Want to sell: Beautiful EDgun Lelya 2.0 .22 in Walnut. Darn near minty, clean, and no issues - scope & rings not included. Comes with 4 mags, probe, and will be shipped in a hardcase. No interest in trades. Venmo, Zelle, PayPal friends & family, USPS or Bank Money Order, Cashiers Check.

Hey, fellow Epoch enthusiasts. I’m reaching out to find out how many of you are interested in eliminating the inline bottle shut off valve in favor for an adapter much like what’s attached on the front of most FX platforms, so at any time the pressurized bottle can be removed safely without losing any of the air in the bottle. The great thing about these Skout Epoch platforms is the air bleed off knob on the side of the chassis, so the entire action can be drained down of all air once the bottle is removed.

I’ve been having back and forth emails with Marc at Huma to come up with this design, and possibly take it another step in where a first stage inline regulator can be designed for this gun much so like they did for the MK1 and MK2 Impacts, in where there are side “tongs” to hug the sides of the chassis giving the addition of a first stage reg a more aesthetic look.

For those of you not familiar with that mod, here’s the link. Probably the best mod overall that I’ve added to my pre M3 impacts, in helping its overall performance-

But that would be later down the line if Huma would consider taking that next step. For now it’s the bottle adapter I’m reaching out to all of you for mainly. Huma said if 30 or more folks would be interested in purchasing this adapter, they would move forward in its design and fabrication.
Here would be the pluses to having this adapter-

1. Pressurized bottle can safely be removed with very minimal loss of air
2. No more inline shut off valve that is prone to leaking surprisingly- not bagging on Skout for utilizing this inline valve, as it is recommended that the entire gun be drained of its air after use, but that tiny 003 o ring has twice failed on me, leaving me with all air emptied out of the bottle while shooting at home
3. It will shorten the length of the bottle to chassis connection, giving the Epoch platform an overall better look, aesthetically.

So, fellow Skout Epoch owners, if you are interested in this bottle to chassis adapter, please reply on this thread as I am forwarding this thread to Huma, to see if there is a want/need for this adapter. I’m guessing if Huma moves forward with this, they will sell both the bottle to chassis adapter along with an FX style 300 bar rated bottle valve in kit form, so two parts, maybe.

Thank you

I’ve been trying to figure out if knurling reduces or helps a slug's velocity. So far I’ve read that knurling can reduced leading and it can hold lubricants better. I haven’t found much more on the topic. I’ve seen some .45 slugs that @nielsenammo makes that are knurled and I’m wondering why just that caliber and what’s the purpose? What are the other benefits of this feature of slugs for airguns?

I'm a fortunate man to live where I do.

So here it goes - I’m selling my Edgun Leshiy2 .25 cal 250mm

Something tells me this is one of those guns I’m going to regret selling, but I’ve just got to thin the herd…

If you’re reading this, you know what this is: the ULTIMATE backpack or truck pelletgun!

I’m the original and only owner of this Leshiy2. Purchased direct from Edgun West.

I’ve put about 4-5 tins of JSB pellets through it and it has never had an issue. Simply don’t shoot it enough!

Cycles great, holds air (will shipped degassed), and remains in excellent overall condition.

This is the 1st generation of the Edgun Leshiy2 (the regulator is internally adjustable). Arguably the most durable of all 3 versions thus far. I’ve done a few minor upgrades: Carbon 300cc bottle (also purchased from Edgun West), 2 additional magazines, new Micarta grip, Huma Mod50 “Hornet” moderator.

This Leshiy2 comes with 4 magazines total.

Original parts also included (see photo 3). Original air cylinder (used for about 200 shots), original moderator, original hand grip. Also included is the original fill probe, and shorter locking pin (does not work with carbon bottle installed). Plus a few extra bits (little rubber butt grips, a magnet to remove the mag covers, a picatinny adapter, 2 spare transfer port pucks and o-rings. The original neoprene sleeve is getting a bit fuzzy, so a brand new neoprene sleeve is included. What you see in photo 5 is all that is included with this sale.

I have never changed the factory settings. Brian (at Edgun West) set it up for me with lots of power, but with the 300cc carbon tank, I can shoot all 4 mags and still have air left for more!

This Leshiy2 is used, but remains in excellent overall shape. I never aired it up over 300bar. Never used in rainy weather. Always stored in a cool dry place. Very little cosmetic wear: a few light marks here and there - see photos. About what’s expected for a used Leshiy2.

Note: There is some very minor flaking off of the finish where the mags spin against the barrel - this was common with first gen. Leshiy2s. In no way affects the cycling of the mag or shooting. See photo 4.

My only reason for selling is that I bought another Leshiy2! (Longer barrel and larger caliber).

Asking $1850 PayPal f&f shipped anywhere lower 48.
With the extra mags, extra bits and upgrades, I feel like that’s a very fair price. Of course, best offers are welcome!

Let me know if you’re interested!

I bumped into a video on the SE90 while on u-tube. I had no idea Air Arms ever made a side lever spring gun. Not a lot of info around on this rifle. It looks like a very interesting gun.
They were made in the 80's. It's a top loading side lever. Does anybody here have one?

OKC had their June Field Target match this past Saturday the 22nd. Man it was hot and humid!! But we had 16 shooters show up for it, thanks guys. We set up the course a little harder this time, not too bad though!! All shot in Hunter class to boot. The match went off really good, love it when that happens.
On the top of the podium was Mike Atwell shooting a 53! The 2nd spot up there was Thom Davies. 3rd went to, oh wait that was a shoot off. A shoot off, between buddies you say, yepper. . Between Dave Cole and Curtis Nelson. With Curtis taking the shoot off for the * 3rd place seat. And they drove together from the Tulsa area, about 1 ½ hours away. I wonder how that drive went lol!!! Oh I am sure they made it back ok with only a little discussion, haaaa. Opps I forgot, Dave drove, OH my!!

Well, here are some photos taken by Dave, Thom and me. Hope you enjoy them! We sure had a blast even in heat!!

Thank you.

…The AriHead Group…

I would like to hear from any "sportsman class" Karma Red Panda shooters who attended and shot at RMAC.

I'm sure all the Pro RP shooters have their choice of barrels to choose from directly from Karma and swap them out like candy. It's possible that pro shooters go through many different barrels until they find one they like. So their opinions might be bias.

But the sportsman class shooters are likely to shoot with an "out of the box" RP and may have a different perspective.

I'm strictly a long distance "bench rest" shooter with a goal of shooting targets at 600+ yards with the 30 or 35 cal slug models. I also have a very slight interest in 100 yard bench rest.

So what say you, sportsman guy? How did your RP perform at RMAC? Would you recommend it to your best friend or worst enemy?

If the membership can keep their comments "on topic" I would like to hear from you.

Rod in San Francisco

Price not being an issue, would you buy an electric or gasoline powered compressor, assuming of course that each is a high quality compressor (Alkin, Coltri, Bauer)? Yes, I know field use would lean to gas, fixed base toward electric - but just in general mixed use, and with possible resale in mind - which one?

As new used maybe 3 times. We prefur the True Ballistics. Works great no issues. 225.00 now 210.00 to your door. If you think you can get one new for that price then thats probably what you should do. Thanks

Would trade towards high end spring rifles
Beeman
Hw
Theoben
Bsa
Webley

Rattler 357 barely 2months old. Latest version holds air indefinitely! Cycles properly never a hiccups. I’m mainly checking interest because I do not have to sell. Like all my rifles if I don’t shoot it I sell it. This has the 700cc bottle for extra shots per fill. I’ve added a K&L butthook to keep it seated properly on your shoulder Approximately $175.00. Accu Shot precision mono pod $120.95 that also folds under to fit back in the case or to use as a bag rider. I paid over $2700.00 for this new and I’m asking $2650.00 and you pay shipping. There are no visible scratches and this rifle has only been shot maybe 50times. This add is posted for the conus USA only. Bipod ergo grip and scope are not included. No trades, ℹ absolutely will not hold it while you try to get the bank .

Hello,

I haven't posted in awhile. I am looking for a PCP to recommend to my buddy. It will be used for pesting mostly. It needs to be dependable without tinkering and of course a good shooter. Anything in the 600 dollar range fit the bill?

thanks guy

Up for sale, this pp750 with digital plenum gage, folding butt stock, huma regulator, also comes with 3 barrels. The 17 in barrel with carbon fiber sleeve shoots the 13 grain jsb knockouts well and most pellets. The 10 in barrel and 7 in barrel both shoot most pellets very well.

Asking $420 plus shipping for everything plus everything that it comes with new. Scope and moderator not included bipod and adapter are

I am new to the air game and need help putting a rig together. I have been shooting precision rifles for decades and recently decided to give a PCP a try for shooting precision target and pests around my property. Mostly groundhogs and midnight missions against raccoons in and around my chicken coop. Shots out to 150 yards. I am leaning towards a .25, but that is as far as I have gotten. I want the highest quality I can get without going past the point of diminishing returns. Buy once cry once. Best speed without it being a broomstick. Quiet is important to me. And I want the rifle to be more accurate than me on my best day.

Semi vs bolt?
Brand?
New vs Used?
Brands?

I am open to any and all suggestions. Please help me to learn this new sport! Thanks!

Wow! I haven't fired anything like it. Just squeeze, psss, ding, smooth as butter.

Sold my Dynamic so I have an extra scope
Very clean No scratch Compleat with sun shade & lens covers Plus factory Box 5-25-56
FFP Ready for a new home. Located in Den Colorado .Asking $450 Prefer PayPal F& Family Buyer pays shipping 303-246-0273

For the Notos lovers.

SOLD.



Selling my Notos .22 that is detuned for barn pesting shooting CPHP pellets @585 FPS. It shoots other pellets well too just see the target below. I installed an external plenum which doubled the shot count from 21 to 40 shots before it’s off the reg. Barrel was send to Firewalker, our resident Notos expert for polishing and a new crown. I removed the stpock OEM moderator and installed a 1/2 - 20 adapter so you can add your own device. It also comes with two Maple Products 15 round hi cap mags as the OEM mag is junk and I threw it away. The Maple’s operate flawlessly. Also included is a picatinny rail to mount a bipod to.

$350 shipped in the lower 48. PayPal is OK but add 3.5% to cover fees. I’ll also accept a postal MO too if that works better?

I have 100% positive feedback here so buy with confidence.

I have 3 nice pistols for sale -
Artemis PP700SA .22 Tuned by Brian @ Verdium Air. Huma Regulator installed. Easy load loading gate, 3-D print effective LDC & bi-pod adapter, foldable rear stock, UTG 3-12X44 Mini swat scope. Asking $425 shipped.

* SOLD BOTH* Selling 2 HW44 Pistols. One in .177 & .22 cal.,
.177 includes 2 magazines & fill probe.
.22 includes 4 magazines & fill probe.
Asking $725 shipped for each.
* NOTE- Scope and rings are not included on HW44.
No issues with any of these pistols, hold air and function as they should.
Accept PayPal friends and family or USPS m.o or personal check but must wait for bank to clear it.

Just want to get some thoughts on this match up, a FX Panthera Hunter Compact VS BRK Ghost Carbine both in 22 cal.
Lets say they would be used mainly for pellets and max distance of 100 yards (I know its 100 yards is tough but its just a reference number).

What are your thoughts on this match up?

NLA

Daystate .25 Wolverine HP R in a gorgeous Minnelli Forrest laminate stock. Condition used, but to me better than new. There may always be a cosmetic something on anything put into service. This airgun is clean as it gets.

$1500.00 shipped to your door = insured and signature required. The Scope is not included.

Tuned by Derrick Wall for Extreme Field Target - shooting JSB 33.95 gr @ 890 FPS >50 FPE

history:

Highly recommend reading this thread about this gun = Purchased new from Tenacious Airguns Fall of 2023 for $1800.00 plus adds - see this link for my acquisition: https://www.airgunnation.com/threads/25-wolverine.1300804/

I shot one EFT match with it in Orlando Florida area in November of 2023 and it has otherwise sat unused - too much airgun for my backyard.

PRS OR CARM SINGLE SHOT LOADER included
3D bottle clamp included
Donny FL Moderator with QD system included
Custom Minellli Butt / shoulder piece included - i have the original rubber shoulder butt piece if you prefer.
I have lots and lots of positive feedback so buy with confidence
Paypal FF: [email protected]
Zelle
Venmo
checks or money orders must completely clear (14 days sometimes) before i will box and ship.
Send me a text for more photos or info: 251-610-8582

If you have a super clean and very new Wolverine HP R in .177 i will consider a trade.

For an impressive tie-breaking win on the Big Bore Slug Challenge at RMAC 2024!

For his back, to back, to back, to back (4x) 100 yard BR victories. Shown here at RMAC 2024

Saw this deal and it was good enough to buy. The price for the vise alone was comparable to a couple of other vendors, but I can always use more tools. Anyone use one of these? If so how do you rate the value for the price point?

Winner of the 2024 RMAC PMC Pro. The targets were challenging, and the heat was almost unbearable, but Matt pulled it off in humble fashion.




Check out the Best of the Best PMC Compilation: