I will be using my CS4 to fill a 40mim bottle. I was wondering do you run 15 minutes with a 10 min cool down? Or what is the recommended way to run these for large fills?

I don’t know any other Springer shooters and in particular any HW30 shooters other than on forums. I would like comments from any HW30/R7 owners that shoot 50 yard bench. I think my HW30 is more accurate than I am, I’ve had this, my only air rifle, less than a year. Still learning proper hold. Please tell me if these are decent groups at 50 yards out of a HW30. AIRMAX 4-12x50. All with AA Diabolo Field 8.4. Zeroed at 25 yds. 3 mildot holdover. Always 5 shot groups, 1” CTC average. Thanks for any comments. I’d like to thank MyCapt65 for a chat about my gun. It was very much appreciated.

I've seen a few posts on here in the last little while griping about shipping, and I have some advice.

1) USPS Ground Advantage, it's ok, but in my mind not really worth the, sometimes, long delay in delivery. I've used it a time or two, but have sworn off it.
2) USPS Priority Mail, it's their best option, but mail service is getting worse every day. My last incoming shipment took 9 or 10 days and was 60 miles form my home for over 3 days. Then the funny story is... when you come to my house, my driveway is roughly 300 feet long, and then it splits, you go right into my garage, on that side you could conservatively park a dozen cars. If you go left, you could literally park a 747 in front of my house. But, and this is the great part. If a delivery is on saturday, (not my normal mailman), I will almost always get a notice, "driveway inaccessable" HOLY COW! how much room do they need!!!!!?

So, I'm not using USPS any more than is necessary.

I've had good luck with both UPS and FedEx, so when one of the service techs at AOA had me send in my Impact for work, he said use pirateship.com and save a bundle. He was right. You can ship a gun, which normally would cost something on the order of $60-100 for around $35, it's amazing and they use UPS or USPS, and there may be another too, I can't remember. So that's what I use and it's amazing how much you save and I've never had a problem and when you go into your "free" account, you get a history of all shipments and tracking numbers. So if you haven't give it a try.

Our newest version of our patented drop down adapter is now available.​

This version 3 is designed to work with all Air Force new spin lock standard size aluminum and CF bottles. Spin lock bottles have the gauge and quick fill mounted to them.​

Will not work with small bottles (TalonP, Escape, EscapeSS)​

Shoulder your AF rifle the way it should be, below the bore line.​

No more high scope rings and cramped necks.​

Air Force Drop Down Adapter Version 3 - TalonAirguns

Our newest version of our patented drop down adapter is now available. This version 3 is designed to work with all Air Force new spin lock standard size

talonairguns.com

Since I've got plenty of spare time on my hands, I decided that my Veteran needed a murse to hold the extra magazines. I had already bought the aluminum 2 piece bolt on set, but it didn't hold them very well, and I felt like the orings were getting damaged putting them in the holder - they still were quite loose. I came up with this, I'll probably make a second and third one just to see if I can simplify it some, but for my first one, it turned out good. It works fantastic and looks the part.

I need a valve seat made for my rifle out of Delrin. I have seen a lot of talented people on this forum and figure I would ask here to see if anyone if interested. Below is what I need.

Part number 73 is the valve seal.

The outside diameter is 13.00 mm

The inside diameter is 6.60 mm (this is the hole in the seal)

The outer edge thickness is 1.45 mm

The inner rim thickness is 1.75 mm (this is the part where the valve sits on)

The inner rim is 9.50mm diameter (this is the part where the valve sits on)

I just got my fx dynamic compact .22 in, after zeroing with jsb 18.13 grains, I pulled the chronograph out to see where it sits. The average was around 815 fps. Being fairly new to PCP, I did not know if I should try and push these pellets more or leave it alone. Rifle is being used for pest from sparrows to pigeons. Just wanting some other opinions on whether or not I should try and gain more energy per shot

Custom Panthera Hunter Compact, Multi Caliber, w/ .22, .25. and .30 380mm Barrels. Multiple Stocks and Air Feed options. Pictured with 480cc CF Bottle AND 170cc rear cylinder as Buttstock base tube (650cc total). Additional stocks include OEM FX Panthera bottle stock and Custom no bottle Folding stock. Saber Tactical ARCA Trigger Guard. Color matched accessories including Custom Buttstock, Cheek Riser, Gauge, Power Wheel, and Cocking Lever soft Rubber Covers. Multi Caliber Pin probe for .22, .25, & .30cal. Impulse Air 1350 moderator with Color matching trim rings. Upgraded w/ 13.7g Brass Hammerweight. Shoots "Lights Out" in any caliber. ************

Hi Guys,

I am pretty new to the whole airgun scene, but I did watch a lot of Youtube videos mainly from Matt Dubber, AEAC and some others to prepare for my new toy, a FX Maverick compact in 22 cal topped with a very cheap 4-12x50 scope, and an FX chrono to help me dial it in.

Anyway, I have zeroed the setup at approximately 25 meters at regs 115/85 and powerwheel 4 at 870 fps ->ES of 1 and std dev of 0.5 over 6 shots (for what it is worth) JSB hades .22 15,89gr.
It really shoots like a laser here, ctc group about 3/16 or 5mm. I was very happy with how it performed. So I pushed my target a bit further, 40m this time, expecting the impact to drop a bit vertically, which it did by about 1" or 2,5cm. The only strange thing, it also shifted right by about 2" or 5 cm (I can still print decent groups there., so it is not spread).

So I went online and looked up everything that could cause this to happen, so I started with making sure the optic is level and that the crosshairs are plumb. I spent a whole day using different methods to verify that it was not the optic placement/ adjustment, I used bubble levels, self leveling lasers, plumb bob on a string, light front to back through optic to align crosshair on the wall with a plumb line, I have done just about everything to make sure that the optic and reticle are level and plumb, but still I get the same results.

It is kind of frustrating that I am not able to get it riding the line.
Might it be the cheap optic that might be out of whack?
I am still saving up to get a decent scope, but this is what I have for now.

I am open for suggestions, if possible, an explanation how to check or how to diagnose would be very helpful!

Thanks!

FREE Two fill probes. One I bought new for a Taipan veteran (sold) and the other came with a Leshiy Classic (sold) and would not seal. I replaced the o-rings I had in hope to fix but then the probe would not fit the Leshiy - likely the wrong o-rings as I used Taipan sized. I simply don't need these anymore and free to whomever wants them. First PM with valid address gets them. I will be shipping them in a padded envelope. CONUS only. GONE

Which is the best tuning kit for the HW95: Vortek, ARH, or Tinbum? Each seems to have it's following. The components of the Tinbum kits appeals to me because of the lubricity of the Delrin material. Please, if you have only used one of these kits and have not used others, then you have no comparison. I know many will say I use "X" or "Y" and it works or it's crap, but I'm looking for a comparison.

Comes with .22, .25 and .30 barrel kits and an extra shroud and a mag in each caliber. Barrels are 35 inch. Shoots and functions great. Does have some knicks and scratches from previous owners. I havent had it long, I thought i would give one a try and although it shoots amazing, its too heavy and im not much of a bench shooter. Other than cosmetics, there is no issues with this rifle. Scope and bottle mount not included. $1800 shipped or trade.

Preferably, in the eastern U.S?

HW100

Does anyone have the Huben GK1 .177 cal ?
If so can you share the fps/fpe

I have had a few EDguns, but never seen this particular fill probe. I'm not sure which foster adapter will properly thread and seal with this EDgun fill probe. Which Foster adapter for the following EDgun Leshiy fill probe? Don't mind a PM either. Thanks Norm

Okay, so I'm back with my 3 groove .22 barrel. Hammer Forging is definitely my favorite. Nearly always concentric to bore. Very smooth with little lapping if any. Mostly just a polish after maching to fit. Here is a factory port vs mine. I got a lot of advice from people I truly feel know their stuff to make this possible. I believe in redundancy. My barrel requires 3 orings to fail on either end of the barrel to cause a leak. I've noticed working on these for Pyramyd Air if you swap liners often or just once that the M18 OD M14 ID o'ring in the muzzle end of the cap or the M16 OD M14 ID in the breech can get cut by the edges of the brass on the breech side or the steel housing on the muzzle side. My barrel incorporates two additional orings on each end and all edges are sanded smooth. I have to finish cutting the leade for the breech and a little polishing on the ports plus obviously shooting the rifle but so far all of my barrels have shot sub MOA. I'll link vids later as I get it ready. I don't like editing plus it leaves room for hiding things you don't want people to see so mine will show full details good or bad. Obviously the full diameter barrel is a little heavier. Factory is right at 14oz and mine is 25.5oz. Obviously none of this matters and no one will care until you see results. That will be updated in a day or so. Again, on film no cherry picking groups. The 3 groove design reduces friction and adds speed with no other changes. I'll get that on video as well. So far the barrel hasn't been picky on pellets at all. Keep them 850-950 fps and they shoot great. Slugs need to be .217-.2175 for best results. Again, all that will be in the videos.

What ammo are you guya using? What tune and platform and if possible lets see the rig.

When are .30 cal air rifles the most effective option? Bore hunting? I have an FX MKII Impact .30 cal.

I can't get over how hard this thing hits at low power, I tried a few rounds at high power and she's got a bark. HaHaHa

I'm wondering what others have their reg. pressure set at?
Mine come out of the box set at 160 bar, that seems very high to me?

I'm still in the process of tweaking and getting a feel for the rifle. Here are a few pictures from a few days ago straight out of the box and slapped a scope on it.
BRK Goodness!
35M 30 shots with JTS 18.1 grain pellets .22 cal.

Like new Daystate Redwolf HP .22

Walnut stock with lower pic rail installed, upgraded 580cc bottle with one magazine (new style) and single shot tray. Includes the upgraded cocking handle (original included as well).

One battery, charger, manual, original box

Shoots the 25.39 on medium at 990 and is phenomenally accurate.

Bipod not included, have multiple moderator options that can be discussed if desired. I would recommend the 0dB.

Shoot over what ya got and we can see what we can do (cash can be added on my end if need be).

Struggling to find out how to post an ad. Seems like I’ve meet all the criteria. Could someone point me in the right direction, please?

A long time AGN member asked me to tune his .20 HW80 for him, shipped it a week ago, and it has disappeared into "never never land." It should have been here last Tuesday but still hasn't shown up and USPS hasn't updated its status to the tracking site for a couple of days now. I hope for his sake it shows up.

At any rate, I had everything set aside and ready to perform the .20 caliber tune for him, and had blocked out time this weekend to do so. With nothing else really to do that was in any way productive, and too cold outside for much else, I decided to test all of the available .20 pellets I had in my always remarkable Weihrauch HW97KT. A few years ago, I installed a Vortek PG-4 Steel HO kit, including the Vortek vacuum piston seal, with the spring cut down to produce between 14.5 and 15.5 fpe.

I have written about this rifle before. It is incredibly consistent as you will ascertain from the accompanying SD data. The original tune resulted in the JSB 13.73 pellet being selected as the preferred ammo, but after many thousands of shots, I thought it would be interesting to see if this were still true. In the end, the 13.73 and the 15.89 pellets basically produced the same group results, though the 13.73 velocity is higher (as anticipated), allowing the rifle to shoot a little flatter. This rifle has been remarkable shooting consistent 1/2" to 3/4" 10 shot groups at 50 yards.

The results of my testing, at 18 yards indoors, can be found below. Thanks for looking...DZ

***SOLD***

MINT Brocock Atomic .22 w/Precision Micro Hammer Adjuster and Upgraded Folding Stock and Bug Buster 3-9 scope and rings

Never leaked and never had ANY problems.

30 Day Satisfaction Guarantee*

Zelle accepted. If you want to use PayPal, add 3%

Located in CT USA.

I am original owner.

More than 2 years warranty left.

$1,299
No Sales Tax unless shipped to CT

Target image below at 30m from bench frest
LIKE NEW

*Terms apply

SOLD RAW Micro Hunter .22 Camo MINT Condition $1159

Located in CT USA

$1159 by Zelle or add 3% for PayPal

Forward vertical grip/bipod, laser and moderator are included. DNT TNC225R Day-Night and Thermal Scope with ballistics not are included but PM me for the scope.
Gun Rack not included

1 Magazine included (more if I find them)

Lower ARCA rail is included