Air Arms Utah Airguns Pyramyd AIR FX Airguns Daystate Diana Airgun Depot Edgun West Palm Beach Airguns DonnyFL: PCP Air Rifle Shop and Airgun Moderators The Pellet Shop Airforce Airguns
Saber Tactical Optisan Side-Shot Scope Cam NE Airguns Baker Airguns AGS Topgun Airguns Predator International Huben Airguns Huma-Air Shooting Supplies Hurricane Luftvapen AEA Precision Airguns H&N Impulse Air ZAN Projectiles Hawke Optics Stud Mag Loader RX Target Systems Sports Match Scope Mounts Altaros Banner CTA Thomas Air Hatsan USA Georgia Air Guns Skout Airguns Nielsen Specialty Ammo Patch Worm Weihrauch Sport Talon Tunes Airgun-Revisions JTS PARD ST7 PPP RTI AirStryk Industries Macavity Arms

Dreamline reg adjustment/POI issue

I have a Dreamline classic .30. For the last few months I’ve had the regulator pressure set around 100 (I know it’s low) with my scope perfectly zeroed. Today I decided to take the reg pressure up to ~145. I anticipated that my POI would creep up, as it has in the past when I’ve raised the reg pressure. Instead, my POI dropped so substantially that I don’t even have enough downward elevation on my scope to sight in. Is this unusual? My experience and instinct says that if anything, the opposite should be happening (pellet is traveling faster, dropping less for a greater distance, hitting higher.) Not sure what I’m missing. Any advice would be greatly appreciated. Thanks.

Whistle Pig got unlucky

I just stepped outside to shoot the new pan targets I set up yesterday. I filled the FX DreamLine lite and had the NSA Slugs in it.
In the neighbors yard I saw the WP out and just enjoying the day. Sorry about your luck Buddy!
1 shot, 1 kill at about 85 yards. He just flipped over on his back and did a few twitches.
He's in the field as buzzard feed now.
Was off a swivel/tilt bipod. And yes. That is a Dog Tag in my boot.
GH-Today.jpg

Having trouble filling air tank

Newbie with a new compressor (Big Foot) and air tank (6.8L). After a minor issue, the compressor is up and running. However, when I try to fill the air tank, I must be doing something wrong. When I try to fill the tank from empty, it only takes 3 or 4 minutes, which seems incredibly short to me, and the compressor shuts off at the desired pressure. The compressor gauge and tank gauge read the same. So, I'm figuring at this point, I should be able to shut the tank valve, bleed off the pressure, and I'll be good to go, right? Well, the tank valve doesn't shut off the connection between the tank and the compressor. After I close the tank valve, I go to bleed off the pressure at the compressor, but the tank will drain. Embarrassingly, I thought I had a defective tank valve, so I bought another one.....but it does the same thing. This must be operator error. Can anybody tell me what I'm doing wrong?

20230506_151434.jpg

20230506_151454.jpg

Trouble with stuck deadheads

Assembled and tested a couple elbows, tool marks and all. Installed the right deadhead to check for leaks. It was a little snug fit. After testing I could not move the female fitting sleeve and the deadhead won't budge.??? Okay, tested the deadhead on the left easy fit... held pressure. However, deadhead and female sleeve won't budge either. Please advise (on bended knee).

20230506_183438.jpg

PCP Rifle  SOLD Avanti Cz200s Hunter w/ Magazine 177 Quick fill installed

Selling a good condition 200 type action in a Hunter stock with the $110 magazine system installed as well as the air arms quick fill.

This is a perfect gun for plinking around the yard, basement etc. I converted one into a micro carbine for my daughter and I also have converted one into a pistol for field target.

Barrels have always been silly accurate, triggers are very usable as well.

This is setup for lower power as it comes from factory, but can easily be increased.

I have the plastic cover for the air tube inlet, and the muzzle piece as well. Or can make a small moderator for it if desired.

$475 shipped or trade, what do you have?

Without magazine in single shot configuration it'll be $425 shipped

Contact me:

camsprecisionairguns(@)gmail.com

Or

(Nine16) Five31-2349

20230506_124646.jpg


20230506_124637.jpg

Traditional Rifle  NLA .20 Sheridan BlueStreaks (one left)

Both work though a reseal would never hurt. I’ve never opened them just shot them a bunch. Always kept with 3-4 pumps. Amazing how accurate these sweet ole guns shoot with JSBs.
Sold as seen in pics with levels, buttstock covers, Weaver KV 2+3/4x5 magnification scopes and mounts $325 shipped each.
Add a fixer BS or SS for additional $100. PayPal FnF only.
Trade for RAW barrel kits and AF mag, FX Crown 22/25 380mm and mag, JSR Mini 22/25 barrel kit and mag, NV scope, IR 24+ scope, RAW HMX stocks/chassis, Crown YJ/GRS/ST stock..
I’ve maintained these using MAC1 secret sauce I will include as well as 2 sealed JSB tins of ammo each gun.
*******Hold Down safety SOLD************
Thank you,
Keahi
image.jpg
image.jpg

The FWB 300s is completed (The stock that is)

Finally, the job is done! The Turkish Poppel have an amazing structure, and suits the old Feinwerbau very good I think. But the scope not so much, because of the narrow loading. But it is doable…
Some before and after pictures, and couldn’t resist putting in the Moskus picture hanging in my cabin. 😎
631F527B-E70C-4929-B5A8-580E46AFACE3.jpeg


C5A80959-023C-4050-845D-5676FF2E6F94.jpeg


5166018D-2ABD-40A6-9301-3F5534BF27E0.jpeg


21650EAB-1DA6-495A-88E6-6B12D8DB349A.jpeg


DB8B94D9-C752-4846-A617-AB93D92B1991.jpeg


530324C4-CAF9-4F11-BCDE-1176E4749956.jpeg


E9822C7B-23AF-41A6-8B62-84C0937341CE.jpeg

FX Service -terrific!

I purchased a Dreamline Classic used from an AGN member sometime early last fall.

Recent pictures noticed it would leak down during storage.

I logged on to the FX website and inquired about sending it back for repair. Within fifteen minutes I had a reply. Long story short, to my surprise, they fixed it under warranty. Had it returned in less than three week. Terrific service. Exactly why I gave several FX rifles in my vault!

Thank you FX!

Kalibrgun Cricket Mini .22 super pester

I’ve owned a ton of rifles over the years, and really liked a bunch of them, but this little gal is one of the most versatile, accurate and shoulders better than just about anything I’ve owned.

I can run redesign’s at 750ish , 18’s at 880 , hades over 900 and GTO’s over 1000 if need be, all with incredible accuracy at 30 yards. Having said that, I’ve got .30 and .357 rifles that fill my need for anything from deer, yotes, turkey and squirrels.

Where this rifle really shines is down low, she’s super adjustable and just as accurate at low speeds. With her weight, length, accuracy, mouse fart quiteness, incredible shot count and shouldering capabilities, she makes a perfect weapon for my falconry bird abatement job.

While most of my pigeon work is with birds of prey, I do have lot’s opportunities to use my air rifles when the job is too dangerous for the hawk. With this setup, I’m able to feed the pigeons to my hawk with no worries (lead poisoning).

My second need for a low powered rifle is my chicken coop (inside and out). The rats seem never ending. I literally can kill a couple per night, year around. With lead being toxic to poultry, again I’m able to take advantage of low speeds, superior accuracy and literally an almost silent rifle.

While the majority of all my pigeon and rat shooting takes place inside 30 yards, I did want to see what she was capable of out to 50 yards. I expected very little with 15 and 11gr pellets in the 685-690 fps range, but I was definitely WRONG. In the right conditions, I have no doubt I could make clean, accurate kills at 75 yards on pigeons.

What makes the rifle the most special, is she is literally the CHEAPEST pcp I’ve ever purchased since starting the hobby 15 years ago. 😂

Behold- “Jolene”, the do it all, silent pester! Below is the 5 shot group at 50 this morning off a single bag (bipod was inside and I must have been lazy). I’m not going to add a picture of the 30 yard groups, as they are literally hole in hole.

531D901E-30DF-48F3-8098-6D3A3D74635B.jpeg

10604DE4-F50C-4D79-B1AF-1F939277672A.jpeg

How accurate is “accurate”and what do we expect

Hello everyone,

I had a GREAT morning of shooting a half dozen paper targets with absolutely perfect weather conditions. However while shooting I began to think about how, we as target shooters, forget and don’t always take into consideration some HARD Factual Numbers. I’m not trying to go “geek” but need to have a good perspective of the accuracy of each shot so as to improve on my ability.

Let me explain with the attached target as an example::geek:

Look at the top row, left to right, at number 4 target. When I shot this I said damn and then thought, OK it is not a dead center bullseye but really it is still a good shot. Here is how I was aiming at each target to adjust for my rifle and the scope, I was placing the small round dot of the reticle at the bottom-center of the “1" of the ten (10) in the bullseye. Yep that is how precise I was shooting this target. I brought the target in the house and used my digital calipers to actually measure the distance from the “aim point” ( bottom-center of “1" ) to the true center of the 10-Ring and as you can see it is ONLY .0355 of an inch. Man that is almost nothing, but that tiny bit compensates for my rifle and scope. Look at the rest of this target ( not to brag ) and see how many dead center ( or almost ) I shot on this card using that “aim point”. Now look at the first target on the last row and even though I did hit the 10-Ring ( barely ) it does count as a hit but I was very disappointed :cry:. Again I measured from the center of the POI to the center of the 10-Ring and it is only .1205 of an inch. Man that is ugly on this card but, had I been shooting at the head of a Squirrel at 25-yards, he would be Vulture candy right now :ROFLMAO: .

Well what the heck is all my ranting and raven about, are we too demanding on our equipment and our ability? I guess it all lies with the individual shooter, in my own opinion I don’t think so. With that said it is important to try and keep everything in perspective.

Rifle: Brocock Commander XR .177
Pellet: JSB Exact Heavy 10.34gr
Distance: 25-yards
Weather: perfect

ThomasT
Brocock Commander XR .6.jpg

Stupid Raccoon being a thief

So this ain’t the first time a raccoon has stole my rat bait by untwisting it off it’s mount,but this is the first time one got stuck in it😂.This went on for about an hour before he got it off.Right when I was debating whether to put him out of his misery or leave him with a lesson that may starve him to death🤔,he got it off so he got to return home after resting for a half hour from the battle.Poor bastard was all over the yard, fell in the pond and everything🤣.
Video is a minute or two of if you can use a Saturday morning chuckle with your coffee.

IMG_4655.jpeg


IMG_4656.jpeg


IMG_4657.png

PCP Rifle  NLA Bin tac B&W s45 for sale or trade

Im looking to sell my s45 in order to get a new gun. Iv only shot this gun a couple times, less than 100 rounds through it and have kept it clean as can be for the last few months iv had it. I will throw in a good amount of approved ammo, two magazines, the magazine loader,, fill probe, the red dot , bottle clamp with lazer/flashlight foregrip, and soft case all for $1000 or looking for a fx wildcat or a decent compressor

1683369110218104602656.jpg

1683370402903854639796.jpg

16833706817901078447530.jpg

Well got my GX CS3 today .....lost the lottery...got a bad one....

Well decided on getting the CS3. Ordered it got it today. Took it out of the box everything looked good started on the fan fans run with no problem and push the start button nothing.... pressed the button again nothing....so I guess lost the compressor lottery on this one. I have a CS2 and the battery version of the CS2 both TANKS!!!! Just wanted something with the auto stop and pump a little longer to pump up the "beast" my Uragan King in 30cal. Trying to save on range time more shooting less pumping because the range closes at 4pm because the locals in area took the range to court they lost and won. They lost because time is shorter but won because they can remain open. Not really sure what happened if something happened during the travel here or the UPS driver playing football again if you know what I mean. I have sent them a email are there any other emails or ways to contact them??? I ordered directly from GX themselves. Thanks
  • Sad
Reactions: BanjomanMI76

PCP Rifle  NLA WAR Flex .22/.25/.357 $1000

I have a WAR Flex .22/.25/.357. The gun has a .22 24” unchoked TJ barrel, .25 17” .25 barrel and a .357 24” barrel. The .357 needs a oring groove machined in the probe to be functional. Comes with 1 mag in each caliber. Cobra Regulator with a Cothran valve. In the picture, it has a 700cc tank. That tank has been removed. It now has a 480cc tank. I can send you current pictures if you want. It has recently been resealed, cleaned and lubed. The gun comes with multiple orings for future rebuilds, a .22/.25 moderator and other extras as I can find them. Has a beautiful custom cerakote job in burnt bronze. Best is to call 509-993-9105 and we can discuss. I’d like to get $1000 plus shipping.
IMG_7903.jpeg
IMG_7904.jpeg
IMG_7905.jpeg
IMG_7906.jpeg
IMG_7907.jpeg
IMG_7908.jpeg
IMG_7909.jpeg
IMG_7910.jpeg
  • Like
Reactions: Scotay42

Give away and for sale Junk box

I been in the sport a long time, I get pellets my guns do not like or I just do not like shooting, It goes in the junk box,Bipods,Scope rings, scope levels Sometimes shipping and boxing up this stuff is more than it's worth, So when I sell something , I will look in my junk box and put it in the box I am shipping, Maybe I should not call it my junk box just my box I don't use, I alway or most the time leave instructions if you can't use it or you don't like it ,Pass it on , I am not that nice of a guy , I am just getting rid of my junk or stuff I don't use,
Don't ask me for some junk , Because I am not shipping nothing until I sell stuff, LOL.
Mike

Filter