I had not shot my .177 Akela in weeks…. was texting with a friend who also has one… motivated me to pick it up…

….but a storm was rolling in. Set up a 30 Yard Challenge card anyways… 3 shots to zero with new tin of 10.3g FX pellets…

… shot a 190 7X… no sighters - 24 straight shots from the tin using Akela magazines.

… in the rain, and the wind, in the dark… with a 14x Athlon Talos BTR FFP scope. Reticle too thick for tiny target so to “frame” the bullseye I use the space gap between the center “t” in reticle and when the crosshairs begin.

Shot the whole card in less then 10 minutes to get me and equipment out of the rain.

Think its easy? Try it - 30 Yard Challenge with an inexpensive, unregulated .177 (that you haven’t shot lately) and 14x scope in the rain, wind and in poor visibility…. in the mud, and the blood and the beer, lol.

2.57” hammer spring in the Akela of course…

I had fun after work today, lol. Love this hobby.

-Ed

Has technology done as well as this Air Rifle of 1,803 that Lewis and Clark conquered the Western USA with... without killing anyone? Just by demonstrating this amazing air rifle for the Native Americans .. 200 plus years ago??? The ultimate bluffing game for sure.

Low Psi shooting 22- 46 cal balls in less than 30 seconds at 1,000fps with about 800psi created with hand pumps.. and replaceable air tanks. Currently, a .45 cal lead ball weighs in at 137grains...

Who can do better now in the marketplace?

Wayne

There's a litter of groundhogs and a mama in my yard total of 7 groundhogs. Landlord wants them gone so figured I'd test my air rifle out.
(Jts airacuda standard .25 with h&n hornets). 10 yards I took one out with a perfect shot to the head outside of the groundhogs hole. Now I'm new to this so not gonna lie it tugged on the soul a bit, but maybe somebody could chime in on the matter idk. As soon as the shot hit he went limp for a second then started flopping like crazy so now my hearts Going a mile a minute. Now i assume i hit his brain since he was flopping so that made me feel bit better. He then stopped flopping and I took another shot to the head neck area then he was still, sould I have did a follow shot like I did? Also the mama comes out right after sniffs him a bit then grabs him with her mouth and drags him in the hole so now I can't even confirm were he (or she) was hit. After that I told the landlord I aint shooting no more groundhogs.
So yea I guess my question is was it super f'd up that I shot one of the little hogs?
And can I leave them be and will they eventually relocate themselves?

****EDIT**** the 100 FPE .30 is gone so is the bottom stock in this pictur, but the Winchester stock is still availlable and now sits on the .25.


To start off I want to say that apart for the Bullpup all stocks can be changed from gun to gun so if you prefer a gun with a certain stock I can swap them.

Also I have 2 extra stocks that again can go on any gun or even be brough as spares to change them over.





Starting off with the Rainstorm that is more OEM of the bunch, this .25 has a blond stock and the barrel was polished by Knifemaker that also did a great transfer port enlargement,

the gun shoots right at 55 FPE and loves the Baracuda/Kodiak and even more the JSB MK II

500 Bucks plus shipping




Next is the Bullpup, tuned by Will Piatt it's a beast .25 at 65 FPE with the JSB MK II

500 bucks plus shipping






The next .25 also has been tuned by Will Piatt very recently for a solid 60 FPE with the JSB MK II

sits in a 10/22 tactical folding stock

600 plus shipping





The 1st .30 has a sweet 85 FPE tune and sits in a beautiful Thumbhole stock

600 bucks plus shipping






Kept my favorite for last,


.30 Mini Carbine in a custom folding stock, tuned by Will Piatt at 70 FPE and loves all pellets the Baracuda best
this gun comes witha Buck Rail LDC that I opened up for the .30 cal

700 bucks plus shipping






So if you buy one gun you can have a **FREE** JTS Airacuda .25 of your choice,......just pay shipping.

I have a Huggett Magna fitted to a 40 ft-lb .22 pcp and I'm not at all impressed with the sound moderation.

Maybe it's as good as it gets. But, on the off chance, any recommendations for an alternative, quieter .22 mod at 40 ft-lb than a Huggett Magna ?

I always wanted a HW98. A friend here sent me one in 20 cal to tune and I immediately loved it. He waited 14 months for it so when I saw a post someone was considering selling one I offered him a fair price for it.

The gentleman was great and pointed out even the most minute defects. He packaged it up beautifully and shipped it within a couple days of getting the check.

It's a 2009 20 caliber HW98. I'm very happy to finally own one.

I have an Element Titan 5-25x56 FFP (EHR-1C MOA)) for sale.

It is like new, with all caps, hood, etc included.

Element Titan 5-25x56 FFP // $475
(Shown with FX No Limit Scope Mounts / Picatinny - 34mm)
I'll throw in the mounts if you want them for $650 $475 with shipping included to CONUS.

Payment is accepted via Paypal G&S.

Have a modified hw 110 with laminate thumbhole stock. The modification is a titanium air tube which is clearly longer than the factory tube. also probably 50-60cc more volume. You can see the difference in picture. this resulted in removal of weihrauch moderator, I replaced it with a donnyfl tanto. The stock looks great overall, there are 2 blemishes on bottom by the grip. the air tube has some blemish by fill port, but it's not bad. It's a weihrauch, so the magazine loading is a touch fiddly, takes a little getting used to then it works nicely. Package comes with fill probe and 4 mags in a very nice Kube case. The original air tube is also included. I will ship it in an extra FX hard case I have for $675 Paypal F&F or add fees. $650 shipped if you don't want the case. Conus only, thank you.

AGNers!
For sale, some used, some unused yet sitting around:
All prices include shipping within the CONUS only please.
SOLD*****3 - FX Stainless Steel Fill Port Connectors (NEW) $15 Each
SOLD*****2 - Daystate Fill Port Connectors $15 Each
1 - Crown, Brass Standard Barrel/Liner Port that has been opened up slightly. $15
1 - Daystate Pressure Gage (Fits DW for sure NEW) $40
SOLD*****1 - HUMA Pressure Gage (28mm) for Impact or similar $30
SOLD*****2 - Impact Stock Bolt Handle $15 Each
SOLD*****1 - Impact Larger Silver Bolt Handle $20
The Barrel Stabilizer has been sold locally.
PayPal is the payment method preferred, but will take Postal Money Orders (only) as well.
Questions, just ask!
Thanks
Mike

Heard some noise coming from the backyard so set up a camera to see what was goin on. Found this guy out there having some fun
.

Fredrick had advised me that Andreas from FX will look into the matter.

I wrote to FX addressing Andreas but he might be busy and couldn't reply.

Out of frustration of FX users in my country I had posted as they blame me if they buy FX on my recommendation.

Fredrick didn't like my earlier post as he had advised Andreas to help me on the other hand I couldn't come in contact with Andreas.

That might caused misunderstanding and I took it as FX is no more standing with its products. Looks like its not the case.

Any ill feeling is regretted.

Bhaur

Looking for one. Let me know what you have.

Thanks for looking.

Andy.

So I am currently putting together Oring kits to have on hand for my Evol Collection, with that said, I am a dope and am having a hard time making sure I am ordering the right ones.

Slayer said you can use the middle numbers C-025-122-21(highlighted and underlined) in his part numbers to source the orings , that particular one is Viton 90 Durometer, when I search on places like oringsandmore , results come up but multiples do and I am having a hard time distinguishing, orings are not something ive ever had to source except via manufacture part number and I am probably way over thinking this.

I recently aquired this to try it out. While it does really well in the accuracy and power department, it doesn’t fit me well due to me being a larger guy.

Lelya 2.0 22 cal shooting 14.3 crosman pellets at 905fps. I turned it down from when I received it shooting 18gn jsb at 905fps. Quick turn of the hammer adjuster and it was shooting where I wanted. Its spreads are also very close for just adjusting hammer spring and not regulator.

I replaced the front edmu with an analog gauge I had lying around. The edmu wouldn’t boot up. I will include it with the rifle.

1 mag included.
Asking $1050 shipped conus.

Scope and rings not included.

For more pics and questions, don’t hesitate to pm me. I have perfect sellers feedback. Feel free to check it out.

Thanks,

Andy.

Hello everyone, I have a friend who just recently purchased a Ruger Air Magnum in .22 and he needs a scope badly, as his eyes aren't as young as they used to be. Any ideas? recommendations? or insight? Thank you, god bless!

I'd like to trade into a nice condition Weihrauch (or Beeman) HW77K carbine with no problems or issues. Unmodified or modified considered.

I have several nice PCP and Co2 air rifles and pistols for horse-trading; as well as a few custom longbows and recurves, and some very unique, one-of-a-kind bicycles.

Initial contact can be by personal message, email, or phone text; but I'd expect phone conversations would make more sense at some point.

What ya' got?

Many Thanks,
Ron Robinson
manicompressive at yahoo dot com
254-253-1239 (noon till midnight, CST)

I have been planning on doing this forever, and finally got a chance to do so. Here is a video of shooting glow sticks at night...and the resulting "fall out", or "dribble out".

Here is a link to the video:

It took me a few shots to get my POI just right, so I shot a few of them twice to make sure that I broke up all of the insides sufficiently.

I picked up my .177 hw80 in 1983 while traveling Europe in Amsterdam and brought it back to San Diego. About 7 years ago, I installed a Vortex piston/spring kit and in doing so, the saftey never worked again not realizing the saftey spring got lost. Anyway, this resulted in a bear trap which split the stock along the forearm, one of the forearm mount welds, bent the barrel, stripped the stock and trigger guard screws. I glued the stock with wood glue, had the forearm mounting tabs rewelded and some basic barrel straightning. Got overwhelmed with the other repairs and shipped it off to Steve at Pamona air guns. He found out today that the bent cocking lever and shoe will need to be replaced in order to shoot. Right now I'm sitting at about $250 plus shipping to repair if nothing else gets discovered moving forward. Steve thought there could be other problems pop up if we moved forward. Feel like I'm in a tough place. originally we were hoping for around $100 in repairs. Now I've realistically got to be wiling to put out $350 with shipping without guarantees it won't go higher. If I quit now, haven't spent much other than $37 in shipping to get it there. What do you guys think?

.25 caliber 26 grain JSB and FX heavies.
Hit me up. WTT OR WTS.

EDIT- SOLD
WTS for a fellow AGN member RANGUR1. He sent me the scope for possible purchase but I changed my mind and told him I’d run the ad for him, so reach out to RANGUR1 if interested in purchasing-
Here’s the specs on the scope:
Here’s the reticle type, FFP-

And here are pics I took today. It looks brand new:

It does not have the factory box, but I’ll ship it 100% protected/padded, etc. what you see in the pics is what you get, scope and mounts. Rangur1 will send you the instructions that came with it.
Asking price for Scope with 34mm Element picatinny rings is $525 shipped. If you want just the scope, it’s $460 shipped and ring set is $65 shipped. Paypal and if you choose G&S you cover the fees.
Yeah, so please contact Rangur1(Marc) for purchase, and he’ll be telling me who to ship it to.

Thanks for looking

Straightshooters data sheets show Rws superdomes .22 14.50 shot out of beeman r9 at 685 fps only have 5 fpe at 50 yards ? I would in the least expect it to be 9 or even 8 ? Can anyone confirm?

Good evening guys, I'm fairly new to PCP guns and this is my first post on this forums.
I live in US, but found a good deal on used FX impact M3 in Canada few months ago. I bought that gun before new year but never had a chance to go out and shoot it until this past weekend. To my surprise maximum speed of 22 cal 18.1gr JSB pellets was only around 500 FPS give or take. I contacted the seller and apparently this is Canadian version of FX impact M3 limited to 495 FPS. It was totally my mistake not paying attention to description before buying.
So the question is what is the difference between Canadian version (495FPS) and US regular full speed version? Is it only in settings or do I need to replace some parts? The current settings on the rifle is 150bar first reg, 75 second, valve adjustment is on line 3, macro power wheel on 16, and micro fine adjustment is on 4.

I had a Daisy 717 sent back to the factory for a rear sight replcemt and piston repair. It was not holding air. The gun had been unused for many years. It was a training tool I had when I was a competitive pistol shooter. I recently got involved in airguns and took it out of storage to tinker with. I mounted a dot sight and shot it at 10 yards along with my air rifles. I previously only shot indoors at approximately 5 yards(15 feet). No issues experienced.

I got on target surprisingly quickly and groups were centered up. I just noticed the impacts on paper were not round as compared to the hits from the rifles. I then discovered the pellets were keyholing. I shot a group on a fresh portion of the backstop and it was obvious.

Question: gun seems to function as it should. I added a few more drops of ND30 oil on the seals just to make sure the piston is functioning. I was unable to see and damage to the bore. I tried diffepellets ranging from 6.9 gr to 8.44. All diabolo WC or dome pellets. All will keyhole. Walking to to 10 feet, the keyhole effect lessens… but sttill there.

Send back to Daisy? Any gunsmithing local to Tacoma WA? It was originally tuned by Roddy T of Eugene OR.

I have a Like New Hawke Sidewinder 4-16x50 FFP Scope up for grabs

This is a Pull Off from my FWB 800 FT (sold the gun)

Not a mark on the scope, Crystal Clear Glass, Huge Field of View

This is the Hawke 17451 4-16x50 MOA Version

Comes with Side Focus Wheel, Sunshade, Throw Lever, Lense Covers, Tools and hardware from factory, , Manual, and Cleaning Cloth

Asking $ 625.00, or best offer, shipped No additional Fee's for any Payment Method Below

(Street Price for this scope is $889.99 and higher, Plus Tax)

Payment Options
1) Credit or Debit Card Through Square, I will send you an Invoice through Square and you pay by card
2) Paypal Goods and Services ( Direct pay or i can send you an invoice through paypal)

Reason for Invoicing payment types - cover both seller and buyer with no shenanigans.

Reason for selling Scope - Sold the gun it was mounted on.

I do NOT sell junk and my feedback reflects as such, so buy with confidence.

Sale to buyers will be by Timestamp.

Holler with any, and all questions

Hello everyone,
Does anyone have the measurements of a 0.22 217 slug mold or a slug I'm new to this, I want to make a slug,
Thank you, Have a nice day