Just got this one from a fellow forum member, put the red dot

on it a sighted it in. What a great pistol and fun to shoot in the .25. cal.

Has anyone noticed any increase in accuracy after installing a barrel stiffener on your Ghost?

Central Oregon is infested with devastating ground squirrels ( Beldings) and as a seasoned culler, I’ve done my share of eradicating them. Yesterday, (6-29), I helped out a rancher in Bend by squishing 79 in 2.5 hours with my FX Impact 700 .22.
My record for a three hour culling is 136. While certainly not a huge number, it did satisfy my addiction.

Guys i need help the Repr gauge in my Leshiy 2 is locked and i dont know how to fix it. My Leshiy doesnt have the secondary bleed screw in the rear so thats not an option. I tried loosening the black adjustment cap and it feels like its under pressure and idk what to do.

Hey those folks with taipans. I have an issue with my veteran 2 tactical model.

I have had it about a month, and shot a couple tins of slugs through it. So maybe 300-400 shots with some different pellets thrown in for good measure. I forget the count per tin. So it’s pretty new.

I noticed the past few days it’s losing quite a bit of air overnigh…it seems to stop losing it at about 100bar. I put a balloon over the barrel overnnight and it was deflated, so that’s not the leak point.

I’m thinking about taping a balloon to the fill probe foster end and installing the probe to rule out a stuck check valve.

I’m hesitant to use soapy water on my new rifle, but will if that’s the preferred method…

Any thoughts on spots to check next?

i’m looking for part #28. is there anywhere i can order this that ships from the U.S.?

The gauge on my pcp hand pump had a liquid in it when I bought it. I just noticed it no longer does and the area around the gauge is oily. Is it possible for the liquid to pass into the rifle when I'm pumping air into it? I'm concerned the liquid might have gotten into the rifle. So far the rifle seems to be operating fine. Thoughts?

Is there a method to verify a particular chronographs accuracy?

How do you know that the chrony you are using is accurate, no matter how fancy or expensive it is ?

Many chrony's are adjustable, so that you can equally match another chrony, but how does a person correctly establish and verify the accuracy to begin with?

This is in excellent condition. Any cosmetic spots you see are either dust or smudges...cosmetically it's 95%+, glass is perfect, and mechanically is perfect. This is a premier precision/long range hunting optic that doesn't weigh a ton, under 26 oz. It is SFP and has a half mil reticle accurate at 24X which means at 12X it can be used as a mil dot reticle. All the features you need plus it focuses down to 10 yards. Comes with a small custom parallax wheel, original contents and box, Tennebraux scope covers, and a sunshade. The medium height 30mm Hawke picatinny mounts are included. Excellent glass quality...maybe the best I've looked through personally. This is a $1200+ optic easily...I'm asking a final $800 TYD in the CONUS, PayPal preferred, no trades please, thank you

Need to know how to convert to HP air and what pressures to utilize? It is a .20 cal purchased from AOA last year. I have been using CO2 so far. Have some parts and butt stock but no tank. I own PCP guns and compressor and tank. Hand pump too. I just need to figure out the parts needed for HPA? Anyone wish to explain? TIA and Be Well, Bandito.

It was a good day with some of those light wind gremlins. Started overcast and then the sun came out to play. Dennis earned another 750 in Sportsman.
I thought Joe & I were going to fisticuffs after the 1st card but I missed some errant air. Buy a Thomas...
2nd Match Dennis & Keith slugged it out w/Keith taking it

New scorecard look from the new score tracking software Grant is making for N50. 1st use results. More details coming as it goes. It's going to be great.






It's an amazing pleasure to shoot a new purpose built air rifle.


National 50 Nationals NRA Link NRA Whittington Center : 2024 N50 National Championship www.nrawc.org

Link to N50 Nationals Events — National 50​

Thanks Perry for the cookies. Thank you Joe for lending us your range and doing the scoring

N50: https://www.national50.net/
FB N50: https://www.facebook.com/50National/
AirGunNation: https://www.airgunnation.com/forums/benchrest.558872/
Benchrest Central: https://benchrest.com/forum/forums/airgun-benchrest.19/

don cothran .457 like new.... Has airgun revisions grips and truglo Red dot sight... $800 shipped.. PayPal friends and family.. may consider trades

Anyone using the GX CS4 compressor to fill 45min tanks?
I'm filling one right now from empty with this compressor. I know it's a slow process. Been about 35 min so far and it just hit 1000. My question to guys using these is do you run them for a straight 4-5 hours or d you shut them down now and then and let them cool down a bit.
The air blowing out the fan feels fairly hot right now.

Here is a good used but not abused 98 in .177 with a Vortek PG4 HO kit installed. It’s doing just shy of 15 fpe with standard weight pellets. It does have some minor cosmetic blemishes but functionally it is perfect. $575 gets it to your door in the CONUS, paypal preferred, no trades

Selling these as a complete package- Marauder 22 cal. in a Craftmans vit stock and a Marauder 25 cal. in a Mad dog stock for $600 shipped in conus. Postal Money Order only, will ship UPS when check clears with tracking #.

Extra o-rings for both guns besides the ones in the pictures


25cal. Marauder in a Mad dog stock - 4 mags - single shot tray- degassing tool - assorted o-rings from crosman and caption o-ring - 25cal. sumo, drilled out a little oversized due to clipping. If I find the DFL 1/2x20 moderator adapter I'll send it also . Spare adjustment clip also but hard to see in the plastic bag.


22cal. marauder in craftmans vit stock-5 mags, the two with blue tape needs the internal spring adjusted up one hole, the other ones cycle good - degassing tool - printed check piece - oem shroud cap - DFL moderator adapture1/2 x 20. (Scope not included but will leave rings on) I took the fiber carbon wrap off of the air tube in which it took off some bluing on the air tube so it has been painted black fyi. This gun has NO SAFETY AGAIN NO SAFETY with this stock configuration -- see picture of action, it is on the gun but no linkage was supplied by stock producer

Want to sell a bullboss 25 cal. it has 4 mags, plus a pappy yosh mag holder, Discovery HD 4-20x50 SFIR FFP scope, fill probe with male foster fitting, gun is ready to shoot, it's a hard hitter. The stock has a little flex when using a bipod fyi using a bag is better. $ 165 shipped in conus Postal money order only, will ship when check clears with UPS tracking #. Yes I'll throw in the bipod

Sold...

AirMaks Caiman 25cal. No mags or fill probe. The safety is messed up and need to be fixed. $250 shipped with tracking, paypal Friends and family. It's need work, fires fine but safety is not working correctly and fires as you push safety in or out. Project toy

These are available for pre order now at PY Air. I really liked this gun! The new Hatsan Factor RC Sniper Long. 70+ foot pounds in the .22 I reviewed here, and they also come in .357. Airgun of the Year? I thought so. Happy shooting! -Nate

Almost new Innorel Tripod and Fanaue Adjustable saddle. (SOLD)

Innorel PW70 Mini Tripod. The tripod is adjustable from 5.5 in to 10.2 inches in height and the legs spread to a 17 inche circle at the lowest setting. Has both 3/8 and ¼ inch screws for mounting a variety of equipment.

Fanaue GS-01 Arca Swiss Rifle Saddle, T6061 Aluminum CNC machined with Class III hard annodized finish. The saddle is large enough to grip a 580cc bottle as well as most rifle stocks.

These are near new and I am asking $60 for the combination TYD. PayPal FF preferred.


Saber Tactical Monopod Bench Version with adapter for your rifle. (Sold - Awaiting funds)

• Stainless Steel Precision lead screw for smooth micro adjustments
• Other metals are aluminum 6061 T6
• Rubber bottom for extra grip
• No need to loosen knobs for adjusting
• Detach and attach mono-pod to adapter by sliding the mono-pod in.
• Strong magnets help keep it secure
• Ball joint near the base allows you to cant

Asking $130 TYD. PayPal FF preferred.

This gun shoots hades and jsb/fx 18.1gr pellets great. No leaks. Comes with DonnyFL fx mod and 1 mag. Buttstock is adjustable. 300mm barrel. Can throw in a few tins of pellets as well. $1100 shipped to the lower 48. Not interested in trades

okay, its been a while since ive been on here but im back for now. April of this year I purchased a red Talon SS in 25 caliber, and I love this thing. ive only had the gun for a short amount of time but I can safely say it has taken the number 1 spot in my collection. here's how I have mine set up, for the valve hat I am running the .166 hat, my power wheel is at 8 on the slot and 1 on the wheel, shooting the JSB Kings at 815-825 fps. I don't know exactly how many shots I get per fil but its more than enough for what im doing for sure, I can fill the gun to about 2900 PSI without valve lock and shoot down to about 1600 PSI with no noticeable change in POI. I have been using this gun for pest control mainly, including starlings, pigeons, chipmunks, red squirrel, and wood chucks. what surprised me about this gun is just how accurate it really is. is it more accurate than an FX? no probably not. however, it is more than accurate enough to take head shots on wood chucks at 45 yards. normally I would want a higher power gun for wood chucks to be on the safe side, but with this gun I am more than confident. I have taken 3 chucks with this gun so far this year and all of them were perfect shots right behind the eye and I tell you what, the gun delivers. at first I was thinking about putting an 18 inch 25 cal barrel in it and removing the SS kit to reach out to farther ranges, then I took out a pigeon at 121.3 yards...so needless to say the 12 inch barrel is staying. I could go on and on about this gun but instead, if any of you are looking into one of these or have any questions about them, just reach out or reply in here and ill do my best to help

stay safe guys

22

All sold. Thx.

$75 EACH shipped in lower 48. PayPal or MO. That’s oil on the first mag and It’s NOT scratched up. All in great condition.

I Just picked up another Lother Walther Premiun Experimental barrel for my L2 -.22 caliber 450mm.
shoot really good. In running at 960 ft./s. With a 23 grain patriot javelin. 1/4 inch groups @ 50 yards.
This is the 3rd barrel i have From them and they all shoot great.
A bit expensive, but well worth the money.

New gun with a 600mm barrel and a silencer.
JSB Exact 15,89

I am new to tuning, and I have watched a lot of YouTube videos, but I am not sure what to do.

First tests with the Chrono, and if it looks like I am far away from all the numbers, I see everyone else has.
This is how I measure the hammerspring, how do you measure so I use the same "standard"?
Help, where do I start?