I just got a new Raw hm1000x Blue laminate .25. Just got is all set with an Arken 5-25x56 and a Impulse Air 1325 moderator. I shot 5 Magazines and all of a sudden the pellet probe is just flopping around loose. WTF? Is the fix for this tightening the little grub screws? I can’t find an allen wrench that small in my tools. I’ll have to pick one up.
My first PCP was the $299 Gauntlet when it first came out and I’ve never had an issue with it, but a $2000 gun and I’m searching the internet for a fix after 60 pellets. Frustrating.

I have a Great condition Kral NP03 .22 that loves crossman pellets and nsa 20.2g slugs. Everything included in pics. Bushnell Custom Gold scope, 3 magazines, ammo and fill probe. $325 shipped , I am open to springer, pcp or accessorry trades as well.

An idea for those of you who are interested in making a stock and are willing to sacrifice some quality for convenience. I'm just using two boards and routing out some parts so when I glue it later it forms the inlet

When a squirrel hunt turns into a dog fight.

Not going to be grabbing this rifle to shoot at all so it's going.

Comes in a precut Plano case as shown.

Rifle is as new. Not a mark on this thing. Ten to fifteen mags through it.

Shooting .25 hades extremely consistently.

Rifle comes with 0db moderator, Plano case, 3 magazines, and 2 tins of .25 caliber hades.

I also installed a bt industries pic rail with countersunk t-nuts (the right way to do it)

Attached is a photo of a 1 magazine group at 52 yards and a coinciding chronograph string.

Price for the package is $450 shipped. Just $30 over cost of the rifle alone but with $300 of extras.

After hitting the saline bottle on my first and second shots of the evening at 102 yards. I decided to try for the can on it’s end, two shots, two hits, of course I have to walk back out to reset the can… Conditions were very still, wind indicators barely moving. Sweet Atomic XR, CPHPs are dropping 4 feet and hitting! Never gets old…

Good Day AGN'ers!
I have for sale a Daystate Delta Wolf in .25 Caliber. Shot perhaps 2 tins through this rifle since received from AoA late last year (2022).
Has everything as new, including paperwork.
Additional items:
Moderator adapter (Daystate Threads to .5" Threads)
0db Moderator (Red Color)
Ergo Grip with Palm Swell. (Original included.)
3D printed extended Butt Pad (it was just too short for me). Original included.
One extra factory magazine.
One 'Midwest' High Capacity 40 Round Magazine.
One single shot tray.
Original Daystate Hard Case.
Of course it's still under warranty by AoA as well.
This rifle is very clean.
Price is $2,200. Shipping will be added once known where it's going, but in no case more than $100 shipped within the CONUS.
PayPal is preferred payment, although will accept Postal Money Order (only) as payment as well.
No trades please.
Please see pictures and ask any questions.
Thanks!
mike

Up for sale like new fx pocket chronograph!
$175 shipped conus. PP F&F or PAY FEES.

Some online articles and comments recommend cleaning airgun barrels when switching to a different pellet, at least when comparing accuracy between them. It could be as simple as firing a few of the cleaning pellets through to, supposedly, remove differing lead deposits that, again supposedly, result from firing pellets of different styles.

Do you do this? I’ve fired more than 1300 pellets, constituting three different kinds, one of which is copper-clad. Have not yet used any cleaning pellets. I’ll soon try two new-to-me pellets and wonder if the cleaning pellets really make much difference for “palate cleansing between courses.”

DIANA BANDIT 22 CALIBER PISTOL, LIKE NEW BARELY USED, COMES WITH CASE AND 2 MAGAZINES. HAS BUILT IN MODERATOR
$150.00 PLUS SHIPPING. CALL WAYNE 310-500-9933

Wednesday afternoons are the one day the local public range is open during the week. Wanted to get out for some shooting and to test some changes. But, man the smoke in the Northeast blowing down from the Canadian forrest fires is really thick and bad smelling today here in CT. I don't think I've ever experienced anything like this in my lifetime and it's crimping my style, lol. My folks have said it's really bad down in NYC today as well. Anyone else dealing with this?

Hello, I am getting the pieces and parts together to switch from pellets to slugs with my M3 600mm 22 cal. I am trying to find some data on testing before and after installing the sleeve. Please share your research or point me in the right direction where I can find it. Thanks

After one solid year of sticks and bucket practise i am thinking of building a benchrest/ FT range for people that are not "sturdy" enough to shoot FT . I just can not pretzel up and be steady @ 78 .
maybe a shooting jacket with internal steel bracing ?
OK rant over going out to practice more .

I've noticed lately that more and more shooters of airgun slugs are increasingly looking for higher speeds... My question is why?

What is the benefit of shooting faster, say 1050 compared to 900 fps?

Wind drift isn't better. Yes, the shots are "flatter", but really, with distances known, does that make a difference?

The gun gets less shots per fill, and is harder to shoot accurately, so what is the reasoning other than psychological?

25 shots at 50y in very heavy wind. 15-20 sustained and gusts well over 30. Mostly a 1:30 headwind with some shifts to 12:00. Don’t know how much I was holding off because I was trying a different scope and had to zero it in that wind. I may see today where it’s at in calmer conditions. I don’t think the low shot was a gun flier. I went to another bull immediately after in the same condition and shot 2 more in the same place. Just a change in wind drift that I couldn’t discern? The main group likely averages around .25 MOA.

38.5 gr slugs at 850

Mike

I have a vintage mcglashen air rifle that I was wondering if anybody new any information about or value of? It is set up to have some sort of remote air supply it has a full stock it is fully automatic and I will include a picture on top of that the serial numbers are 0000 would that indicate that it is a prototype?

Does anyone have any insight on which one of these compressors would serve me best? I usually only top off my rifles but topping off a 45min scuba would be a major plus. Thanks.

Got this Diana for a cheap price…thought it was pretty cool seeing as the stock was one I’ve never seen before. Thoughts? What version is this?

I have a tc35L puting out over 260fpe and a atn 4k pro 3-14.. both work as the should.. only selling because the gun have a heavy trigger and I don't care for it.. and I have 2 atn scopes.. I would sell for $1000 or look at different trades.. the scope on the gun is not included

So my FX Maverick i have thrown in under the bed, i really can not deal with that damn gun right now, so i have been using my vulcan 3

BUT ! now it is hexed too.
So the day before yesterday i ran it over the chrony, and saw speeds at 900 FPS, so as i wanted to have a higher speed as a starting point yesterday i turned the hammer spring ever so slightly and shot 5 more shots across the living room and now saw speeds just about 1000 FPS, so that was plenty i figured and put the rifle away.

Then unpacking my Vulcan 3 yesterday,,,,, well somehow without changing anything it would only shoot 580 FPS all of a sudden.

And i am totally at a loss here CUZ i have no idea what could give such a massive drop from 1 shot to the other, well aside for a blown Breech O-ring, but there are no air escaping anywhere when i shoot it.
Putting in a stronger spring i can also get the rifle to shoot a little over 800 FPS but thats also it ( always shooting 13 grain slugs )

So just got my Notos and purchased a scope for it. Well the scope mount/ring does not fit on the gun. What type of mount do i need? I am new to the whole air gun and scopes all together. All the air guns i had as a kid the scope would just mount. thx.

The magazine that came with my FX wildcat was not set up properly ( pellet doesn’t advance it smoothly due to low spring power). So, I jammed the barrel with few pellets and I was stupid enough to use one steel rod trying to clear it without even removing the moderator and barrel. Without knowing where the exact location of the jam I applied a mild pressure by hammering it but the pellets never came out . After spending a good three days to put the magazine back without success, I realized that the barrel has taken all the pressure and pushed out a piece of metal in the chamber ( picture attached). I filed the protruding metal off but looks so ugly now, lesson learned

This is a NV pic of “Greasy Gerry”. He’s a local alpha with a penchant for visiting our grill, removing the drip tray and slurping down the contents like a fine wine. He then settles in to a handful of corn from under the bird feeder for dessert, as pictured.



I’ve asked the local restaurants if they’re interested in a gnarly grease disposal worker, but there’s no takers. So, Greasy Gerry might be stuck with an interview with Mr. Leshiy Classic.

Any recommendations for a compact scope to be used on a bullpup (Benjamin Akela), preferably side focus and at least 12x. Thank you!

I'm shooting the 36gr Gen2 Javelin slugs out of my .25 Crown Mk2, i have the slug kit installed, the 1`st power adjustment is set at high and ive maxed out the hammer spring with the 1.5mm allen key, and the hammer wheel is at 23 and my regulator is at 120 but im only getting 400 or so fps. what is the deal?