Like new Cricket Carbine in .25. Only one tin through it. Charlie Frear at Georgia Airguns tuned this one, & it's set up for 34 grain King Heavies at 895- still some hammer spring left, so it can go higher if desired. Getting 43 regulated shots from a 250 bar fill. Two magazines, o-ring kit, fill probe included (scope & rings not included).

Did a little write up about it (& the .22 version) here:
https://www.airgunnation.com/threads/the-cricket-twins.1270086/

Like this one just as much as the .22 (which will go to the grave with me), but realizing more & more that I just don't have much use for a .25. Nothing I hunt or pest requires it, & rarely do any shooting past ~60 yards. Every time I shoot in the backyard, gravitating toward the .22.
PM me if you have any questions, and I'll be happy to get all the photos you want tonight.
Will only ship CONUS. PayPal, Venmo, or money order.

$1100 shipped & insured FedEx. Have 17 tins of 34 grain pellets as well (16 JSB MKII, 1 FX), $280 additional if you want them otherwise will sell separate.

Willing to entertain reasonable offers. No trades except will consider partial trade for JSB .177, 10.34 grain pellets.

It is a long way to go for my son, he is about to turn two. He walks, talks, but has no concept of harming, death, projectiles, etc...
But eventually, I wish for him to have fun with pellet guns, while supervised. I will think about unsupervised fun way later.

So at what age, would someone show their son how a pellet gun works? And what product would be ideal?

My wife hates the idea of having actual firearms or pellet guns at home now. But I wish to have him grow up learning the safety rather than being oblivious to all guns.

If I were to use a tape measure to "precisely" mark distances to 50 yards from my bench setup, would I start to measure from the end of the barrel or somewhere else? Or does it even make a difference? There might be a difference of 24 inches for precision shooters who are shooting for prize money.

This is THE PERFECT hunting and short range target shooting barrel.
This is a 500mm barrel, un-choked with a 1 in 14 twist rate encased in a full carbon fiber shroud.
It has a 1/2 UNF threaded end cap to accept standard barrel attachments and moderators.
This barrel was made for me by Rich Dudek specifically for use in 50 yard benchrest competition.
Being un-choked it shoots slugs exceptionally well single hole accuracy out to 70 meters.
If you want the best of both worlds (pellets & slugs) in one compact package, this is the barrel you want.
.
.
$250 delivered CONUS (firm - no trades) Paypal F&F or personal check. Item will ship when funds clear.
Feel free to call me, Joe Polanco at (513)348-0014 if you have questions.
*muzzle break pictured is NOT included.

I have 2 very lightly used Fx DonnyFL Moderators for sale both are for .25 and smaller. Both are in excellent condition but one has a very small indent in it about the size of a grain of salt. Asking $80 shipped, PayPal FF works or please pay fees

I was going to have this thing custom cerakoted and whatnot , and maybe in the future I will take it apart and still have that done but for now its going to see field use so I just threw a black top rail on, kl ex trigger guard, 700cc bottle w/ wrap, and my ATN 5-20 on it.

It also has : Huma high flow probe, huma slug power kit (lighter of the two hammer weights installed), huma extra pressure reg, and huma transfer port along with 2 digital gauges, all of which I installed myself, had one small leak through the atmospheric vent hole but sorted that out and its good to go

It is running the HEAVY SLUG LINER with CF sleeve w/ the ernest rowe style barrel tensioning rear screw.


Reg is at 180 bar , 2.5 lines on the valve, and 5 on the hammer spring adjuster

Shooting Zan .218 30.5 slugs at 1055 fps. Need to test accuracy next at the range with this setting, for some reason the reg is just at 180, screw bottomed out so I can only bring the reg up from here , maybe thats just the nature of the huma extra pressure reg.

Someone elsewhere suggested a few names for the next RTI gun:

bconlon said:

Could make it the demon or exorcist in keeping with priest and prophet naming conventions

Click to expand...

I think RTI's naming is creative.

Here are a few more ideas for the next great gun from the RTI line:

▪ Apostle
▪ Doomsayer, Doomsdayer
▪ Oracle
▪ Preacher
▪ Diviner
▪ Wizard
▪ Mage
▪ Mystic
▪ Seer
▪ Sorcerer
▪ Shaman
▪ Voodoo
▪ Druid
▪ Guru
▪ Alchemist
▪ Mentalist
▪ Medicine Man
▪ Magician
▪ Psychic
▪ ...


Matthias

Ok step away from your benches - dig out your “first airgun” buy one if you have to. Set up your target at 25 yards and FREEHAND 10 rounds. Post your pics!
I’ll be posting my Sheridan Blue Streak results this coming weekend.

On another thread there were some concerns about if the RTI is a good hunting rig....

And a few other concerns about sturdiness....

And big power....

So, instead of derrailing that thread, here goes:

■ RTI Prophet II ■​

Instead of the Impact's 30 o-rings, the RTI has 7* (seven) o-rings.
*[Correction: 6, and for performance version: 15]
And a very sturdy shroud/barrel.

The OEM magazines are nice for left-handed shooters.
And the CARM magazines don't flip left/right.

You want BIG power — but a sturdy gun:
.177cal = 22—37FPE
.22cal = 35—65FPE
.25cal = 44—77FPE
.30cal = 48—100FPE
Plenum 70cc
HardAir Magazine just did a write-up, and they have more power graphs (power—regulator setting correlations):



Externally adjustable regulator 80-180 bar (1150-2600psi)
Externally adjustable hammer spring


Barrels
.177cal: 510mm=20", 1:17.7 twist, choked
.22cal: 600mm=24", 1:16 twist, light choke to accomodate both slugs and pellets, proprietary RTI barrel
.25cal: 600mm=24", 1:16 twist, light choke to accomodate both slugs and pellets, proprietary RTI barrel
.30cal: 600mm=24", 1:16" twist, choked


Caliber change kits available
Arrow barrel available (Arrows X7 2212)


This is a dream gun!

Matthias

Hi everyone! Baker Airguns is having a mid summer used airgun sale. Get up to 50% off all used airguns!

CLICK HERE to shop our used airguns...

Trying to get my Benjamin Prowler break barrel sighted in. When I first got the rifle, I used the Center point 4x32 scope it came with.
I got the windage adjusted properly with very little issue, however, the elevation is cranked all the way "up" and the gun is still shooting too low.
I added a few "shims" to the rear scope mount, to raise up the rear in hopes it would correct this. I have it shimmed so much you can see the tip of the barrel in the bottom of the scope, and it still shoots too low, it's almost there! But not quite.

I got a different scope , a 3-9x40,, exact same issue with this one , maxed out all the way and still shoots too low. This sçope has a direct dovetail mount, no round mounts, so I can't shim this one to try that out.. I am a beginner, what the hell am I doing wrong here ? 2 Scopes can't be off, any advice is appreciated.
I have been doing and am currently doing research on it, just looking for live advice

By saying it's shooting too low, I mean the POI is lower the center of my cross hairs. I need to lower the cross hairs more to match the POI, but I'm out of clicks

While shooting my two Nitro Piston rifles, and one of my Springers, I finally decided that I sure do like the shooting experience of a Springer, over a Nitro Piston gun. Generally, my Springers shoot more accurately for me as well. I don't know if it is made up in my head, or others feel the same way.

It just sucks that Springers tend to be a little more weather/temperature sensitive than an NP. Has anyone been able to get decent performance out of their Springers in the cold? I have never shot mine below about 45 degrees.

I bought this gun brand new, took it home and put it in the safe and never mounted a scope or used it besides shooting a few shots over the chrono. Gun is in like new condition. Comes in case, comes with 5 tins of JSB 33.95 King heavy MKII pellets, 1 magazine and an o-ring rebuild kit. The high power model comes Regulated and fitted with a quick fill system and a pressure gauge. Powering the HM1000X is a 500cc air cylinder with a recommended fill of 230 bar and a high quality German match grade barrel, finished with an integral carbon fiber moderator. The rifle comes equipped with a multi shot magazine or it can be single shot loaded. Machined into the action is a dovetail rail to give the shooter the ability to mount any good quality 11mm scope mount, The trigger is a fully adjustable sporting version of our TM1000 target trigger with an added safety catch. All Aluminum parts are coated for protection and the internal components are hand finished. Hammer and trigger parts are hardened and polished for extra smoothness in reloading as well as making for a cleaner firing cycle. The side-lever linkage and bolt have been hardened ready for a lifetime of work. Hunting Air Rifle High Power Blacked action and barrel 4th Generation Trigger Carbon Fiber Moderator Match Grade Barrel Right handed action Weight 10lbs 4oz (high power) Quick Fill with Gauge Dovetail Scope Rail Length 46 inches (high power) Side lever Action Regulated.

• Hunting Air Rifle
• High Power
• Blacked action and barrel
• 4th Generation Trigger
• Laminate stock, Right or Left hand.
• Carbon Fiber Moderator
• Match Grade Barrel
• Right handed action
• Weight 10lbs 4oz (high power)
• Quick Fill with Gauge
• Dovetail Scope Rail
• Length 46 inches (high power)
• Sidelever Action
• Regulated

Finally getting around to shooting the new HW97 177 a good but this afternoon. I SMELL a burning/smoke odor. I cleaned the barrel good upon receipt and pulled a bunch of patches through it after. I didn't get this on the HW50 after shooting it. Any ideas?

I may regret saying this later!

For sale Yellow Laminated stock, yes a yellow laminated stock Edgun R5M in .25 caliber with Huma regulator installed. Stock have picatinny rails installed. I have only put less than 200 pellets through it. The gun has never been outside my home as it’s too nice looking to get any scratches on it. The R5M is in excellent condition and has spent most of it's time in a gun safe. Shroud and moderator wrapped with high quality automotive carbon fiber vinyl wrap. The gun is tuned for 25gr JSB KINGS at 870 FPS. Includes Edgun fill probe, 4 aluminum magazines and original Edgun regulator in the factory box. Scope/rings and bipod is not included. Not interested in trade. $1750.00 $1600 shipped and I will only ship to CONUS. Accept Paypal F&F as payment or add 3.5% to cover Paypal's fees. BAT Moderator is not included but it’s available for an additional $100 with the rifle. If you have any questions or like additional pictures please message me.

For sale is a new 4500psi CGA 347 Fireman's tank fill adapter. Consist of a liquid filled gauge, Ralston 475bar micro bore hose. The CGA 347 fitting, the bleed valve and the genuine Foster female are from Nuvair. The adapter has been checked for leaks at 4200psi. $115 shipped USPS with tracking number. Paypal F&F please. PM with any questions. (Will be out of town till Friday Sept 9th)
Thanks for looking.

Went out for lunch and when I got home I had a package waiting. New .30 Western Airguns Rattler got from AOA. My initial impressions are good, love the quality soft case it came in. I topped it off with a Hawke Sidewinder 4-16x50 and can't friggin wait to leave for a few days to try it out. I got a bunch of different pellets including polymags as well as some NSA's and High Arc hunters. The build quality looks pretty darn good, the shroud on it is pretty serious looking and the rails are nice and long. I plan to test it out and bring back some details hopefully by the weekend.

I have 1 full tin and 1 about half full tin of JSB .25 King Heavies, 1 full tin of Fx .25 25gr pellets, 1 full tin of Jsb .25 knockouts plus 35 more in the other tin. Selling for $60 shipped PayPal FF works or please pay fees / No Trades Please

I have a Vortex Vanquish 3-9×40. It's in great condition. Will take 75 $ Plus buyer pays shipping. PayPal F&F. Will consider trades.

View attachment 280082

View attachment 280083

View attachment 280084

I have 3 full tins of Fx .22 25gr and 2 full tins of Jsb .22 Hades for sale. Selling as a lot for $90 shipped to conus. PayPal FF works or please pay fees

will work on guanlet 1 or 2 adjustbal reg up to 2800 and m18x1.5 threaded bottle

Selling an FX impact mk3 .22 slug setup that I bought at the beginning of the year and has not even been out of the case and shot. This was originally bought from SPAW and was sold to me after on 1.5 months and VERY little use. It’s super nice and was shooting 31 grain slugs at over 1000 fps according to the previous owner, and honestly I don’t have a single doubt this will do whatever you want it to. The gun is completely loaded out. Only selling to free up some space and money, so not looking for trades.

Build includes :

• FX Impact MK3
• 700mm Sniper Version
• Bigger Carbon Bottle
• Saber Tac Bagrider
• FX Heavy Slug Liner .22 - currently installed
• FX Carbon Sleeve Installed on Slug Liner
• FX Barrel Tuner - Full Kit
• Donny FL Moderator (Stock Version)
• FX Slug Power Kit Installed
• 2 Sekhmet Digital Gauges
• FX Angled Gauge Kit Installed
• All Stock Guages Included
• Stock Barrel and Cover Included
• If you want to pay to ship them, I have HUNDREDS of NSA Slugs and FX Slugs and Pellets

I am not looking to get what I have in it back out, but I am firm on 2K dollars shipped to your door. I will ship the slugs separately, but if you want those I will have to charge actual shipping costs.

Again, No Trades, Only CONUS, Only Accept PayPal.

Scope and Rings shown can be negotiated, but is not included in the price.

Let me know if you have any questions by messaging me in here.

Thanks.

DonnyFL Tanto is new, never opened the bag. Huma Atom is used, it is perfect except for some rub marks on the back of the unit.

DonnyFL Tanto-.177-.22 cal . $95 shipped
Huma Atom .177-22 cal. $85 shipped.

I have 8 tins of FX 15.89 (jsb 15.89) I am looking to sell or trade


I would like $115 shipped and paypaled friends and family for them, my feedback speaks for itself, can take pics if need be.

I will trade for 5 boxes of Zan .218 30.5 gr slugs
6 tins of jsb .177 13.43 gr monsters or a combo of monsters and jsb knock outs in .177

Will come with 1 open tin about 1/3 full as well

All right these may be stupid questions but I am moving to the East Coast and couldn’t bring myself to put the airguns that I put a lot of time and money into into the shipping container that is bringing most of my stuff east.

So they are coming along in the car.

I’ll be driving pretty quickly because I’ll also have some pets with me (I don’t even want to get into the details of that, it’s ridiculous but it STILL beats flying lol) and I am wondering what if anything in need to think about.

One thing i wonder is what will motel employees think if I am carrying multiple gun cases into the room when I arrive… was thinking maybe I should buy a couple of guitar cases and ditch the gun cases just to avoid any awkward and unnecessary conversations.

How about driving with compressed air tanks: a few guns and a pressurized hatsan 1.6L fill station? Is this a problem if I were pulled over?

Anything I need to consider?

Thanks.