Here ya go OldVet! 32" OAL FYI....Can you post a pic of the whole Taipan please OldVet wants to see
Upvote 0
What did you order / receive airgun related today? Thread
- Thread starter Septicdeath
- Start date
Somehow I couldn't bring myself to hit the "like" button but I get it.Had to order a new pair of skibbies after my foster popped off @ around 2.5k. Fun times. Always make sure your QD springs back and is locked
.
View attachment 555604
Upvote 0
Love it , and the feet on the Bipod are really cool to me they look like little tank tracks. What is the Bipod.
Upvote 0
Glad you like! It's an ACCU-TAC PC4 bipod and I installed their aftermarket P-SKI Feet. The sled parts rotate (adjustable tension) 360 degrees for uneven surfaces. It's and big heavy but very sturdy bipod, costly too but people sell like new used all the time.
Upvote 0
200ct of 40gr and 32.8gr VK along with r5, 47, and 59gr solids for the Vulcan 3 .25!
40gr javelin on the left for comparison.
40gr javelin on the left for comparison.
Upvote 0
I will give them a try tomorrow I see how they shoot, so I can input the ballistics information into the term night. Tomorrow will be another night of coyote hunting.
Upvote 0
Received in mail today. Had enough frigging around with my last PITA chronograph. Thinking this should serve me better, time will tell..
Upvote 0
I hate coyotes one ate my kitty.
They can mate with Dogs , but are considered rodents as they have 3 toes like a Rat. I don't kill animals anymore. I was taught not to kill it for sport , but if you eat it that's ok
I did eat some rainbow trout that I caught at Safeway.lol.
Upvote 0
I know most hate yotes due to experiences, I haven't had any bad experiences with them. Buuuut, it can't be helped. They are eating the animals around the neighborhoods/HOA/Golf course and it's no fault of theirs. Too many homes are being built pushing them out of their habitats leaving them in the city to eat what they can. This particular location they decimated the fox population around thr golf course so they want them gone.
Upvote 0
Maybe against the spirit of the thread, but I downsized a bit today. Sold a thermal spotting scope. Guy paid in cash. My wallet hasn't been this swollen since I last visited Japan (and my host paid me in cash "March scope money").
Last edited:
Upvote 0
Well well well Epic airguns sent me the V2 regulator as seen in the One model, this sucker go strait into the Two in 3- Two - 1
Also money in my account, so that Coltri compressor i talked about, i go and buy that Saturday amd then strait off to the range to set it up.
CUZ daddy is down to 150 bar on both his bottles, and he got lead to sling
Also picked up a good deal on 4 tins of spray paint for the steel at the range.
Also money in my account, so that Coltri compressor i talked about, i go and buy that Saturday amd then strait off to the range to set it up.
CUZ daddy is down to 150 bar on both his bottles, and he got lead to sling
Also picked up a good deal on 4 tins of spray paint for the steel at the range.
Upvote 0
Okay.
This was a pleasant surprise
This regulator will regulate all the way down to 30 BAR, but a quick and dirty test in the living room tell me i dont have to go that far.
I turned it 1/4 revolution too far down and so the regulator just worked as a valve, so gently opening it until i heard air passing thru it and i saw 30 BAR on the gauge, still pushing 10.4 gr JTS dead centers that is a tad too little so i gave it a bit more air.
And with the hammer just in a coincidental place as i had it backed off as i also did a minute firering valve adjustment.
Well i can not complain on the shot string i got.
Okay speed still a bit lower than i would like to start off with, but then again this was just to see how low this Regulator would go, and it is plenty low.
Seem like i am ready to sling some light 10.?? pellets this summer, and i also will next outing now that i am sort of dialed for that, but rest assured before it get dark i will also be slinging the 13 gr Zan slugs.
One thing to get used to though, this regulator like the factory Two one adjust in reverse, so back it out which with the Huma REG give more pressure, here that will decrease pressure.
This V2 regulator also turn more easy than the factory Two one.
The Two just sipping air now.
This was a pleasant surprise
This regulator will regulate all the way down to 30 BAR, but a quick and dirty test in the living room tell me i dont have to go that far.
I turned it 1/4 revolution too far down and so the regulator just worked as a valve, so gently opening it until i heard air passing thru it and i saw 30 BAR on the gauge, still pushing 10.4 gr JTS dead centers that is a tad too little so i gave it a bit more air.
And with the hammer just in a coincidental place as i had it backed off as i also did a minute firering valve adjustment.
Well i can not complain on the shot string i got.
Okay speed still a bit lower than i would like to start off with, but then again this was just to see how low this Regulator would go, and it is plenty low.
Seem like i am ready to sling some light 10.?? pellets this summer, and i also will next outing now that i am sort of dialed for that, but rest assured before it get dark i will also be slinging the 13 gr Zan slugs.
One thing to get used to though, this regulator like the factory Two one adjust in reverse, so back it out which with the Huma REG give more pressure, here that will decrease pressure.
This V2 regulator also turn more easy than the factory Two one.
The Two just sipping air now.
Last edited:
Upvote 0
Upvote 0
Received my Birchwood Casey Shooting Rest today. My can of spray Max 2 K clear gloss just came in. It's a paint with a 2 part mix paint , and hardener built in.
Upvote 0
600mm .22 FX barrel and shroud, power plenum and set of [4] brass hammer weights along with 23 grain Javelin slugs for my Dreamline classic. Going to play around with slugs for a bit 
Upvote 0