In celebration of 4 years were giving away a Fx impact M4 package. This giveaway is held on instagram only as thats the way we can track/automate the giveaway picker.


WIN THIS AWESOME PACKAGE!
-FX Impact M4 Sniper .30 cal
-Saber Tactical Buttstock
-Saber Tactical Arca Rail
-Element Titan 5-25x56
-DonnyFL Yokozuna
-Airmarksman Backbone rail (Added recently)


HOW TO ENTER
1. Like the post on instagram
2. Tag 3 friends
3. Follow on instgram @thepelletshop | @DonnyFL | @saber_tactical | @element_optics

-Deadline to enter: August 31 2024
-USA resident’s only, certain state restrictions apply
-Must be 18 years or older
-Winner will be contacted by us directly by Instagram DM
*beware of scams, we will never ask you for any payment*

WWW.THEPELLETSHOP.COM

.22 cal @15 yards leaving the muzzle at 930 fps. Shot into modeling clay at 78°

Daystate Huntsman Regal .22 Regulated
Very light use a few times at an indoor range. Like new condition super accurate.

$700 Shipped

I brought the FX Boss .30 cal with me today at the range. I have not shot this rifle in months, as I normally shoot .22 /.177's for the 30 & 40Y target challenge cards with 23-32 FPE rifles.

Newman Buck set this up for me about 18 months ago, and it still shoots very accurately at both 50 and 100y. At 78 FPE it does jump a bit, but I need to adjust my shoulder hold.

Weather: 80 degrees and humid
Rifle: FX Boss, walnut stock, 700 cc bottle
Ammo: Slightly lubed JSB 44.4g Pellets
Scope: Sightron 2FP 10 X 50 X 60mm mil dot reticle
Front Tripod, Rear Protektor bag
Flags: 1 near flag at 10Y
Targets shot: N50 (2), EBR (2), NUAH (2)
Wind Reading: C+ grade

I shot two N50 cards to start the day. A 241 and 242

Moved out to 100 yards and shot two (NUAH - nothing under a hundred) GTA cards

Finished up with two EBR cards; a 211-4X and 228-5X . Note: One of the bulls on the 211 card, I accidentally forgot the 5th shot. Too bad, but it cost me as I had a 31 on that bull.

Mike (CC) - I love this gun.

NOTE: The range was COLD when I snapped that picture, with the other shooter down range.

Lots of pics:

I would love to see a forum listing for Air Gun Shows . This would be a place for all USA Air Gun only shows to list the name date times and place of any air guns shows for the next year or remainder of this year . I just spent an hour looking up Air Gun shows but all i could find were old postings back to 2016 .
Seems to me most shows are in the early months of the year If there was a place for these shows to advertise it would be beneficial for attendance .
Maybe if AGN had a place to post the shows and word got around to other nets that there was such a place the list would grow and and the shows would grow also .
Just an idea , Stan in KY .

In todays day and and age why on god's green earth do the gun manufacturers continue to make guns Right Hand only, or at least damn near impossible for a lefty?

Are we any less of a shooter?

Did lefty shooters offend these manufactures in the past?

I have asked some of them for the reasoning and got fed a line of BS about design and production cost... Come on now.... I do happen to know a little bit about design and production of machined parts. I own and run a successful business in the field...

Trust me when I tell you it costs No more to design a product on center or off center

It is just frustrating as a lefty and pretty damn stupid of the manufacturers to blatantly choose to lose the money on something that costs no more to make.....

Ok I feel better getting that of my chest, hopefully some of you fellow lefty's will chime in.

Stay cool mi amifgos

. 10am short hunt. 3 shots. One at 40& 2 at 25. And yes I have much nicer looking rifles to choose from but the 90 is what I consider my grab and go gun lol. That rifle has character kinda like me . But it will put meat on the table anytime I take her out.

Picked up a blemished HW97K from Pyramid Air just over a month ago, stock had one small mark underneath and that was it, it looked brand new. I mounted a Hawke scope with 2pc Sportmatch mounts and sighted in at 35 yards. Tried several different pellets, one day gun would like JSB's and then the H&N FTT ammo then Crosman Premier 7.9's.
Was kind of all over the place first 500 rounds but still decent accuracy as gun was breaking in I got the occasional dieseling. Stock screws kept coming loose and were loose when I received gun from PA, the pin that holds the cocking lever latch in place kept backing out, and a little green lock tight took care of that.
I ended up removing stock and hardening wood around stock screws with some thin Mercury Adhesives CA and this solved the loose screw issue.
After about 1000 rounds I made a slight adjustment to trigger and it's right at a crisp one pound. I ran over chronograph and gun really settled in nicely and to my surprise likes Crosman Premier 7.9 gr the best, velocity is very consistant hovering right around 900 FPS, I also noticed long range accuracy at 75 yards is outstanding with the Premiers, these little pellets shoot a full mil dot flatter at this distance compared to the same weight JSB and the heavier H&N's. In past years the first thing I would do is tune any springer I purchased with a kit but the more I shoot this gun the smoother it gets with less and less spring twang. I really see no need to take this springer apart, just needed a few tins of ammo shot through it to break in. Just curious what gun will be like with say 5K rounds through it. I have several springers and quality PCP's but am really enjoying the 97 right now.
I placed a target out at 45 yards and resting off porch post standing up I placed ten shots that I could cover with a quarter with the Premiers, I was blown away when I approached the target and saw the group. These cheap Crosman Pellets from Walmart are awesome.

Looking for fx Air gun in .25 for around 600$
dreamline classic
or
drs classic

Since the impact m4 came out. All I see youtubers post is their new m4. Talking about utubers like Matt, Gerhard, shooter 1721, Utah airgun, airgun channel, airtac hunting, earnest, viking airgun, upnorth airgun, etc. You get what I mean. Fx fan Boyz. This happen when the mk2 came out. It was all about the mk2. Then m3 came out and all their channel was on the m3. Now m4 came out and their channels is all about the m4. Do they freaking get free guns from fx or what. So they just toss away older impacts? Or they ship them back to fx to recycle? Drive me crazy each time a new impact comes out and they talk so great about the latest and greatest m4 and make my older impact seem like inferior. Do I need to freaking upgrade to new impact each time one comes out?

I have for sale a maverick compact in .25. Good shooter. Currently shoots 25.39 just over 900 (905-912). I also shoot jts 29 gr domed out of it and they do very well. I believe it shoots them just over 860. Gun holds air and operates great. Will sell as pictured with bipod, west hunter mounts , stock FX aluminum can moderator and bushnell engage 4-16 second focal plane scope for 1025 shipped. Will sell without scope and rings for 925 shipped. It will ship in the fx hardcase. I usually can only ship the first part of the week. Thank you for looking. NOT LOOKING FOR TRADES

New never mounted tactical stock. The masking tape is just to hold the screws in the place where there are supposed to go.What you see is what you get. Asking $190 shipped. I prefer paypal f&f but I will entertain other forms of payment as well.

Anyone ever mess with this particular rifle? This is the standard Rifle, not the bullpup. I bought a used one in 22. It's a pretty standard take on a traditional air rifle. It has a terry decent trigger once I figured it all out, and got it tuned. The magazine is similar to the Weihrauch HW100, simple and effective. The mag latch is a bit different, it has two positions, auto or manual rotation. Wierd, but works well. It has a CZ barrel and as is typical, accuracy is amazing. Every group right from sighting in a new scope to testing a couple different pellets at 30M has been one hole, even Walmart Crosman hollow points. It seems to love everything. I have a Katran in 177 and those CZ barrels are pretty amazing. Haven't put it over the chrony yet, but it's hitting fairly hard.
Anyone else had experience with the carbine version? They seem pretty rare. I guess the newer, more easily adjustable, tactical style guns are more popular.

When it rains ,it pours. Haven’t seen many tree rats lately but today they came in forces. Battle stations. Out comes the HW98 .177.
5 shots and 5 invaders eliminated. Two did a dance. Had these pests inside my house before, that’s why I got into Springers. Crow

I recently purchased a tripod & head, as well as a second set for a friend who later decided against it. So, I’m putting the second set up for sale. These are brand new, only out of the box for pictures. I use PirateShip, so shipping prices should be reasonable. Not interested in trades, and payment via USPS money order or PayPal F&F.

Purchase both for $380, shipping included to the same address.

A) Leofoto LN-364C heavy duty, carbon-fiber tripod. Details are here: https://leofotousa.com/products/leo...atible-carbon-fiber-tripod-with-75mm-bowl-bag

This is a rigid, full-size tripod, with thick (36mm / 1.4 inch diameter) top leg portions, and 10 layers of carbon fiber. I chose it primarily for standing & sitting shooting in my yard and permissions, where its weight (about 6 pounds) isn’t an issue, but rather a benefit. A great feature of this style of tripod is the quick swappable platform. You can rapidly switch from one type of head to another (potentially with guns/spotting scopes/etc. already attached) without unscrewing anything - unlock the platform with a 1/2 turn of its clamp, then push the red release button - that's all it takes to remove it. Additional platforms are about $30 each.

It includes a nice padded bag with room for an attached head, a swappable platform (with standard 3/8 inch stud, for common bases), a 75mm bowl (used for leveling bases and video heads), spike and rubber feet, and a few Allen wrenches, all in the original box.

$235, plus shipping (double boxed).

B) Leofoto MH-50 Full Dynamic Ball Head: https://leofotousa.com/products/leofoto-mh-50-panning-ball-head-w-handlebar-control-arca

This is a well-engineered head, with a 50mm ball and “motorcycle throttle-style main knob for rapid adjustment.” It is very smooth, and has a separate friction adjustment to allow for finer control. It sits on a lockable panning base, and so allows a variety of movement controls. It has a 3/8 inch threaded hole on the bottom for attaching directly to a tripod, or platform (as on the tripod above). It incorporates an Arca-Swiss compatible clamp, and includes a 70mm (~2-3/4") plate with 1/4" stud (FYI I have attached my similar plate directly to my Taipan Veteran stock, after removing the 1/4" stud).

This and other sizes of this head (e.g. MH-60) are well-reviewed on this forum.

This head was included in the box with the tripod when I bought it, and so does not include a separate retail box.

$145, plus shipping.

I'm pretty happy with the final result because I designed and printed many parts by myself.

parts list:
Notos with UTG bug buster
88machine's plenum kit
midwest industries beam stock adapter and carbine stock
Emissary Mlok Handbrake

I made these:
unf moderator
Picatinny stock adapter insert
mlok handguard
thread protector

I just obtained this European Gaggenau Fluerscheim Air Pistol .177 cal air pistol. I hope it works since the cocking handle is lost it probably works great. I will see soon. Airgun is marked with .177 cal "BREVETSADA" and "PATENT" on the frame. Pics are attached.

Any information, insights or general help would be great, thanks,

I've seen WAY too many "experts" (YouTube, and photos on this site) attempt to polish/smooth trigger parts...BADLY !
So here's a little help.

The way that many seem to be doing the work are actually changing the angles of the given sliding parts and doing more harm than good. Using "round" stones to polish "flat" parts (!!!), WHAT THE F... .

Anyway, here's a way to keep the, as designed surface angles CORRECT while completing the polishing process, WITH...minimum material removal.


Works on many different metals, and parts.
Having the ring and pinion gears done on my Hot Rod.

Mike

I have a pair of Jet pistols for sale.

Jet 1 in .22
Jet 2 in .25

These include the Hatsan LDC adapters. The .25 was converted from a Jet 1 to a Jet 2, so there is also a spare air cylinder and valve block included. Comes with stock magazines plus larger capacity Hatsan Sortie Magazines. This will be sold and shipped as a pair in the Plano Double Pistol case. The case will be shipped within an outer box. $300.00 shipped! I use Pirate Ship to get the best shipping rates. PM me you mailing address for an exact shipping quote. Not interested in trades. Will accept PayPal F&F or add 4% fee for Buyer protection. PM with any questions.

I dont KNOW that it is. But with two of my three scopes i cannot raise poi enuff. Still inches low. Anybody know what gives? I mean ya shouldnt have to go thru this scope ring some do some dont song and dance With an out of the box brand new gun?I love the Wildcat, super SWEET tigger but all this scopin ringin drivin me nuts! Ive tried high low and mid rings… shimming too, ive tried high rear, low front rings… got sdjustables otw but seriously? seems a pretty major design issue.

Beautiful Skout Epoch .30 cal

25" barrel with all 3 liner sizes.

As new, untouched spares kit. Heavy duty Plano hard case.

1550 Shipped. Most typical payments accepted CONUS only.

Have a jsar raptor in .25 with scope snd bipod loved the rifle but need money to fund other items will have pictures posted soon
$1100 shipped
Also comes with several tins of fx pellets

Looking to sell my 9mm Leshiy 2 with 450mm barrel. It has a few dozen pellets through it. I just realize I don’t need anything this big. I have a Leshiy 2 in .30 and it is plenty for what I need.

Comes with gun in original box as pictured as well as 2 full tins and 2 half tins of pellets.

Looking for $2500 plus shipping. NOW $2350. NOW $2150.

Up for sale I have two almost new scopes . First is a basically new hawke frontier 34mm ffp scope and the second is hawke new gen sidewinder but this one I have to keep rings. The frontier 34mm is $650 just scope shipped and sidewinder is $350 shipped you pay pp fee.

So recently bought a pretty nice condition diana 66 to go in my giss rifle collection, but.....when the rifle showed up, the barrel is stamped 4.5/.177 as one would expect, but a .177 pellet just fell right through the barrel when I went to load it. What does fit in there perfectly is a .22 pellet, and there is no rifling inside the bore......you read that right, it's now a .22 smoothbore! Please help me understand what reasoning someone would have had to do this? Dart gun for a club maybe? That's the only thing I can think of that makes sense. Or is there a possibility this was done by the factory for some reason? I'm pretty upset, as this was not disclosed when I bought the rifle. Am thinking of returning it, which sucks because I love the rifle otherwise....but if I kept it the odds of me finding a good barrel are about as good as getting struck by lightning I'm thinking any info or opinions on this strange rifle would be greatly appreciated, thanks!