I ordered a compact 22 barrel kit.. I get the usual emails and DHL tracking numbers... a couple of days I get an email that it's been delivered! There's no way... I get home from work and I was right...no package. I click the "if you didn't receive your package in the email I got from RTI... tell them I didn't get the package... they promptly reply saying DHL sent it back to their warehouse and they will ship another.. so same deal again.. I got an email... tracking... I check it and tracking shows I should see it Monday.. cool... then today I get a email that it's been delivered... tracking shows it's been delivered back to Spain.. I emailed them back... at this point I'm just over it and asked for a refund... I reckon I'll just buy a barrel blank here in the US and machine my own damn 22 barrel to fit. I've ordered from them in them not to long ago and didn't have an issue.. this is frustrating

might come in handy

This a part 2 of my FX Crown zeroing out to 100 yards. It was tough to shoot in the wind the previous day so I woke up early and got to the field at 5am to beat the wind. My wife called me crazy but I called it dedication, lol.

I was shooting well with the Baracuda 18 out to 70 yards and then had trouble keeping a tight group beyond that especially at 100 yards. The tin I was using had some damage skirt, so that might be a contribution to the bad groupings. I then switched to my AA 18gr that I had in my possession and after seasoning the barrel with it, I was able to get a decent group. I came close to a sub MOA with one group where 4 shots were less than 3/4" and the last shot ruined it and shot low.

It was a fun and productive day of plinking.
Enjoy and thanks for watching.

***SOLD****Listing my 2020 Huben K1 .25 for sale.
I bought it new, from Kelly at KraZCool, March 2021. JUST came back from Kelly. He installed a Huma reg, all orings replaced with premium; see original sale and recent service receipts below. Shoots Mkii's into a ragged hole at 40 yards. I turned it down to 900fps, and it is a sweet shooter. Plenty more power on tap. Comes with 1/2×20 mod adaptor, sling studs installed by Kelly, original double box, all original bits that came with it: fill probe, extra orings, etc. Selling because I've got too many. No trades.
Moderator, scope, and rings are not included in sale. $1475 firm. shipped insured, signature required. PayPal F&F, or you add fees.
Thanks for looking.

.25 Compact LCS Sk-19 - semi / full auto - 28” long

The total length on this custom LCS is 28” - 7” shorter than OEM. This makes this LCS awesome to carry as a hunting rig. The barrel was shortened to 18” and the bottle replaced with a 300cc FX bottle. DonnyFL Tatsu comes with and attaches via a DonnyFL adapter inside of an aluminum shroud. Gun has wear in the usual places on the rails & mod and other minor dings here and there - it is a hunting gun - I’ve posted lots of photos so you can see the condition. i can provide additional photos upon request and or facetime review of gun. I am the second owner of this rig, it was purchased from an AGN member. There is no bottom cap on the grip - I don’t know if one was there originally, but it isn’t there now. Screw inside of grip is not OEM / has been replaced. Ships in LCS hard case.

Scope is a mint TAC Vector 6-24 Compact FFP wearing FX no limit rings. It is short and clear. Non-illuminated. Size is great for this compact gun. Not for sale on its own.

Gun alone, $1450 $1300. With Scope and Rings $1700 $1550. If you buy it with the scope I’ll throw in some partial tins of pellets to get you started. Bipod is not included.

Price includes UPS shipping and is PP gift, check, money order. PP goods / services is +3.5%

No trades.

WTS RAW HM1000x .22 $1390
Excellent condition RAW HM1000x .22
Shots slugs and pellets amazing!
Hammer currently tuned for .23 gr slugs, everything else is factory
Selling to fund my FX rifles.
Comes with.

- HM1000x Raw
- Magpul PRS stock
- DonnyFL suppressor adapter
- OEM suppressor cap
- Ergo grip
- OEM RAW magazine
- Rfile Case

I ship with tracking number and insurance. Accept Paypal.
No trades, looking to raise case only atm.

No barrel inlet, transfer port or probe. What you see in the pictures is what you'll receive. $150 shipped CONUS PP F&F or buyer pays fee.

Up for sale is this Huben K1 semi-auto 2020 model in .25 cal. Awesome gun that shoots JSB 33gr JSBs at 970fps. Haven’t been able to do much shooting with other pellets / slugs as it shoots these 33gr so well. Absolute laser and would make an awesome hunting setup. Only selling because this gun is a beast and don’t need all that power as well as to help fund another project. See review below…


These guns run new around $1900 plus shipping and taxes. Asking $1475 shipped.

PayPal gift or add 3%! Serious Buyers ONLY Please! I'm on AGN with tons of positive feedback, so should you! Thanks for looking!

Text or email for additional information or pics!

Email: [email protected]
Text: 312-498-9987

Thinning my gun collection to just a few. Selling a like new AEA Challenger Pro in 22 cal. Purchased new from Utal Airguns beginning of April. All original, box, paperwork, 2 mags. I tuned it to shoot 18 grain JSB pellets around 880. Huge shot count of 90 plus before it falls off the regulator. $570, plus shipping. scope and bipod not included.

Have to say I'm getting used to the new format. I cant even imagine how much work Michael put in. I'm in awe of his dedication & ability!

Wanted to give some (hopefully) positive insight. I think one of the things I'm REALLY sorry to see go is the "All Topics" category. It allowed me to quickly (& I emphasize QUICKLY) view the currently running topics & decide what appealed to me & what I wanted to spend time on with my morning coffee before getting on with my job or chores. Now, I have to go through EACH forum & I've realized it's way more time consuming this way (sometimes the amount of time I can spend with my favorite forum is limited). The "All Topics" allowed me QUICKLY weed through what did & didn't interest me & appropriate my limited time more efficiently. So far, that's the thing I miss the most. Make sense? I'm getting used to the "new" but REALLY miss that one "old" thing. Make sense?

15 unopened tins plus one large tin with about a tin and a half of pellets that have been lightly oiled with Slick 50.
Two of the cans slightly dented as shown, that’s how they came from Pyramid. Sold my last .177.
$200 shipped Priority

Cricket II WSA 22 cal. Purchased from AOA in November of 2021. Tack driver. Target photo 50 yards in 5 mph breeze.
Comes with original box, mags, and rifle. Scope, moderator and bipod not included. $980 plus shipping.

When we bought our house, the first few months I was too busy with home renovations to act. But there'd be raccoons fighting on our deck at night. Massive colonies of rats in our trees and the vines along our fences, and mice everywhere. The symptoms were bad:

1) taking a flashlight into the back yard at night, you'd see 20+ rats looking back down at you from the trees
2) raccoons coming in and out of the yard all the time
3) rats eating the wires on our vehicles in the driveway

So I got serious and started trapping the animals. Haveaheart for the young raccoons. Goodnature traps for the rats and mice. I got a small Haveaheart trap for the rabbits as well as most of the rabbits around our house appeared to be diseased.

The pests appear to be essentially all gone now. I can leave good food out in the open, and nothing touches it for days.

I got an airgun as well, but mostly this turned out to be for dispatching injured trapped, or sick animals. I haven't needed it as much as I thought. In the beginning there were some pesky raccoons that were hard to get any other way, but now that the population is under control, my airgun is largely idle as are my traps.

I'm a little surprised by this. Some of our neighbours feed the raccoons. Maybe the pests are still in the neighbourhood, but they know enough to stay out of our yard.

Each spring I see a new litter of raccoon pups that come by, but even they seem to be increasingly wary of our yard. They used to all come through, and I'd get them all. This year I think only one raccoon even looked into our yard. It did not dare trespass.

Is this a familiar experience? I kind of figured the raccoons would come in unrelenting waves. That's why I feel like I'm a little over-prepared. I live in a semi-rural environment, surrounded by a mix of acreages and farmland.

I have an nsa pin probe and carrier as well as a huma high flow transfer port added to my M3. My 2nd reg is set at about 80psi. When I'm shooting, the hammer spring adjustment seems to have no or only a tiny difference when set all the way up to 16 and adjusted back down to 1. I have tested this over nearly the entire valve adjstment. The valve adjustment will change speed, but the hammer adjustment doesn't. So every time I adjusted the valve I then ran through hammer settings top to bottom. Valve adjustment makes a change, subsequent hammer adjustments do not. I haven't had that system part yet to see just how it works, so I'm at a bit of a loss. Does anyone have some wisdom to share here? Thanks

Here is how I’m keeping my M3 “recipes” organized. They are blank ID printer cards.
I would love to see any other ideas you guys might have.

I always put them on my scopes, but seriously, does it make any real difference under normal use? It does add weight, and on some guns any weight that I save is an advantage. Opinions?

New Site is fire!
Good job Michael!

I just received my new to me wood stocked 22 Sigg ASP.

Here is my first shot on live game. About 25 yards off hand across the creek. It flipped him.

Penny did an awesome retrieve.

mike

I have a late model SK-19 with Kraford Lypt butt plate and Custom Huma Shroud. Takes standard AR-15 hand grips. (Rifle case, accessories, scope, bipod, $1750 you pay shipping and insurance, no shipping to anywhere that bans them, your responsibility to check the laws).

I modified a full-length Huma shroud to fit the gun. Even though it's a smaller diameter it is much quieter than stock and even outperformed the Hugget Snipe using the DonnyFL adapter. I do have a couple of extra shrouds that I could sell separately.

Original rubber butt plate and stock shroud and moderator are included.
It also included a DonnyFL 1/2-20 adapter since I won't need it anymore.

Works great, no leaks. I did dent the top left rear corner as pictured. Does not affect function. No other scratches.

Bipod is included because it works great. Went through a lot of bipods for this gun until I got this one. It's too big for my other guns but perfect for this one. That's how I dented the little plate, flipped over with a former small bipod.

Factory case included.

Rifle with above accessories ($2650 purchase cost) for $1950.00 shipped insured to CONUS

Scope not included but can be added for $150.


Pictures to follow.

The gun works perfectly. Awesome trigger, as you would expect from this brand. Includes box and two cylinders.

Will take PayPal check or money order. $30 will ship it anywhere you want it to go in the US, or you can pick it up in the Phoenix, Az metro area.

Can provide more photos on request.

2nd owner huma reg dw power tuned factory box case extra stuff fill probe 2 mags and silencer 2. boxes of nsa slugs scope and rings 1,000 PLUS SHIPPING usa to only legal zones postal mo check pp add $50.00 pm for extra info thank you paperp shoots best with nsa 47 i have shot sub 1" groups ]@100yard[ reason for sellin getting out of air guns no trades

Purchased new March 2021. Very good condition. Shoots greats. Will ship in original box with everything it came with. Only thing I've done is turn down the hammer spring a bit. It's averaging about 750 fps and gets about 70 shot on a 3300 psi fill. Price is $1100 shipped CONUS, PP F&F or buyer pays fees. Scope and bipod not included but can be for additional $150.

Letting go this late model (Dec 2020) PERFECT unmolested Impact MK2 Sniper with 700mm Superior .25 or .30 barrel (your choice). Gun was originally purchased as a .30cal in Dec 2020 from Utah Airguns and has had less than a tin of pellets shot through it. It still has 1.5 years of FX Factory warranty left. It's in nearly new condition and it shows, not a scratch or blemish on it! Gun is equipped with a 580cc Carbon Fiber bottle and a few minor upgrades. It has the M3 shorter throw cocking lever with larger, No Slip handle, and an M3 16 position Power Adjuster knob. Also included is a custom taller Soft Touch Ambidextrous Cheek Piece (you're gonna love this! Only 6 exist!), and a Custom Buttstock. Stock FX Buttstock and Cheek Piece in perfect condition are also included. As I stated above, the gun is originally a .30cal but I've also got .22 & .25 setups for it so you get to choose which you prefer. All liners available are Superior pellet liners. Gun comes with one magazine in caliber of your choice and additional magazines are available at an additional cost. Gun will ship in Original FX Hard case with all documentation. ** Scope & Bipod pictured are NOT Included I am more than happy to answer any questions via PM, Email, Txt, or Phone Call. All I ask is you don't waste my time or yours if you're not serious about buying the gun. Lowballers, Tire Kickers, Scammers will be ignored.

Price is $1575 Shipped (Conus) & Insured. Payment accepted is Paypal F&F or G&S if you cover the fees. Zelle & Venmo also accepted but not preferred.

For sale is this Gen I Impact. Selling for a friend that is the original owner. Bought new from AOA when they were introduced. He never changed any factory settings, just scoped it and shot it. He noticed last year that it had lost air pressure and sent it back to FX-USA for a reseal. It's been sitting in the gun safe every since. This gun needs a home. Looks and shoots like new. No issues or problems. Included in the sale are the gun, 3 magazines, and the FX stackable moderator as well as the hard case. Priced for a quick sale at $1175 including insured shipping to the conus. Pay-pal f&f or + 3.5% or usps money order. Not interested in trades or offers at this time. Please deal by pm. Thanks for looking........Herb

I changed some privacy settings, Default time zone was wrong, found out where to set "Dark Mode" (and its cool...)

Has made the new software much better for me. Massive upgrades are always a pain, but I'm geting it dialed in.