Would like to trade my Taipan Veteran Standard .177 with grey laminated stock. Donnyfl moderator adapter. Comes with two magazine single shot tray fill probe in original box. I would like to get an Atomic XR in any caliber or an HW100. Cash can be added for right deal. I have two other Taipan Veterans and would like to try out something different. Thank you for looking. Scope
Also would sell for 900 shipped. No scope included.

Am still getting acquainted with the Ghost Carbine after the work day today the wind was basically still. So I sent these three, five shot groups, bipod front, shoulder as rear bag. Am certain these could be tighter, but am not a benchrest shooter… The goal was to try and achieve similar trajectories with the JSB Exact Jumbo 18s and the CPHPs 14s. The JSBs sent with the PW on 10, the Crosmans, PW on minimum. Holding dead on for both loads at 40 yards. As you can see any small pest is in serious danger with either load.

Hey there guys . . . readers digest - I got a call from a neighbor re: chuckie having setup residence underneath his workshop. Sure enough s/he's a biggun'! I wasn't able to get it (him/her) on that particular day - never re-appeared. I went back there today though and "whoa . . . . there's a small clan of 'em living under there! I saw at least four (three small'ish ones, and "the big one" - don't know if that's big mamma or big daddy ). Cutting to the chase - I managed to pop one, thought it was "the big one" when it popped its head around the far back corner of the shed. When I went to retrieve the corpse though - it wasn't so big after all. Wasn't a "baby" - not that small but wasn't the biggest one I've ever nailed before either. Anyway - I picked it up and placed it out in a grassy area not to far away from the shed figuring predators (hawks, turkey buzzards, eagles, crows, etc ... ) would get it. An hour or so later I went back out there to show to property owner and the corpse was gone. ( huh?? )

Are chuckie's known to drag dead brothers, sisters, etc ... back into a hole? ( turns out this shed has multiple holes . . . ) Chuckie's are principally vegetarians but, according to mr google, they are apparently known to be the occasional meat eaters too. I've never seen a chuckie corpse pull a Houdini like this one - just curious what you guys might think.

Oh -- .25 cal RTI P1 Performance w/the RPB barrel in it, 32g Patriot slug @953 fps if anyone curious.

-=- jd -=-

Haven't been able to do much shooting since moving to Chicago, so I'm selling off some projects. This is a project gun from several years ago when I was younger and dumber. As such, there is one stripped screw in the KAK brace, which can be replaced, and the knurling on the LDC adapter is marred. I currently have it shooting at 14.8 fpe

Has an aluminum AR15 buffer tube adapter and KAK brace that I 3D printed a butt pad for. It includes a Covert brand LDC.

The main interesting part of the rifle, and why I believe it's worth purchasing, is that it has a custom stainless steel air tube from Don Cothran, which was machined such that the tank block is about 1/4" from the face of the valve. While that limits the available plenum, it allows for a very well balanced gun, despite being a bottle gun. The gun is then finished with a drop block and 15ci carbon fiber bottle. This makes the overall package very light and handy. I do not recall exactly what I had the regulator set at, but I believe it's between 1000-1300 psi.

Asking $325 shipped in the US via PayPal. Add 3% if paying via Goods & Service, offers welcome. I am pricing this based on what it would cost to buy the custom Cothran tube, the QB tank block, AR tube adapter, and the carbon bottle alone and not factoring in the cost of a Prod base.

Please feel free to reach out if you have any questions or want an pictures of certain parts of the gun.

I just purchased two air rifles that should be delivered anytime now. I thought it would be fun to have you guys and gals try to guess and see which two air rifles I purchased. I’ll give you three hints. 1. I purchased them from Krale. 2. There traditional style. 3. These two air rifles are siblings.

I have a 8 month old FX Dynamic .25cal 600mm with maybe 300 rounds through it looks brand new. Thought I was going to get involved in some longer range shooting but just never have more plinking and pest control then anything. The gun is just longer and more than I need. It will ship with everything it came with hard case, manual, mag and box it was sent in from Utah Air Guns. 1475.00 shipped PayPal + 3%. Or a check hold till it clears. If there is some serious interest let me know I will take several pictures and get them to you. Gun only or we could talk on scope and moderator. This is the Dynamic Express 600mm. Would also be interested in working out a trade for something like a BRK Ghost HP or something closer to that lower 30in length,higher end guns.

This week end I went to my first AG show. Re ally enjoyed it , saw some great guns and met some nice people. The problem I had was mostly self induced I suppose. The vendor was selling tins of JSB Exact .22 Heavy’s. I was kind of in a happy stupor and not thinking logically. He wanted 15 for 2 so I said how about 8 for one, he said I can do that. Anyway, I get home and want to try them, first few fantastic. Then I looked in the tin and saw a whole mix of crap . Lots of good ones but lots not so much. Even some .177’s a some elongated(stretched) pellets. Should have op-ed the tin at the show, lesson learned. If it seems to good to be true, it just might be.

New, excellent condition. Great little shooter. Has 3 position power adjuster and extra .22 mag. Have many more extras I will throw in.
This think is beyond whisper quiet. Nothing wrong with it. No trades.

Will ship insured and packaged with care.

$1100 shipped with everything and extras. PM me for more info.

Really enjoying my BRK Ghost in .22 but when the magazine is empty, the cocking arm does not stay locked in the open position. I thought it was supposed to do this. Is it a problem with the magazine or the rifle? Would appreciate any input from members. Thanks!

This old girl has a story and i only know part of it. My step father bought new land and was out Surveying saod land, when he stumbled upon a rifle leaned up against a tree. The cocking link is broke so i can only assume someone maybe a kid was hunting when it broke and they left it there. Judging buy the condition it had been there a long time. Its a Huntington Beach marked beeman R10. Bore is in great shape. Rifle will need a full restore. I dont have the time to do it and its way to cool of a gun and story to not restore her. There is rust on the out side it will need to be cleaned and reblued. New seals for sure and new spring. I have no odea what the inside looks like but the bore looks great so id imagine the tube is not bad ether.

Asking price is 300.00 shipped or best real offer

Up for sale is an Evanix Max .25 battery operated semi auto. I bought this a couple months ago and wasn't able to get it to cycle so I brought it to an Airsoft store where they tested the battery, turns out it was bad so I bought a new one, with a new charger. It then cycled perfectly. Holds air indefinitely and is in good condition. Went to shoot it yesterday and the bolt is stuck again. I'm frustrated dealing with it and don't have the time or resources to fix it. It comes with 3 original Evanix mags, and has a sling stud and 2 picatinny rails installed. Once it's fixed it can easily be converted to full auto if wanted. I'm selling it for $500 obo with the charger, 3 mags, new battery, fill probe and manual. Send me a msg with any questions. Buyer pays shipping.

This is off the Marauder FT. Has some bumps and bruises and cracked at the grip. Was repaired. See pictures. Could make a good stock for a project rifle. 70.00 shipped Now 50.00 now 45.00 shipped or best real offer anywhere in CONUS

I have my list of conversations but when I open one nothing appears ??

I tried to report the problem but I get an error??

Anyone else have these problems ??

I have heard all the reasons for why wood stocks are less available, less exciting in figure etc. From old growth availability, to high costs of timber etc. Yet every time look at PBs there is reason to doubt these ideas. Henry arms .22 octagon. This is a production rifle, not limited, or deluxe. Sub 500$, and yet the wood shows significantly better character than most AGs in the same price range.

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but if we've done prior transactions I will accept check or USPS MO.
• CONUS shipping is included in the asking price.
• I go based on PM timestamp.
• Please - no trade offers for this sale.

I have a solid reputation on AGN as an excellent seller and buyer. Can provide member references upon request.

Too many airguns and not enough time to shoot them all. So, I am posting up my Pathfinder in .177. I am the first and only owner, purchased new from AoA in early 2023. It's only be shot indoors or off a bench, so no field use scrapes or marks.

This Pathfinder is tuned to shoot the H&N Barracuda Match 10.64gr or newer Benjamin 10.5gr single die right around 800fps and will post tight groups out to 45-50 yards. My friend Matt, @brawler1588, and I both easily cleared a KYL target at 30 yards with this airgun.

Comes with 2 - 13rnd magazines - the rifle comes with one and the 2nd was an extra purchase from AoA for $109. Also includes all accessories. Will come double boxed with original packaging.

Note: Scope and Rings not included in sale.

New price: $1795 + $109 = $1904

Asking Priced to sell: $1,250 SOLD

I have a pcp that shoot great with 18.3gr pellets. Less than 2/3 of an inch at 55 yards with pellets. But the projectiles I wanna shoot are slugs. Not high gr ones but 20-23gr ones because I don't wanna be shooting a motor with my 20-37ft-lb gun(no matter how I mod it, I don't get more than that and I gave up). As I was tuning for shooting slugs, I found out that my gun doesn't like shooting those slugs at high speed. So, I tried to find the highest speed I can get without getting grouping more than 2 inches at 50 yards. While I was tuning, I found out that at 1800 psi regulator set point and up, decreasing Hammer Spring results in increased speed. I found that out because I have the hammer spring tension highest while adjusting the regulator then reduce the hammer spring little by little for each regulator set point. As far as I know, normally, shouldn't the speed decrease with the hammer spring tension decrease?
I've been pondering on this one for like a week now and couldn't figure it out. So, I posted here hoping that someone would have an answer to that.

My gun specs.
18 inch 1:16 left twist barrel in 22 cal.
1800 psi is mostly the pressure I set on reg.
The air out hole on valve, I think called port, was 4.5mm but I drilled it to be 6mm.
Transfer way (the part on action block that connect the port to the transfer port behind the barrel is around 4.3mm and I cannot find a way to increase it because the hole is unreachable with a drill.
The brass transfer port is the kind with two elongated holes with a bridge between them. Total dimension of the holes should be around 6-7mm.
Using probe with small pin that push the pellets/slugs in. (Slug probe??)
My hammer has short stiff spring that reaches its normal state 6-8mm before the hammer hit the valve. I've recorded the hammer in action in slow motion and I don't see hammer bouncing between spring and valve.

Can the Avenge-X shoot slugs?
HECK YES !
I have the Avenge-X in .177
With reg at 2000 I achieved 3/8" to 1/2" groups at 50 yards with:
Knockouts 4.52 13.4g at 900 to 930fps
Zan 13g at 921fps
Griffin 14g at 907fps
H&N Slug HP 13g at 923fps
From Bench with Buck-Rail Moderator

Sorry if question is redundant. Did search and nothing came up. Did 1st clean/degreasing of new break barrel (Umarex SurgeMax Elite .22) and accidentally got a drop or two of GooGone on the seal. Manufacturer states NOT to use any petroleum based cleaners but GooGone seems everywhere in forums on cleaning so I bought some. I wiped it off immediatey but that little nagging thought lingers. So...is the seal doomed? Will it melt in the mid/long run or is it ok? Thanks.

***SOLD***Aluminum AR Grip adapter and NEW grip For Airforce Talon/ Condor.
$30.00 SHIPPED

***REDUCED***(9) Tins of FX 44 grain
NOW $165.00 FOR the (9) Tins SHIPPED (Foam packed)

We at MRA FT have been preparing to host the AAFTA 2024 Nationals and there has been some pushback from the Hunter class shooters wanting to shoot 2 shots per target as it has always been done. So I have a solution, the hunter shooters will be shooting one course while the remaining classes will shoot the other which is often the case. There will still be 25 lanes on each course with 2 targets per lane, We will have a separate scorecard for the Hunter class, the card will be for a 15 lane, 60 shot match. For instance, the Hunter shooters will be assigned the Yellow course lanes 10 -25 day one, then the Blue course lanes 1-15 for day 2 making a 120 points total for the weekend. The WFTF and Open Class Shooters will be shooting 1 shot per target 25 lanes per day for a total of 100 points for the duration of the weekend. Please respond and let me know what you think I hope that this resolves any issues.

Hello Friends!

Looking to sell or trade a Leshiy 2 .177 cal / 350mm barrel, speed loader and magazine.

Will trade for L2 mags, or other accessories for other calibers (.22 and .30 preferred).

Hit me up with any offers and your number so we can connect.

Thanks in advance!

Mark

My R5M was empty. Last time I looked I thought it was fully charged. So a leak needs to be found unless the adult grandson has been shooting it without topping it off. My fill tank is empty and I was just going to do simple. The fill probe was not sealing so I was wanting to hand pump still. Tried changing the O-rings and it still wouldn't seal. Wondered if when completely empty it needed more pressure to start it sealing. I could crank up the Coltri. Just wondering about the whole business. Anyone with R5M experience? TIA and Be Well, Bandito.

I have a backyard range that I use to practice Field Target. I have a bunch of steel targets, some of the resetting kind as well as a couple of knock down/sting reset and a half-dozen spinners on the sides of trees. My next-door neighbors are great and probably the nicest I have ever had. Today Mark came over and told my wife that two or three times he has heard my ricochets hit his window that faces my range. That window is 10 feet higher than my targets and 20 yards away (almost perpendicular to my sightline) from the nearest metal resetting target (which is 35 yards from my shooting point).

My understanding (and experience) is that my 13.4 gr JSB pellets are of such soft lead that they effectively splatter when hitting steel. So I find it to be a near physical impossibility that my ricochets are hitting his house. That being said, I want to keep the great relationship we have with them and want to keep shooting. So I talked to him and told him I would move target s further away from his house and he seemed to be happy with that.

But is it physically possible?

Cheers,
Greg

Had a LW 1:17 blank in .25 made for the Delta Wolf and the profile came out wrong. Couple areas could be fixed, however OAL was shorter than expected.

Can anyone recommend someone that they have had a good experience with?