyfl. I have box papers and all tools original sear, and pieces and parts. So it does come with both barrels .22 and .25. I believe 450 is a deal on it.
400 plus shipping unless we work anything else out. The scope we can discuss it is not included at this time.
If you have questions or need more pics text me at (865) 805-8249 Chuck

all these parts have been used