Barrel is a 700mm .25 caliber CZ barrel.

Comes with all the accessories in the box, upgraded Huma Regulator, and a solid tune at 970fps for 34 gr JSB knockout slugs. Very darn quiet even with the power it’s making.

$1200 shipped

Have a few used Optics for Sale
WestHunter 6-24X50 FFP No Box $115 Shipped

Barska 1X40 Ion Reflex Sight Red Multi Reticle $85 Shipped
Sight Mark Ultra Shot R-Spec $95 Shipped
All used all function as they should
Postal MO

After checking my RAW HM1000X for leaks and an experience in o-ring replacement ... I finally had a warmer day to test, still windy.
I have no idea what my regulator is set to because I spent time polishing the washers so my initial measurement was probably wrong. Anyway I was shooting single shot and got bored with that. I do need to increase the reg pressure. No Idea what it is now. Started at 850fps from the normal 950. Increasing the hammer spring got me to 920's but no more. OK project for tomorrow, increase reg.
I switched to to my CARM magazine and just plinking at my steel 1" hole @30 yds seeing the results. Well the 3rd shot into the 2nd mag and BANG shrap all over. Crap what did I do? Pellets on the floor, plastic bits everywhere, chronograph said 621. Glad I had glasses on.
I don't know if I didn't get the cocking lever to the full closed position, it's so normal to do so.
So the mag blew up! Wow....
Probably my fault but heads up on using 3D printed parts that could be in a high stress place. Who expects the mag to blow up?

Very nice HW95 Field Pro .22 $450 shipped, I do not have the original box for it but it's in LNIB condition. Contact me for more pictures.

This rifle is a combination of mechanical rifle with an electronic trigger.

We for sure should give a follow up to this platform:
Minute 9:00 of the video:

Like the header says, Hw95N which is the Walnut stocked version that is only available through Airguns of Arizona (to my knowledge)

Time to move this this beautiful safe queen on to someone a little more into springers..
It’s been a long time since I owned a springer and decided to see how I liked a quality one vs the cheap ones I started out with a decade ago.
As it turns out, these rifles just don’t do it for me like the pcps do and as a result it’s been sitting in the safe.

I purchased this new from AOA , the rifle had a little twang or spring buzz out of the box which I didn’t like.
I’ve since installed a TBT maxi tuning kit in it and it is now super smooth cocking with a very quick thud upon firing.
Maybe a hundred pellets through since the tune kit, no dieseling at all and she shoots a solid 630ish with H&N FTT 14.66 grain pellets very accurately!

The rifle is in “as new condition”..
Not a single scrape in the beautiful Walnut stock.
No scratches in the fine blue finish either.

Will ship in original box with a secondary box on outside of that..

I’m asking $550 shipped inside the conus.
Thanks!

Look what came in the mail

Slugs i have h&n 42 gr 44 gr 46 gr and avs dish on the way 44 gr 46 gr 48 gr...any of these i should stay away before I try them...
Also what size Allen is the one for the power regulator the one that comes with it too short to do full rotations

Go to load your next round to realize your worst nightmare - an empty magazine?!!!

Yea happened to me the other day thought I’d share some footage of that fiasco.

Scope is a Dnt Tnc335r seated on an Uragan 2 700mm in .25, slug of choice are the devastating 37g Zans.

I have scientifically determined that a 21 grain slug does a better job exploding a can of beer than a 10.6 grain pellet. Both were going about 900 fps at the muzzle. Photo evidence is attached. Exit first, then entrance side.

I hope someone can help me out with this one. I have watched numerous videos over the years of airgunners shooting long range (100 yards and beyond). Something stands out to me. The angle and impact, especially when shooting paper targets, appear to always be perpendicular to the target. I have watched, in particular, a lot of AirTac Hunting videos where they show the looping trajectory of the pellet or slug. In my mind, there is no way the strike on the target could be at a 90 degree angle. I am NOT calling anyone out in any way. Just trying to figure out projectiles and aerodynamics.

Keith.

Daystate Delta Wolf .30 caliber in mint condition. Only been shot a few a sessions and one 100 yard BR match at Fairfield Sportsman Association. No leaks, shooting very accurately and repeatable. Comes with the following.

Discovery Opt 5-40X56SFIR FFP 1/20 MRAD Zero Stop / Model: ED-ELR
Eagle Vision Infinity IPS-30 2-Pc 34mm Adjustable Mount
.25 / .30 Fatboy by DonnyFL $30 - Extension/Extender Tube
ALPHA/DELTA WOLF PRS GEN4 ADJUSTABLE BUTTPLATE WITH MONO POD AND BAG RIDER (ADAPTER INCLUDED)
Case & all paperwork
Price: $2,200 ( Price Reduced )
Payment Methods: Zelle, Apple Pay & Venmo
Shipping Cost is extra.

email: [email protected]

Works great 10 rounds DS .22 Carm Carbon magazine $40 shipped. PM if interested

Picked up this nice Sheridan Blue Streak at a recent firearms auction here in Ohio. Paid $150, and it came with the original box (showing quite a bit of storage wear) as well as the instruction book. Serial number indicates a 1976 build, just before Benjamin stepped in and bought them out.

I purchased the gun thinking I would probably need to drive it over to Baker Airguns for a seal job, but when my order of .20 cal JSBs arrived today from Trenier, I took it out for a quick test. Despite being nearly 50 years old, it looks and shoots like new! Took about a dozen shots with anywhere from 5 to 8 pumps and was knocking the bottom out of some Coke cans from about 20 yards shooting freehand with iron sights. I'll put it over my chrony when the weather warms up, but I can tell it has some pretty good zip. Despite having some nice modern PCPs at my disposal, it's still a joy to get out the vintage guns for some plinking fun!

New to the group, I have had a Umarex G2 SL .25 for a few months now and it has been great. Already install the Hajimoto 2 stage trigger, carbon bottle with 2200PSI regulator, also have a DonnyFL SUMO moderator. It shoots pretty good and I have no complaints other than of course the size and weight and because of that I am looking for a second AG. This time I have my eyes on the Uragan 2 or 3 Compact with carbon stock in .22 cal.

Just figured I would introduce myself....

Only problem is only my PP 700 and PP 750 and my reximex are the only guns I got that shoot them well, and there all pistols because I do not expect asprin size accuracy at 100 yards with my pistols, Just kill the can at 25 yards and hit the pill bottles ,,,,

I bought my first springer in the early '70s, a Wischo 55. As a teenager I was fascinated with its accuracy and power, exceeding the familiar store brands I owned. I continued to prefer break barrelled springers, acquiring a few more as a young adult and married man. In the late '80s, we moved to our current rural address. I abandoned my air arms since I had acreage and the ability to discharge firearms on my home ranges. I believed that .22 rimfires were superior to springers in every respect. I put my springers away, seemingly forever. As I enter my 4th quarter of life, however, I'm delighted to reintroduce myself to pellet guns. I have grandchildren now, and they enjoy firing my Daisy, Crosman, Beeman , Weihrauch and other air arms. Should I eventually return to suburban residency, I'm sure I'll find my collection to be more appropriate and valuable, as before. Finding this website will make the years ahead even more enjoyable.

Leshiy 2

Hi everyone, I currently own a Taipan vet 2 and love this platform. If there is no user error I can hit anything. The other day i aimed for the head on a dove at around 120m and thts right where it hit. Everything about the rifle is great other than the weight atleast when I walk around and try to shoot without anything to lean it on. I originally bought this rifle for dove hunting after alot of research , but I’ve had a change of heart. I don’t want to abandon the rifle in my second home and use it for 3 weeks out of every year. With this out the way I am looking for recommendations for a cheaper PCP rifle. Main use will be for hunting doves anywhere from 30-120m far. I want it to be accurate with a decent shot count and in .22 cal. Mainly will be shooting jsb 18.3g . Also the lighter the better. The scope mounted on it will be a Element Helix 6-24 apr1c reticle. I don’t mind buying used and the cheaper the better since it will mostly be stored away. So any recommendations?

Hi lads. Recently I purchased a aliexpress pcp compresor for 90 bucks on a super commy Tianmen offer, why I purchased it? because I saw the exact same device in Amazon, branded as Tuxing, but at much more price.


(This is the Amazon one, the aliexpress one is exactly the same but without letters and engraving)





Well, I start filling my GK1 with it, I already know and asumed that the thing can only go up to 4500PSI/300bar, and GK1 fills up to 5000PSI/350bar, but I don't really care that much, I just wanted to shoot the gun without having to manually pump it.

I wrongly assumed that the thing, as the manual say it, will stop at his max pressure that is far below the pistol max, and i go doing other things... when suddenly, the TV showed something about ***†** -Are you really trusting a chinese crap?- Oh boy... what I am doing! I inmediatelly ran to the compresor to see with horror the indicator at 5200PSI. I turned of the compresor, bleed the valve and shoot the excees of pressure out of my GK1.


Now I'm confused. I'm partially happy because the stupid thing can actually fill to the max GK1 pressure, but at the same time I'm concerned about it. Should I use the compresor that far beyond his max rated pressure? does anyone have experiences with this exact compresor branded as Tuxing?

I may work on some sort of safe encapsulation enviorment for if the thing decides to go Allahu Akbar on me, because it's obvious that I must be there when this is filling things.

**** Leave the political stuff outside AGN ****

Am I correct in thinking that the a slug going the same speed as a similar weight pellet, has a flatter trajectory?

School me some on slugs please. I’ve always thought that if I could shoot slugs even at slower speeds from my pcp, I could have less holdover than shooting similar weight pellets.

Hello everyone and hope all is well.

I just received my GX-CS4-I compressor and I have a questions regards on how to refill the grease pot. After I unpacked the unit I unscrewed the pot and noticed it was mix of yellowish grease and white grease combined together. I unscrewed CCW the small plunder knob all the way in, took the existing grease I wasn't happy with and added some of my SuperLube Silicon Lubrication grease. My question is, once the grease if filled all the way to the edge (flush), once I screw the pot grease back in, do I need to turn the small plunger knob once or twice prior firing the compressor for the first time? Or should I screw the grease pot and leave it as is and only turn it twice per manual after the first 4-6 hours of usage? Any advice or tips would be helpful. I appreciate in advance!

gone - delete

Hi
I got a small dent in my fx crown stock not really a big issue but still annoying.
Any one got a tip for that? maby what material they used or color code?

Currently has df fx, is not quiet. What DF moderator in22 will work?

I have a like new Taipan Veteran 1 Long .22 looking to possibly trade or sell . Gun shoots awesome right now it is set up shooting Hades 15.89 at 917. I Don't get out and shoot a ton so not a lot of shots through it. Gun is definitely backyard friendly. Looking for something of equal value in mint condition. Maybe on the line of a FX Wildcat MK3 , Krait x but I am open. Selling price 1000.
Will come set up and with the 2 mags and fill probe , owners manual.
Thanks for looking