A Snowpeak M60B was my first airgun, the more powerful MAX1 has been a teaser for many for a while now and the picture of the shot show the first time i've seen it spotted 'in the wild'. But what about those new AP models? Does anybody know a bit more about them?

14" barrel NP-03 breech and cut down the factory stock. Dual front bottles and a rear. Will end up with probably all three bottles being 300-350cc Carbon Fiber to keep it light and 1000cc is still plenty of air. This is in .177 slinging slugs right at 950fps. Just a mock up still a little stock work to finish.

Niksan Elf-S Bullpup .22, includes 4 magazines, factory hard case, probe, tools, O-ring, forearm grip with push button bipod deployment and manual all like new condition, less than 100 shots through it. The original owner won it NEW at an airgun event and fired one magazine to verify function, I fired 4 magazines through it with 4 different pellets. I decided to stick with my Beeman 1358 bullpup. See review link in last photo. -- $285.00 Shipped -- PayPal Friends & Family, (add $15.00 to cover fees if PayPal as purchase), or USPS Money Order. Trades or partial trades possible *** send a picture of what you have to trade *** I do not want breakbarrels.

I was doing some rats shooting this evening and I managed to tag one. Probably 15 minutes later I scanned the area for more rats and the dead rat had disappeared. My initial thought was the barn cat or owl had taken it so I didn't pay much attention to it. Another 15 or 20 minutes passed, I scanned the area again but this time I was using my handheld night vision unit instead as it was much easy to just scan around for targets.

Well, a coyote appeared in my scope view and I almost sh!t myself as I didn't expect to see one. I tried to switch to my gun but my movement had scared it away. The coyote was only 30 yards away. Yup, expect the unexpected next time out. What a missed opportunity.

Ok guys I made my mind up im ordering a Impact m4 600 mm in .30 cal what are some good pellets to start out with. Thanks. I have never owned a .30 cal pcp alot of .25 and .22 but never a fx or .30 can't wate lol

Have several Optics for Sale
WestHunter 6-24X50 FFP No Box $125 Shipped

Barska 1X40 Ion Reflex Sight Red Multi Reticle $85 Shipped
Sight Mark Ultra Shot R-Spec $95 Shipped

All used all function as they should
Postal MO

This looks interesting...

Hello, I have 2 M3 Impacts and have decided to put one up for sale. This is a .25 caliber with 600mm barrel. It has the Airmarksman backbone 30MOA rail. Tungsten Hammer Weight and power springs installed. It has the K&L extended Picatinny Hand guard. Comes with 2 .25 caliber mags, bipod, and Donnyfl FX moderator. Just for the purpose of the sale I have put a brand new Westhunter 6-24X50mm Illuminated FFP scope on. It's brand new, you'll need to sight it in. I had it tuned to 22 cal slugs so you will probably want to set it to your preferences. No issues with the rifle. I love it but can't shoot 2 at the same time and need to let it go. Hardcase included. Asking $1,700 with the scope and $1,550 without the scope. Feel free to reach out by call or text to Brett Williams - EliteAirCustoms (870) 450-8479.......PayPal payments only. Goods and services add 5%. Shipping is included in the price. Thanks for looking

posted this in the wrong section earlier

i made an order for ammo earlier this week from AoA bit to my surprise, my bank account shows the transaction but i don’t have a the package nor a confirmation email.
can anyone here help

Want to sell fx 700 drs synthetic 22 cal one small mag and 2 qd fox 3d printed mags ,angle manometer 650.00 shipped just put in a new valve and seals and didn't touch the reg it wasn't leaking its set 145 bar
Paypal fandf or pay 3 percent fee
Thanks

Latest addition has me thinking maybe I'll sell my drs just picked up the delta wolf from a friend is there a way to tell if it has the ultra valve or whatever the latest and greatest valve is it's probably 1 1/2 years old some where in there and a 25 cal

Selling my GX CS-4 compressor. Ask anyone - this is perhaps the finest small, portable compressor on the market. This one works flawlessly and includes the original box, manual and parts kit. I've also added a temperature gauge and an hour meter which currently shows 58.6 hours. Always used and stored indoors. Grease pot is full of brand new grease. Only selling it because I broke down and bought myself a Coltri MCH6 ICON compressor as a Christmas present to myself! Currently selling on Amazon for $589 - $70 "Coupon" = $519 with free Prime shipping - but of course they do charge sales tax - so a new one would probably cost north of $550. I'm asking $375 shipped to your door. No lowball offers please. CONUS only. Prefer PayPal F&F or you pay any extra fees. Will consider other legitimate forms of payment.
See it here including photos and specifications:
https://www.amazon.com/GX-Portable-...&qid=1737759093&sprefix=gx+cs4,aps,124&sr=8-1

After a few hours use my M3 .22 cal developed wild velocity inconsistency and after hours of searching forums for advice found the problem to be what I believe to be referred to as the C-1 Top Hat, it was freely turning on the valve rod which it's NOT supposed to do being set from the factory. This changes the proportional value between the valve spring adjustment and hammer spring resulting in severe tune inconsistency. HAS ANYONE had to deal with this problem, is it common on the Impact design? Took multiple attempts using calipers and red loctite to get it reliably set at 6mm.

I have a inline moisture filter for my pump. It currently has the tubular cotton filters in it. Can I just remove them and pour in some of the replacement moisture media? I'm guessing I would need to to leave one of the tubular ones in at the inlet and one at the outlet side to keep the beads in place?

Up for sale I have a hw35e I received and in shipping the stock got cracked . I told the owner I will try selling it for him with the cracked stock . I have no control over price so he wants $270 plus shipping . I will post pics tonight and if no interest I will just mail it back to original owner Monday. My hopes are that someone has the know how to repair stock or has a replacement stock. I would take a trade for a nice scope also.

I've been shooting squirrels a lot here lately. I have a BRK Sahara XR .22 and it shoots a lot of different pellets really well, but has a preference for AEA 18.3s and JTS 18.1s. Getting around 840 fps. The problem is the pass through on squirrels. It shoots 25.39 and 28.55s pretty well, but decided to experiment with the 33.96s just to see. All testing is at 30 yards.



The groups on the far left and bottom right corners are the 33.96s. The ones on the kings face are the JSB 20gr lights. I'm curious if there's anything I could do besides messing with the tune to tighten the 34 gr up. Weight sort, clean barrel, hold differently? Velocity is what I expected with these and they should dump a lot of energy. I just don't want to tweak the tune just for these pellets to perform when it shoots well with so many other pellets.

The black mark on the barrel liner end, does anyone know at what orientation on a clock face it should be set from the factory when reassembling the liner? I've indexed all my barrels and found there is certainly something substantial to the way its set and tensioned by the barrel nut. My question is each barrel had a black index mark but in a different position.

I’ve been trying to find this particular model to no avail. Any leads? So dealers can’t just special order one for a customer? or even attempt an order direct from Kalibrgun?

This is a full review of the compact AV Avenge-X Tactical Carbine. This shorty offers the same great adjustability of the Avenge-X platform in a nice short package. Here is a full review and a quick tuning guide. Thanks for watching! -Nate

Considering next gun which of course I don’t need. Even today another is arriving, a kratos refurb from Airgun Revision. Still sorting out the zelos, revere, raw 1000, akela ( Airguns revision) , and Reximex pistol.

However the praise on this forum for the Taipan just MAKES me want one. But the very similar Uragan 2 ( would wait for 3) to me is much better looking and that does matter to me. The Uragan is also hundreds $ more. Both would be with 700 mm barrels.

I also realize somebody may post thoughts on a totally different gun or may see a review on u tube and turn my head in that direction. That wouldn’t be a bad thing either. I’ll admit it I want to desire these guns while I’m into this hobby.
thanks,
Mike

I recently purchased a new magazine for my Umarex Bullshark. The stock mags are ok and the Carm one a step better but this new one is better yet. BIG AIR PRECISION is the name of the company where I purchased them. They have a special still going buy 3 get one free. I bought three for my Bullshark and one for my Origin/Avenger. All the mags hold twelve pellets instead of 9 or 10. Easy to load and the Origin/Avenger one snaps into place. I sure think these are the best mags out there for my two guns. He makes them for other models also.

Found a 30 cubic ft tank with scubapro din Valve. Looks to be like new. Needs 5 year re certify $150 asking.

What would I need add to this to be able to fill my guns?

I have a small shoebox compressor to use at the house and would rather not try to take to the range.

I just got a 177 R8 and I'm trying to find out what the normal (actual) velocity people get from them.

Thanks
Ron