Hi All,
Selling a used but in excellent condition Vector Veyron 4-16 FFP non illuminated reticle in MRAD. Used it for a short while while plinking at home. Everything works as it should. Includes everything from the factory including a set of Veyron high 30mm rings. Not a scratch on it.
$200.00 shipped PayPal F&F shipped CONUS.
Thanks for looking.
Dave

The big attraction for these guns is of course cost. They also shoot very well when there are are no faults, but quality control has often been poor. I can live with the QC issue if replacement parts were promptly available, but it appears these parts are not available at all. Does anyone know how to order spares for these guns? If so, how prompt is the service?

Does anyone have any good suggestions for an awesome piece of glass that is like a 2-16 or 3-16 ffp?

Looking for a piece for a new toy coming in.. I do like my 3-12 vector but I am thinking I want something more. Going to be a 25 to 100 yard rifle.

My first pcp, a Stoeger bull pup which is a Snowpeak P 35 in a different stock. I thought I might try the moderator on my Diana Chaser on the bull pup but it would require a smaller adaptor. Both rifles are in .22 caliber. Any suggestions would be appreciated. Thanks.

Since wind was nearly zero and I had a new scope to zero, I decided to zero at 25 yards so my RAW would be set for indoor matches this winter. The new scope is a Sightron Competition 45x45 with ED glass. Sure makes the bull look big at 25 yards!


Top of left-hand target is my sighters. Trying to get used to 1/8 moa clicks at 25.

Works way better than my 1st hd ATN gen1 did, I mean WAY better. Works great very clean, sunshade, eyecup and soft case. You will need an SD card if going that route. Watched a doe at 120yds w great imaging w no extra ir.. cloudy moonlit. $375 obo TYD PayPal FnF. Tons of value for useable starter or back up NV under $500. Only selling to get a gen4 NV. Open to trades. Thank you.

Keahi

JD’s Custom Design earlier generation 3D magnetic scope wheel.
Rotates min to max counter clockwise.
Hub fits a 33.76mm +-turret. Believe it fits Athlon Argos but can’t guarantee it. (Be sure to measure your turret)
$30 shipped USPS priority CONUS PP

Check out the beautiful wood on some of our remaining Uragans , Compacts and Kings.
On Sale Now

FX Airguns, FX Accessories for high-powered air rifles

World renown airgun shop for high power air rifle products and accessories.

talontunes.com

Uragan Compact AirGun - Airgun Technology

Uragan Compact AirGun - Airgun Technology

talontunes.com

FX Airguns, FX Accessories for high-powered air rifles

World renown airgun shop for high power air rifle products and accessories.

talontunes.com

Not using this one so it has to go. Like new condition. I added a parallax wheel and magnification throw lever to make adjustments easier.
Asking $155 shipped to your door. I prefer PayPal F&F OR add the fee. It's currently installed on my s510 that has been sitting for months now. The parallax wheel is not in the picture but I will add it later. PM me if you want more pictures. It will come in the original box.

Looking for a Katran in .177 with the standard length barrel and bottle. I have plenty of high end .22 so looking to add a lightweight .177.

Whats the latest? Slugs at 1100 /bc? And some brown “lick-a.”

Looking for a br4-g2 bipod for my pc4 bipod

Or will take $310 shipped and paypal for it

Like new condition comes in factory box, extra feet, and stickers.

Since they stopped making the .177 DAR after the 2nd generation, the 3rd generation is only offered in .22 and .25...

I thought and hoped that I might get some response(s) from anyone who owns a .177 DAR, any generation.

I *think* they stopped making the .177 DAR because of the problems with the barrel(s) in the .177 editions that made/make it hard to get good groups with ANY pellet.
This is based solely on my own experience with a DAR .177 Gen2 which has been hard to match to a pellet with any consistency.

Of course, I could be wrong, but I will ONLY know (and maybe not even then) that, if DAR .177 owners speak up with their experience(s). And even then, I may not know... (smile)

Please DO NOT POST about .22 or .25 DAR versions as this will be of NO help.

Thanks for your cooperation!

Kerry

Unsafe and unethical practices removed for violation of Rule #3.

There was some discussion the other day about what could be done to further our sport and protect it's growth and prevent future regulation.

Some people were for the idea of "flying below the RADAR". Let's censor our words and not talk about issues with terms which are already in use in the arms industry. You know use "cutsey" names for things which are regulated, even if said regulation does not apply to our sport. BAD THINKING TO MY MIND.

First of all, how do you grow a sport you are trying to hide? That's kind of counter productive, isn't it? Second, why live in fear of what might happen when you can take steps to head it off. I posted in that thread that there was nothing which could be done. I was wrong about that. I even made a fair enough case that assertion was correct in a PM exchange with devnull (because politics should be kept between consenting adults in PMs). I was wrong there too.

If we want to protect this industry, in this country, we need a national organization, like the NRA (but apparently not the NRA... because... fear and loathing in California I guess?). We need an organization that can represent our industry and which carries the clout of a million or two million airgunners.

SO VENDORS, MANUFACTURERS, and FORUM OPERATORS ... There is your challenge. Stop censoring the speech of YOUR PATRONS and get together and BUILD THAT ORGANIZATION before the regulators notice you anyway.

Just my two...

Sold

Want to sell RAW. 30.
Excellent condition
Jim
Text 513-748-7777
Scope bi pod not included

Anyone from upstate NY know if these new laws coming will affect anything with airguns

HW110 Lam
Vortex

Now it isn't a $4000.00 bench gun but I don't compete so ...
Thoughts, suggestions, concerns?

Sort of bummed out.. i got all the accessories, and the gun came defective from Pyramyd Air. I'm sending it back for a refund... i was asking for an exchange, but they say they will not check for any damages before sending it out, and doing the $10 for 10 shots would only make sure the gun shoots and will ship it out even if there are visible damages to it.

The gun came empty of air (i thought they come with some air), and the power adjuster does not turn. Hard to see, but it looks like the dent on shroud was painted over with matte paint, because it has a different shine around it.

And something curious, the gun doesn't look like the other NP-03 I see online. It has a different trigger and buttstock on it. Is this an old version that they sent out?

I have had this Award wining Bobcat for two years now. It was tuned by Center-Cut and he won the Sprortman's Division for 100y BR in 2019 with it. I sincerely moved on to Monster Redeigns for compitetion with pellets and only used .30 for hunting. This gun is too nice for the woods.

It has a pictinny rail from Eaglevision. And 1/2 UNF thread for you favorite Donnyfl. Comes with two 9 round mags in he stock.

Great gun! Paypal F&F only. Free shipping to the lower 48 states. Asking $1100 obo. No trades

I got a raptor 30cal on a trade, don't know alot about it. Has a TJ barrel. I got it from someone that said thos gun was working. With what he sent me it's not working right. The regulator that is on it now won't hold air. May be just bad O rings. It can be a great gun . But I don't want to keep it. My loss your gain . I'll take 800$ PayPal F&F or postal money order. And buyer pays shipping. Again it's as is. I would consider trades.

Hi,

We know that FX Impact has a kind of a balanced valve and I think we can reduce the effort needed to open that valve a little bit. Just have a look:




The pressure acts against the surface marked in red. Why not changing its profile so that only a part of the pressure acts along the rod axis?



What do you think about that?

Thanks!

Hi All,
Putting out the feelers to see if anyone has a Vet compact in .22 and a Vet Long in .25?
I prefer Green laminate, black or grey next and then coffee stocks. No red stocks please. I believe the compacts only come in beech but if it's in a laminate stock even better. Would like them as close to factory as possible. Speed dialers are ok.
Thank you.
Dave
860-221-5771

For the past 7 year’s I have had the honor of the constant companionship of my American Staffordshire Terrier, Rocky! Rocky was 5 years old when he picked me to be his friend. I was going through a tough time in life and just coming to grips with my health and mental stability.
The Veterans Administration got me enrolled in a service dog program and after 7 months of training Rocky and I were a certified team, battle buddies for life!
I’ve lost friends in combat and today I feel the same I did back then, my Rocky was suffering and we decided to let him rest eternally. My airgun brother’s, this is a terrible feeling but I wanted to recognize my Rocky. He went to the range with me, went hunting with me and was the best friend in the world. To Rocky!!!!!!!

RIP my brother…

• Edgun Leshiy 2 "Badger" REPR .30 Cal with 350mm barrel, Huma MOD40 5 stack Silencer system Valkryie Carbon Fiber Handgaurd - Purchased from Edgun West

• Carbon Fiber accessory 350cc bottle
• 4 Tins of Unopened FX Pellets
• Will include factory aluminum tube
• Extra seals and magazine pellet holders
• Factory box is pictured to show I am original buyer but will not be included to save on shipping.
• Edgun West REPR valve adjustment tool for FPS adjustments
• Magpie Mlok rail on bottom of rifle for Bipod (Gun will fold with bipod attached)
• 3 mags
• Vector Veyron 3-12x44 FFP scope MilDot
• Atlas V-8 Bipod with pic clamp
• Ivan Tactical Gooseneck pic rail for frame (this allows the bipod and a light to be used at the same time)
• Will ship in FX padded hard-case for safe delivery

This gun shoots excellent anywhere from 600fps to 870fps the only reason for selling is due to unexpected health issues and financial difficulties. The gun and accessories are in excellent condition and have had approximately 7 tins of JSB pellets through it. I have had absolutely zero issues with cycling, accuracy, or consistency with the Edgun. Asking $3,000 shipped to your door with PayPal friends and family. Will ship with UPS