I have quite a few birds that look the same. Males are obviously easy to spot, but these females in the pics from my scope cam, can someone tell me for sure these are HOSPs. Thanks.

They have the conical beaks and longer legs and tails, but its hard to tell.

Soo I really don't want to sell this but I need money to buy bullet casting equipment.. this is a 2021 huben k1 22cal and its works great. I have shot birds out to 100 yards with this gun. It likes 25gr fx 22cal pellets and .218 cal h&n slugs.. I'm asking $1200 shipped to your door.. PayPal f&f .. u.s shipping only
(Accessories not included)

Hello everyone,
I wanted to post a review of the results I had dealing with Motorhead. First, communication is a two-way street and MH, once he returned from vacation, promptly replied to my emails and texts. I even had a couple of very nice conversations with him over the phone, a very pleasant man to talk to and a wealth of knowledge! I sent to barrels to him for tuning and both came back performing extremely well. I've been struggling to get my Daystate Safari .22 HP to shoot tight groups at 50, 75, and 100 yards. I ordered a new barrel and while waiting for it I decided to send the Safari and a Vulkan 3 (.177) barrel to him for an assessment and tune. They both came back shooting much tighter groups than previously. I realize that's a very general and subjective statement, but I shoot so much, I need to do a better job with documentation...I've attached several pictures of the groups from the Safari at 50-75-100 yards. The wind was 3-5 mph with some gusts to ~10. I shot about 10 rounds per target. I'm very satisfied with how the guns performs now versus before Motorhead worked on it. If you are after improved accuracy, barrel tuning is the way to go...

Thank you Motorhead for all the time talking and educating me on your barrel tuning techniques. It's very much appreciated.

Good morning everyone,

Received my new RAW HM1000X Chassis .22 cal in late on Monday and performed all the cleaning and setup work on it. Was able to shoot a couple of rounds before dark enough to roughly site in the scope. It was tuned for the JSB Redesigned 25.39 but nobody had them in stock when I ordered the rifle so I am shooting JSB Monster 25.39. However I am pretty pleased with the way theses pellets are shooting today, that is 5-shots at each target and 4 in one hole on #3. A dime will cover all the shots on all five targets, needless to say I really enjoy shooting this rifle. I have eight tins of JSB Redesigned in transit so I will be able to wear the new off this rifle real soon

Have a great day,
ThomasT

Let's say we have a 22 & a 30 impact side by side (M3) besides probe and barrel, is there any other differences? IE: valve, hammer, springs, regulator.
What I'm getting at is, if I were to buy a new M3 and want to convert calibers, would I buy a 30 and 22 kit or buy a 22 and a 30 kit?
Of course I know the magazines are different!

A quick video on a few things I have noticed about moderators not all being the same. Some accuracy changes.


Have any questions feel free to ask.

NO TRADES CASH ONLY. Selling my Airforce Texan lss .257 with hawk sidewinder fx no limit rings. it has a light scratch on the side of the shroud. Comes with 2 molds a 3 cavity arsenal 257420BT with handles and a 2 cavity lyman 257420 with handles



Shoots great I just don't use it anymore
Also comes with a .257 sizing die 257420 top punch and press

Rifle, molds, sizing equipment, bipod, and scope $1200 obo plus shipping

Selling my AEA HP SEMI-AUTO CARBINE with Saber Tactical bottle clamp pic rail for attaching bipod or other accessories. It's in excellent condition operationally and cosmetically. Folding stock, holds air really well, powerful, reliable, and accurate. Sale will include bipod. Comes with one magazine and 2 fill probes. Will sell and ship to cont USA only, no AFO/FPO addresses. See photos below. Only $630 shipped.

For sale is a .35cal GMI Swage dies. In very very good condition!! Only used to make about 100 slugs because soon after receiving it I received my new NOE moulds in .357 and also my Corbin Swage dies in .357 so there was little need for me to use it. I used it mainly to do videos and instructionals for future GMI Swage users.
This is an excellent item to own!!! This allows you to be self-sufficient and to also possibly have a "side hustle" selling slugs. I suggested these dies to Andrew owner of KC Slugs and he has had awesome reviews and has become a good friend of mine as a result.
Currently you cannot buy any of the dies from GMI because I believe the company is in transition of some sorts and it isn't clear when they will begin selling them again. Corbin dies are currently on a 18month to damn near two year waiting list .

Sooo, here you go, a .35 cal die in two weights 91gr & 78gr slightly cup based (I say slightly because depending on how you press they can be totally flat). Once you get used to how to use them there is SOME slight adjustment you can do to get lighter weights, ive made 68gr'rs with it.
These perform AWAZINGLY!!! I've used them in several platforms under a few different tunes and have achieved excellent results. I've tested them in my Bulldog, my Texan SS, Edgun leshiy Classic (yeah my Leshiy), AEA Max, Hatsan Carnivore (they were so so outta this gun, but it needed to be tuned so I blame the gun), and my Ataman 357, all shot them very well.
Ok time for the brass tax! I'm asking $600 for the die regular price with the setup I have would cost you around $800. The reason I cutting the price is because I have the whole other dies that belong to the set that I'm gonna sell also so I figure I can make up the cost to me later. Just as a informational I'm gonna also let go of a .25cal, and a .22cal die also. If you want those too get at me thru PM and I'll tell you about them too. I'm looking for a new gun so I'm willing to trade them all for the right gun (DON'T EVEN COME AT ME WITH A AEA GUN as a trade unless it does $40 favors ). I know all together they would cost close to $2k so if the gun you may wanna trade is around $1400 and up in value I will strong consider it. I would love a M3 Impact or a Mk2 or M3 Impact in .35. I would even consider another Edgun L2 (I am a big Edgun fanboy!) or a Huben in .25cal

Brand New LCS SK19 .25 Caliber $1700.00

***SOLD***Crosman 1701P Silhouette Pistol, everything in EXCELLENT condition, NO leaks, missing front sight post. (Come from factory NO REAR Sight)

$320.00 SHIPPED $295.00 SHIPPED

Well last weekend I met with Gerry52, and Centercut and we hit one of the vineyards we have a permission on....I had the Vixen long in 22, Gerry was shooting his bobcat 22, and Mike was shooting his mini cricket 22. We all took different areas on the vineyard and after about 10 minutes I get a text from Gerry 1 down, then 2 down....Then Mike jumps in with 1 down.....Crap I still haven't seen a squirrel yet....Then one pops out and I grab my yardage wheel and proceed to pull it off and the turret spins.....double no idea where it is going to shoot now....

Gerry..... 3 down, Mike .....2 down...

Off I go through the vineyard back to my car and I pull out the Huntsman in 177 that I sighted in maybe 4 weeks ago....going to set it up for FT....First squirrel down 53 yards, then one at 55 yards....Head over to where Mike is sitting and get one at 73 and 70 yards.....At the end of the hunt we totaled 20 squirrels and I think Gerry was the winner of the day with 10, I think. I know the guys will jump in and correct me

Even with the rifle taking a I still had a great time shooting with friends and seeing what I can do with the huntsman...Mike took this picture, a 70 yard uphill shot...We mainly shoot off bucket and sticks or use the fence for a rest.

Tony P.

The 20th groundhog of the year. Sliced this bastard diagonally and the slug popped out the throat leaving him speechless.

I have a titanium snakeskin/battle worn trigger made by Lee dean agate up for sale. $100 obo shipped.

Thanks for looking

James

Selling my hard to find Daystate Red Wolf Safari in .30 cal with pic rail for bipod or other accessories installed by Airguns of Arizona. Comes with battery charger and two magazines. It also includes a PRS Gen4 buttstock with monopod. Bought it a couple months ago brand new and never really used it that much. Just tested it a few times and had pic rail professionally installed by Airguns of Arizona. Please see photos below.
ONLY airgun is for sale. Bipod and scope are NOT included. Will sell and ship to cont USA only. Payment by PayPal friends accepted.
$2500 (Airgun + 2 mags + battery charger + pic rail installed + PRS stock with monopod + Free shipping).

.

Won it in a raffle at RMAC 2021. only open the box never mounted. asking $450.00 shipped zelle, Paypal FF, or Paypal regular + 3.1% conus
i can send more pics upon request.

i got a very good shape uargan gen 1 25 cal has derrick wall custom adapter to run any m18x1.5 tanks has carbon shroude and new 3.6 tank comes with or with out donnly fl tatsu just testing water on this rifle comes with 2 mags and fill probe i take ldc and tank and drop prise to 1000$ shiped

For sale a like new 18 cu ft omega air tank. 8./20 test only selling to buy a bigger tank. Great for packing in back pack with hose
$285 shipped

5 shot group at 50y in light wind. Thought about going more but knew it could only get worse. I’ve done small groups like this before but not centered up like this one. 40gr slugs

Mike

If you had access to all the latest gear!

WTS My AEA Assassin .22 , Carbon fiber shroud and moderator . 350 bar fill shoots around six mags 12 rounds per mag , 450cc carbon fiber tank , shooting 18g pellets at around 1000FPS , comes with three mags . Asking $725 .

I will also throw In AEA Sparrow .22 ...Both guns look and shoot like new . Scopes not Included . Pay pal friends and family , I will go 50 50 on shipping . My email [email protected] ,

I have to many guns , some have to go .

Amazon Prime Day is here again. I’ve been going over some things I’ve been wanting and haven’t seen many deals related to airgunning. If you do I figured it could be beneficial to compile the deals in a single thread to help AGN members find bargains and save a few bucks.

So far all l’ve seen is an already cheap bbq cover that can fit an Alkin compressor that been discounted a little more. “32 Inch 2 Burner Grill Cover” https://a.co/d/hqx8oLr not a bad deal to spend $13 to protect a $3k compressor, I guess it’s like buying a cell phone cover to protect these affordable expensive computers we carry around in our pockets. I saw @Skydivingmiami post about this cover in another thread and noticed it’s a little cheaper today. I’ve looked at some tripods and don’t see any major savings. Haven’t looked at any glass yet. I’m pretty sure there are some deals to be had so let’s get to and post some links.

**I realize some members are anti-Amazon. This thread is for those who are Prime members and AGN members looking for airgun related items and wish to save a few bucks.