I will keep this brief to avoid political commentary -- you can use a search engine and find the details on your own. But I will say the policy is totally at PayPal's discretion, and if they don't like what you have to say or what you believe, whether that be in real life, on any forum, social media etc., they can "sanction" you. AKA stealing your money.

PayPal has been doing this for ages, freezing accounts and seizing funds, but now it's pretty much official policy.

I am deleting my PayPal account and won't use it as an option for purchase/sale here any longer. I found out recently that the Zelle app works very well and can be set up in a couple minutes. Money right to your bank account, not some PayPal purgatory.

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference but will also do check or MO and ship once cleared.
• CONUS shipping is included in the asking price via UPS Ground. Please allow up to 48 hours for shipping.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

I've upgraded to other compressors and larger tanks so looking to sell some items no longer in use.

1 - Altaros Booster in excellent condition, about 1.5 years old. Used for only about 100 hours. Only repair is low side piston o-ring replaced from wear and including a good supply of fresh ones. Fresh dry desiccant.

Price $500 $450



2 - Inline air separator and dessicant drier for compressor to booster feed. These are high quality Pneumatic Plus parts. First one is an oil/water separator with auto drain. Second one is a huge desiccant air drier with a massive bowl - will come filled with fresh dry desiccant. Standard 1/4" connectors.

Price $250 $225






4 - Ninja 90ci (approx 1L) air tank. DOT approved for dive shop fills. Prod date 01/2018 so still has 1 year + before needing a hydro. Comes with Ninja EZFill valve.

Price $200 $175





******* BELOW ITEMS SOLD ********
3 - Gurlleu 3L CE approved (ie: for home fills only) 300bar air tank. Dated 01/2020. Plus Gurlleu tank carry bag. Plus JoeB TJ3 valve - note from last picture the nut to hold on knob unthreaded and was lost - still works fine but you might want to seek a new spring/screw replacement.

Price: $300 SOLD

I have an Air Venturi 4500 compressor, the big one not Nomad, that lasted 5 hours. Of course just out of warranty but I’d still fix it myself cuz cost of shipping. Both cylinders have score lines and pistons are scuffed, rings have lines in them, intake reed valve has crusty rust on it, and low pressure cylinder bore is stained like it had been underwater. I’m big on oil changes so it’s not like I abused it, always ran 3-4 minutes after filling great white. It just started pumping slower and slower until it got really pathetic, more and more oil smell and vapor in the air. Does anyone know where I can get parts? PA is no help. Easy enough to fix if I can get parts.

Picked up a brand new Beeman R7 on Ebay for a total of $302. I think I will "sort of" give it
to my wife as she couldn't cock the RWS 34 that I use to own. What pellets shoot well in
these ? From what I've read the lighter JSB's are the pellet of choice. I have some 7.33 and
7.87 gr to try out. Also have some AA's 7.87gr as well. Probably will scope it but I don't want
a large bulky scope for such a tiny rifle. I'm thinking a 1" tube 4X (maybe 6X) strait power
scope under one foot long. Any suggestions? What about rings ? I'll post some pics and
out of the box chronograph results when I get it.

Vortex Strike Pellets .25 https://a.co/d/4srW7DT


If so was there packaging sufficient? Always worry about Amazon.

Well today while testing my old herculean strength I managed to snap my liner lock. Can't help but wonder if when I siezed the shroud on I weakened it some how. So now I am down and waiting until Monday to tell FX I need 2 or 3 so I have a back up.

I have anti-sieze on my threads at least now though.

Hi!

I have been thinking a lot about getting an Fx rifle, but I having a hard time to decide which one between these two guns (New Fx wildcat mk3 bt sniper and the Fx impact m3 sniper) to buy. what's difference between these two in range and impact. Can someone advice me on which one should I pick and why? going to buy a .177 caliber.

I just purchased a Caldwell chronograph with the lighting kit. My problem is I have a really hard time getting it to record a 10 shot group, if it registers at all. I get 2-3 registered shots out of 20 shots. I have tried everything I can thank of, bright sun lite, partial cloudy, overcast, middle of the day and late in the evenings. I've used it with the sun shades and the lites on and off, and without the sunshades. I did get a couple of 10 shot groups on a partially cloudy day with the lites in the sunshades on. I do find that it works much better with my slower shooting guns, around 500-550 fps. My Hatsan is shooting(when I can get it to register) at 800-815 fps. I've tried it at different distances in front of the gun with no change in readings. Is the outdoor lighting really that critical to the Caldwell chronographs or am I doing something wrong. Thank you.

I still can't find anything officially posted about today's EBR. Am I doing anything wrong?

Would like to trade for a pcp gun equal value scope is brand new it has the black art design, throw lever the element scope cover so has a one piece scope mount with 20 moa

Uragan 2 600mm, .22 factory tune.
Was surprised that it shot the old Jumbo Monster 25.39gr better than my Avenger shoots the Jumbo Heavy 18.13gr at 100 yards.
I finally have a gun that will shoot my backlog of those! The ping is not as loud as my LCS ping and comparing the ping volume to my lower powered Avenger, it’s just slightly louder
but, with a little more treble. By no means too loud in my opinion(LCS ‘is’ too loud). Don’t have sub MOA yet but shows potential to get there. Trigger from factory feels light and crisp.
Carbon Fiber stock but is not front heavy.
Would be nice to have some tuning references for the U2. Anyone come across some?

Lightly used with Superior liner. Huma hammer spring and 1st reg delete installed. Comes with stuff shown in picture, (1) factory side shot magazine, (2) small old style mags, original 1st reg-bad, new replacement 1st reg never installed.
$1700 with 580cc bottle, $1600 with 480cc bottle - no scope or rings
Add $350 for Aztec 5.5x25 FFP with FX no limits rings

Ship CONUS, will cover up to $50 in shipping cost - PAYPAL FF preferred

I just recently got a RAW chassis rifle and I have a question for others that have them. So far I’m not seeing the accuracy I’ve read about but I’m not ready to blame it all on the gun. What I am a little concerned about is I ran a couple 12 shot strings across my Fx chronograph and the extreme spread is 25fps. It’s averaging 941 fps with 4-5 of the 12 shots in the 920 range at random intervals. I’m wondering what kinda of velocity spread other RAW owners are seeing. I’m wondering if that’s why it seems like I have random low shots every few shots.

I have two RAW 22s so I’m selling one as a I really don’t need two and they both shoot identically. Shot and posted a 200 score on the 30 yard challenge with this rifle. It’s still running the unmolested factory tune shooting 25.4 MRDs like a laser at 949 FPS. I listed it as mint condition but there are a couple faint marks on the top pic rail from the scope rings but that is all I can see wrong with it. Comes with 1 magazine. I bought this rifle new this year and it had the huge car muffler on it so I sent the barrel back to have it removed and a 1/2-20 adapter installed so you can use any LDC of your choice. I will include the extra car muffler but it’s of little use IMO.

These stocks are LH friendly because there is no cast and there are thumb grooves on both sides.

I’ve sold lots of stuff here on AGN so feel free to search my history and feedback. PayPal F&F or add 3.5%. Shipped in Continental US insured for $1575, lowered price to $1500. Not looking for any trades.

Looking for a bullpup or smaller style rifle. I have A .22 avenger with scope and bipod. Barrel band and Donnyfl extender adapter. Depending on trade have a shogun will go with it. And have a bsa tactical 6x24x40 first focal plane scope or discovery vt2 4x16x50

Selling a few airguns I don't shoot much.
1) Cricket 35 cal. with discover scope and hard case. I rebuilt this last year and tuned it to shoot 120 fpe with JSB 81 gr. It has a power plenum, weaker valve spring + a stiffer hammer spring and custom cheek rest. The shroud has an aftermarket end cap which is epoxied in (purchased it like this). Its not prefect as the price reflects but reliable and holds air. Comes with seal kit, a few parts- $675 + shipping.

2) Daystate Huntsman Regal xl .22 non regulated w/ Discover scope. Earlier this year I also went through this gun and replaced all the seals plus a few parts, tuned at 30 fpe. . Comes with scope and hard case. Nothing wrong with it and holds air, includes seals and a few parts - 2 mags. Not pristine condition with minor cosmetic faults- $500 plus shipping.

Only trade I would consider is the new Cricket 2 Tactical 60 in .30. - plus $ on my end.

Now where in the hell did i put my gun""

It has become apparent to me as I am learning from all of you, that at a certain speed (FPS) Diablo Pellets, generally speaking, experience in flight Destabilization due to their shape in general.
I wonder if people here could chip in with what they have noticed that "do not exceed" speed is to them, yes i know, barrel type, spin rate, humidity and altitude are factors BUT there is a POINT of no return for Diablos in general.

FX Wildcat MK III, in Mint condition showing zero cosmetic marks. Only saw the contents of around 4/5 of a tin of FX Pellets (see photo)

Comes with:
Rifle + Hard shell case
1 OEM Magazine
1 CARM magazine
4 Magazines I personally designed/printed
Original butt pad plus a 3D printed butt hook I designed/made
Dual magazine holder I also designed and printed
3D printed bi-pod mount with picatinny rail that I designed and printed & Bipod

SCOPE NOT INCLUDED.

Looking for $1000 FIRM PPFF + half shipping/insurance. Or pickup up in Michigan

Please message with questions or more photo's

How should the barrel on an RTI Prophet be installed?​

I took off the barrel without looking at every detail first — assuming (falsely) that there is only one position and one way to install a barrel.
Well, from what I can tell, the depth of how far the barrel is seated into the action seems to be variable, not a one-position-only affair.

So, how do I know how far to insert it?

What else should I be paying attention to — considering that this is the first time ever that I have removed a barrel from an action?


Thanks for any help.

Matthias


Specs:
.22cal Prophet 1 Compact Performance +

I live in Western Washington and There are no local airgun stores that I can find. Sure there are lots of online sources which I have used but I am a "touchy and feelly" kind of guy and I really wish that either there were brick and mortar stores I could brouse. I have checked at several PB gun stores but they want to send me to Walmart which is all right if I want break barrels but not for PCP or even pellets bigger than 22 cal. is there a listing somewhere that has airgun stores by state? I kind of wish that I lived in Ohio or Texas where airgunning appears to be very popular but as far as I can find the nearest store to me is Utah and that is a little far for me. Anyone in Washington state who has been airgunning for awhile got any better information than I do?

I am (was) very close to buying an Fx Impact M3 .22. to get to know it but possibly upgrading to .357 after some time. Now I heard two times from reliable sources that you should never ever touch the barrel/shroud heavyhanded otherwise you risk to have to sight the rifle in again.

What are your experiences? Did you push yours into a backpack with other stuff for longer hiking trips? Lean it against a tree or bump lightly against one? Grip it heartly by the barrel when picking it up?

I am not talking about being rough and abuse the gun. But I see so many people having their M3 dustfree on benchrests or "hunting" from their car on YT. Has anyone taken theirs outside in the wild? Will it hold its sighting?

Another thing I heard was that you should dryfire some times to get the air going befor hitting the target. Will the gun not shoot reliable first shot after 72 or more hours?

Any ohter recommendations for a similar but more sturdy "outdoor" gun? In .357?

I appreciate your sharing of experiences. Thanks beforehand!

Winnie

well,the barrel went from this.......

- not a good shooter w/ bad eyes. someone else could do better, I'm sure.

.

.
These chronograph results were shot today to confirm the gun was performing as it was a couple months ago when I last shot it. I shot the same pellet at different TP settings to show functionality. The gun also shot HN HP 25 gr. 0218" slugs averaging just under 1000 fps, pretty well.

AEA Challenger, 24" barrel, .22 cal.
UTG OP3 4-16X44 30mm Compact Scope, AO, IE, Glass UMOA
WestHunter Optics Adjustable Height Dovetail Scope Rings, 1 Inch or 30 mm Precision Scope Mount
Challenger regulator - the regulator is easily removed as it is just an extension to the air tube.
6 magazines, two brand new (tested, but not put in rotation)
3D printed barrel band

I will need to remove scope from the gun to pack both back in their original boxes and ship separately. Gun will be packed in the original box with manual, Pellet Shop checklist, fill probe and hopefully all six mags and the rings will fit, too. Then that will go into an overbox. Scope will ship separately in it's original box.
Close to $900 value, selling for $450 including shipping for both packages. PayPal G&S preferred or USPS MO. USA lower 48 only, no trades
Going to drop the listing after this and it can sit in the corner until I feel like playing with it again. I have other guns I want to sell, but only going to deal with one at a time.

Reason for selling is, I got into FX guns and that's where I'm going to stay.
PM with any questions.

Does anyone sell off some of their powder burners to finance air rifles? Im just not into it like I was. shooting and hunting has been a passion all my life but now that I’m older I’ve slowed down a lot. I saw the other thread about getting out of air gunning while I’m just getting started I’ll probably get rid of a few center fires that I don’t shoot any more and start buying pellet guns