I recently ordered and received the GX CS-4-I for range trips and not to have to try to be as careful with the power supply. (Works great btw)
But as many of us have wondered if these units are the same as Omega compressors . They are. I simply asked the GX manufacturer if they were while ordering and they answered me that they were on chat. So If you're wondering if they will hold up like the Omega? As long as QC is done properly they should be just as good.

Shot 2 cards at 50y today with the grands at 930 fps. Wind was fairly light but unsettled.

First card was a 250 19x. This one's a little better. I can't really say these are noticeably better in the wind than the 25.4 monsters.

I did drop a partial tin of these on the floor and although they appeared undamaged to the eye...they could not even stay in the 6 ring. They were the ones that had previously shot well at 100y. That's something to think about.

Mike

Make me an offer. I want this stuff gone. May ship for the right price.
Brand new genuine Yong Heng
Gently used Vevor Yong Heng clone
Hill MK4 pump
Used and functional GX CS3
45 minute tank and valve
A bunch of odds and ends

This is my “custom” M16A with a 23” TJ slug barrel. Comes with 2 CARM Mags and a SST. NO MODERATOR INCLUDED! Reg is set at 115 bar shooting the 25.39 JSB at 860. Not exactly sure what modifications Veradium Air did to the gun besides valve work, custom barrel, polishing and porting. Shoots really nice now that I replaced the cheap valve retention pin. Gun was $700 straight from Veradium Air.

Edit: I had bad judgment and used the pictures from the guy I bought the gun from. I’ve updated with my own pictures.
$800 Shipped
I have a very good condition Taipan Mutant .22 for sale. Comes with 2 factory mags and 1 3D resin mag, 3D printed hammer spring adjuster and a factory mag holder. I believe it is Huma regulated due to the sticker on it. This gun shoots everything well. Has a CZ barrel. Currently tuned to shoot 15.89 JSB at 920. Lots of room up or down. I believe the reg is set at 145 bar right now. Beautiful stock. Scope not included.

Selling my Airacuda MAX .30. Used it for a couple review videos and I just have to make room for the next review gun.
send me a text if you’re interested 928-846-0437
here is one of the videos I did with it
The Scope Is Not Included

They banned me for five days. They think air rifles are fire arms.

I am wanting to get started in this pcp world and thinking I want a .25 fx maverick. Advice will be appreciated

Yesterday I Posted impact parts I was overwhelmed with over 40 response. There was a picture of the parts I thought they were pretty well self-explanatory although some didn't understand the gun was a parts gun I had a few inquiries about it that wanted to talk about it in between that and the next guy who took the deal and PayPal`d the money , the deal was over.
I'll try to post a more defined ad next time.

So now that the over the barrel airtube is becoming more and more common it's really time a Manufacturer comes out with a cowboy lever action ( how many tactical guns with bottles hanging out in all directions do we need ? )

So a nice fat bull barrel/airtube, same size airtube under it and even possibly a little extra air reservoir inside the buttstock, maybe revisit the inline magazine like the Careers use to have.

C'mon, I bet it would be a nice seller and lots of shooters will love to have one on the gun rack.
Make it with nice proportions like a slim 45-70 Henry, Don't get me wrong I love tactical guns but I also love a nice old school cowboy lever action and with the reservoir over the barrel concept I think someone could come out with a good looking model.


....love the looks of the new FX wood guns with no tube or bottle, simple and clean.

no longer available

Custom Crossman build with match grade barrel for HFT i have two of these only one is for sale.

One of a kind ? or very rare?

side lever HFT Marauder .177

pretty much a new gun

Asking $700. shipped insured

i have lots and lots of positive feedback

paypal ff = [email protected]
zelle rudy-smith-15
venmo 251-610-8582

for more info text me 251-610--8582

So I don't want to be too skeptical but I did get a chance to test the new JSB .22's and so far I wasn't overly impressed. I'll keep doing some more testing at 50yd and see what happens. Gotta keep in mind that the hype (marketing) is all about increasing sales. A lot of the redesigns .22 were falling out of favor with flyers, etc so it makes sense that the new improved versions would eventually come out. For any of you golfers out there I'm sure you've bought that latest greatest superman driver that supposed to give you another 30yd on your drive and right down the center.

Because everyone has that feature in their PCP that tells time, why not me! (It's a reconstructed thicker plenum because the original one got cracked, so can't do this in original Steyr, not to immitate unless having a skill of hard fitting and a basic knowledge of pressure per area)

The Mora is ready to fill the stores (so i have heard)

I was at IWA and had a chat with the men from RTI and once again they gave me some information that tikt another box!

Everything about the Mora oozes quality! And is totaly on another level! you if i understood correctly you adjust the speed only with the regulator!
Fully adjustable trigger also length of pull, and what i found very helpfull…. Vent holes were the O rings are situated, so when you have a Oring that failed, you don’t have toe strip the whole gun! Or douce it in dishwas liquide looking fotr bubbles! Below you see a few of the ventholes thet are also on other parts of the rifle.

The safety below is (because of the high kaliber possibillty’s ) a “hard” safety, in other words when ingaged it locks in front of the hammer, so even when you were to drop it from the empire state building that hammer stays in place



Below you can also see the tiny vent hole under the barrel in the action.

Above: The barrel can be used “freefloating” from the breech onwords, but if need be, you can mount a bushing that clamps the barrel just behind the moderater cap to fiddle with the harmonics.



Here is the adjustable regulator blok that you can turn 180 degrees is you have the need for a bigger or “thinner” bottle”

big bottle!!


Thin bottle!




Above you can see the small and wide bottle installed.

Beneath the stock there is a knob and when turned (no tools required ) out you take out (i believe you could do some adjutments) i’ll ask again what it was, distributeurs wanted to place orders so i didn’t want to stand in the way of that.

To be continued!

Ha, my daughter helped out… i’m just a hobby shooter with air for 35 jears but comuters are not my strongsuit
The vent holes!
Wait a minute…

sekhmet 28mm 1/8 bssp digital gage and charger CABLE and updater PRICE DROP
$40 SHIPPED PAYPAL F&F

View attachment GAGE.jpg

View attachment GAGE.jpg

Didn't get into the WMA till a little after 4:00, went to my spot, after 45 minutes or so finally saw two, did my best to stalk to a comfortable range, but they dissapeared.
Then I saw two more close to where I was before my stalk, so I backed out of the edge of the woods into the adjacent clearing so as to not make as much racket.
Upon re-entering the woods, I saw a suspicious lump on a limb close to where the second pair were spotted. Put the scope on the "lump" yep that's a squirrel, but just a little out of range.
Picked a path via limestone outcroppings closer to the intended target, braced my 2250 bottle build on a tree, and looked through my Bushnell AR 6X18 side focus scope for the bogie - wtf? wait, that just it's tail now - it's just moved to the other side of the branch - so I remained braced to the tree, and while I was adjusting the side focus, he moved back into view with his eyes on me, big mistake!



Ammo today was 22 caliber Predator 15.89 gr. shorts, easier to single load since the bolt on this build has an extended probe. Please forgive the wordy post for just one squirrel -

.

Hatsan Sortie .177 PCP pistol for sale "As Is for Parts Only" the gun will not hold pressure and is leaking air from the pressure gauge.
Pistol comes with sights, (1) magazine, fill probe and o-ring seal kit. $85.00 shipped within the CONUS, payment via PayPal only.
I attempted to seal pressure gauge with teflon tape but it immediately leaks from the gauge when tightened. The rest of the gun is intact and in very good condition.

I don't know if this is a good idea. If too much water gets into one of the cylinders it can lockup and cause damage.

Hello, new to the thread and forum. Have a question and I was having a difficult time finding an exact answer. Does anybody have a specific tune that they’ve done really well with, with the FX impact and a JSB exact 30 caliber pellet 600 mm barrel 44.75 grain?

Below is a tune that had been recommended, but was looking for different options as well. Thank you for your help.

1st reg 170 bar

2nd 120 bar

Macro wheel 16

Micro 3.5ish

valve 3.5 lines

Is 28 fpe enough for tough critters like porcupine? Shot a porcupine with the NSA 17.5 gr out of the brocock sniper XR last year. One shot to the head dropped it on the spot. Skinned and gutted the animal. While Chopping it up I found the slug lodged in the shoulder blade! Complete pass through on both sides of the skull. The shot was 35 yards away with 22 degrees incline.
DON'T waste porcupine meat it tastes just like rabbit but takes some time to cook.

Air Arms S510XS
Selling due to acquiring another rifle.
Functions as it should. In original box with two magazines, foster fill adapter.

Asking $950
Shipping extra from SW Ohio


No extras as shown any longer. Just stock gun. All accessories are now sold separately. The butt hook is sold.

Good shape but if you are picky buy a new one. There are a couple of marks on the wood and the muzzle has a couple spots where a moderator was previously installed.Hardly anything but I've had bad luck with people expecting used price and new condition

Factory parts with ARH moly and tar on the spring. Post in front aperture and the slot screw replaced with Allen head.
Shoots 14.3g pellets at 575 fps
It's a one hole gun at 50' .
I just find myself shooting my HW30 in .22 much more often or my RWS48 when I need power .

Moved on

I was finally able to convert my FX Impact to a true left hand gun! The magazine now inserts from the left side thereby solving cheek weld issues with the high capacity magazine.

Bullet central sells the magazine bracket for the conversion. You will also need a special left hand magazine, which Bullet Central also makes and sells, however they never made one in 0.25 caliber. After waiting a year, another AGN member suggested that I reach out to Orion the Iguna Hunter. I asked Orion if he could make one and to my delight he did!!! It’s basically the same Impact magazine he sells on his website but mirrrored for left hand insert. Mag wheel rotation is also reversed of course.

I have to give Orion a special shout-out here. Not only did he make a special part for me, he also didn't charge any extra. He is really a stand up guy and a true asset to our airgun community.

Like the title says, I’ve got a Notos with bottle conversion (done by firewalker). Comes with two Maple ,7 round mags, one 10 round mag, single shot tray and 2 stock mags. Rifle loves anything 15.89 and under.

I grabbed this for bird abatement, but grabbed two leishy classics at the same time. Scope not included. Picture below was 30 yards and 7 rounds. $450 shipped and insured , PayPal F&F.

Has anyone ever made something that combined a springer and CO2?
Like … injecting CO2 into a springer’s chamber just as the trigger is pulled?