HW44 with a HW100 carbine air cylinder. It works!!!!!!!

[AJ_Roberts]

I think the end play would be to go for a Rink stock, they look awesome

 

[h2okenny]

I have enjoyed modifing my HW44 into a carbine w HW44 barrel then a HW110 barrel 310mm long, throughly enjoy this platform
View attachment 515792View attachment 515793

I have enjoyed modifing my HW44 into a carbine w HW44 barrel then a HW110 barrel 310mm long, throughly enjoy this platform
View attachment 515792View attachment 515793

That looks great. How much velocity did you gain? I can definitely see a 310mm barrel in my future.

 

[h2okenny]

I think the end play would be to go for a Rink stock, they look awesome

If you're interested in a cheap carbine setup try lwm211's mod. Granted, it's not nearly as attractive as the Rinks, but it works great. Like Leon, I had enough stuff to try it out without buying anything.

HW/Weihrauch - ***Made Butt stock for HW 44***

Going thru my parts yesterday decided to see if my HW 44 butt stock idea would work. Parts of adapter consist of #1- Weaver scope extension 1/2" high riser base adapter,(tried low profile base it had to much flexibility), #2- Screwed inverted piece of picatinny rail to bottom of extension. #3-...

www.airgunnation.com

I actually sold my Rinks and currently have all three of my HW44's with this setup. Just seems to fit me better.

 

[jarmstrong]

h2okenny, I do not remember what my power level/velocity was before and cant find where I wrote it down,
but now it shoots 735fps AA 16gr

I messed up, because that is a question I want answered also

 

[AJ_Roberts]

Ratworks carbine air tube and fill assembly arrived



75g weight saved and 40% more shots, so pushing 140 for my UK spec Sub6 .177

 

[cavedweller]

It works like a champ. I had to remove a small amount of the plastic shroud near the end of the barrel for the added length of the HW100 cylinder and grind down the bottom side of the moderator adapter slightly to clear the gauge. Shot count went from mid 20's to 40 shots (.177). I also added a homemade moderator. It's obviously not as quite as the Weihrauch but actually still pretty quite to my ears and 3.25" shorter.
I purchased a HW100 bullpup a while back and added a longer Ratworks aluminun cylinder so I already had the cylinder, so I had no expense for this mod. I couldn't be happier with the outcome.

View attachment 200258

View attachment 200267

Saweeeet

 

[AJ_Roberts]

AJR Airgunning on Instagram: "40% more fun, Rat Works air tube conversion #hw44 #pcppistol"

0 likes, 0 comments - ajr_airgunning on November 29, 2024: "40% more fun, Rat Works air tube conversion #hw44 #pcppistol".

www.instagram.com

Still awaiting another shroud to arrive, I don’t want to chop up my original because it has all the spec and serial numbers on it, so I can put it all back to original condition if I want

 

[lwm211]

Pictures of my improved version butt stock mount using a UTG or Monstrum rail adapter on top

# 1 stock fully collapsed
#2 stock fully extended
#3 stocks set up for vertical picatinny rails these are used on several of my pistols.
They all work very well for minimal parts and cost.