Hey All,

Have owned this for a bit and just not a big .25 shooter.

.25 HP Redwolf with heliboard installed (original board included). Beautiful walnut stock, battery, charger, one magazine and single shot tray. PRS butt stock with bag rider is available or can be removed. Original buttstock will come with rifle either way.

Shoots the 33.95 MK2 amazingly accurate and as a bonus shoots the MK2 33.95 JSB Knockouts slugs just as accurately! Have not tried any other ammo.

Moderator, scope, rings, Atlas bipod not included but can be negotiated if desired.

Open to trades for other high end PCPs, prefer .22 or .30.

Will sell out right if desired.

Hi all,

I was always a springer guy, but I was just about to pick up an Airforce Talon PCP and an Air Venturi RovAir 4500 compressor from Pyramid air and I noticed that the 10 for 10 service and the PCP 24 Hour Leak test were no longer offered as services. Have they been cancelled? I sent a message to PA but have not heard back.

I like PA, but I also saw that Airforce sells direct to customers, so I could get it strait from them. Do you think there would be any advantage getting it strait from the manufacturer? I will still get the Compressor from PA.

I was just curious on your thoughts. Maybe also any thoughts on the Talon SS as a first PCP? I like the single shot ability, I would probably single load even if there were a magazine available.

Thanks,
Jim

Hi. I wanted to post a brief introduction. I didn’t see a dedicated “new member intro” section and thought that the general discussion area would do nicely, thank you.

I’m a Texas native, living in exile in Georgia. It isn’t that bad, but sounds sort dramatic (and it is a tribute of sorts to my dad). I live in South West GA, maybe 90 mins from ATL.

I think the airgun bug bit me around 2008’ish (maybe a couple of years earlier, but I can find some posts and emails to safely say 2008). I was a longtime member of the old Straight Shooters forum (I see they are no longer around), probably another site or two, and I wrote a fair bit on my own website as well. If you remember other boards and sites - jcalvert (that is probably me) or Calvertgames (for sure that is me).

I have been in and out of the hobby for a while. Life has a way of throwing curve balls, but I digress. I would hazard a guess that I more or less stopped posting to various boards and whatnot around 2018; although my love for the hobby and has never really died. And here I am again …

My inventory, all purchased from (the old) Straight Shooters:

-Beeman R1 .20 Carbine
-Beeman R1 .22
-Beeman R7 .177
-Benjamin Marauder .22

The R1 .22 was my first purchase, followed by the R7 and then the Carbine, which is probably my favorite airgun. I plunged into the PCP world with the Marauder, which is a brilliant entry into PCPs.

All this is to say that I was looking to rekindle the fire and find a likeminded community. I plink, I hunt (backyard, vermin style) and just enjoy shooting my airguns for the fun of it.

EdGun Leshiy 2 Honey Badger .30 cal *New*
450 mm long barrel
Carbon tank
Huma moderator + extenions
Eazy fill port + bottle plug (as pictured)
All original accessories
Airgun is new, never fired.
Small scracth on moderator only. Gun is flawless. Located in Charlotte, NC USA

$2200 + shipping. PayPal / Zelle.

Ships within 24 hours.

Please ask any questions!

Hi Guys

another dumb question from a newbie- my fx dreamline will get a 700cc carbon bottle which i fill 250bar, no more. If i get lets say a 1000cc carbon tank to feed my smaller 700cc bottle off of it- how many times can i fill until the 1000cc tank has to little pressure to fill the 700cc bottle again...

i understand it like this- i have the reg set at 150bar and i fill the 700cc bottle only 250bar so i am only using 100bar and i bounce off the reg and need to refill the gun again..

but how does that correlate to my 1000cc tank which is filled at 300bar?

am i taking every time 100bar from the 1000cc tank? but i am taking cc from the tank, not bars and the tank is filled with 300bar and not with 250bar...

i don't get it..

the 700cc bottle has always still 150bar when i refill it so those 150bars inside are resisting the compressed air coming from the 1000cc tank- so where is the limit, when will the 1000cc tank be unable to fill up the 700cc bottle with another 100bars... this is too much for me..

how to calculate that air usage?

Rifle is bran new unused. Custom Cerakoted by Barra airguns as a special edition. 22 caliber

New Barra 3600psi hand pump
2 tins of Barra Magnum pellets 25.3gn

450.00 shipped or 400.00 and you cover the actual cost of shipping

Would be interested in trades for higher end springer Beeman R9

View attachment 523478

View attachment 523479

Notos is 2 months old. Worked great and shot many small game and plinking. But decided to mod it with bottle conversion with canada regulator and big bottle, 500 mm barrel and liner kit and some extras. I was getting 740fps with 3k psi charge. Now after all mods I'm getting 450 fps with 3.5k psi charge. What happened??

Whacky to say the least
This made from a previously cut down OEM G2 air tube, re-threaded with an In-line bottle adapter fitted which then has a Ninja 13ci Bottle & regulator attached.
Inside the air tube a vintage small seat & outlet WAR valve with a custom "Cobra" air spring & PEEK poppet. Out back a MDS lightweight hammer and internal SSG hammer free flight devise.
Up top the receiver has a thin poly spacer to raise height slightly so a retrofit 15mm .177 cal barrel was made to fit receiver, then diameter reduced where it passes over bottle.
Cocking bolt a modified piece utilizing a custom seating probe tip. Stock is a cut up Black poly shaped and re-profiled to fit bottle clearance as well be "Pistol" ambidextrous.
Fitted with a HAWKE AO parallax mil-dot optic using Sports Match rings.
* All said and done it is fully AAFTA Pistol class legal as configured.

OAL just shy of 24"
Barrel just shy of 15"
Belly forward of trigger guard just shy of 3"
Sub 12 FPE .. tho as set up will do @ 15 fpe with free flight on hammer reduced

Shot cycle a very crisp "Snap" not being really that loud being non LDC fitted.
Accuracy is well within most FT Pistoleros skill set for PFT competition I'm figuring

Anywho, just a share as I do a bit more fit & finish work in coming weeks and some clear weather to fine tune it in.
* Ultimately this Whacky little pistol is going to get sold at some point, as that was the intent having built it from stashed away extra parts & pieces from years of building other Marauder customs.


Scott

So happy holidays from my family to yours.
So I just received my m4 last week and have just shot it a few times and really haven't had the chance to test out my dope chart that I did on element optics ballistic app. So I got to my in-laws today in Arkansas and man I love family but I need to get of house with some trigger time!! So at 133 yards I seen two squirrel doing there tree dance! So I sat up off the of a tree using my arm as a brace and sent a howler 12gr slug and hit on second shot! I couldn't tell the wind from my position but man a head shot ill take it!!

Selling my my Fathers collection of BR shooting pellets. Have over 700 plus tins of pellets, 98% unopened. 80% are .177 cal with rest being .20, .22 .25 .30 .35 up to .50 cal

Basically selling the lot. not ready to seperate at the moment. I can deliever them personally if in Cali or Surrounding states. ( enjoy road trips )

I will soon be listing everything else after holidays now that im no longer tied down. I think 8k is a fair price but willing to listen to offers.

Just looking to see what's out there before buying new.

Shooting JSB KO Mk II slugs out of a .22 RAW at 825fps produces fairly good groups out to 50 yards. The groups average no larger than 1/4" at 25yds and 5/8" at 50yds. Since this is a fairly low speed for slugs, is there good reason to believe that the slugs will destabilize, and therefore accuracy decrease, as I approach 100yds? Or would they remain stable and produce groups roughly twice the size of what I get at 50yds? Or is there no way to really tell unless I actually shoot at 100yds? The reason I ask is because I don't really have a way to shoot up to 100yds anywhere near me.

Thanks.

Looking to sell this beauty for $520 shipped with Huma 30 (Kevlar) compact mod, 3 Tango Sierra mags and 1 OEM mag and some ammo. The gun does have a 3d printed baffle from Tango sierra, but I'll package the OG baffles along with it.

If you want the scope just tack on an extra $100 the scope itself ran me $133 but goes for $180 and it's only a few weeks old if that. Vector Veyron 2-8x32 SFP IR

Gets sixty shots per fill from a 250b fill down to 130b. LOVES jsb 10gr v3 slugs at 900fps, also really likes griffin 14gr slugs. Haven't tried any pellets in this really.

OAL is about 33" with the moderator, the gun shoots quietly but it has a slight ping to it, not bad though.

It's been taking a back seat to my new to me U2 compact.

$520 shipped no scope

$620 shipped w/scope

I have a real urge to get a Prophet Performance. I have an Impact X Mk2 and love it, so i'm ok with bullpups, so what are the pros & cons compred to the Impact? I,so far, only shoot pellets, so i dont want a slug barrel on a Prophet. What are the pros & cons of PP1 vs PP2 vs PP3 etc?

one of my favorite Christmas movies

i wonder how many air gunners Ralphie and the movie spawned

I really tried to do my own work on this one. I have searched this forum and YouTube for information and have come up short. My intended use is daytime fun ( I can't really justify it but I want to play with one) and night time pestling. Budget is under a grand. It looks like there are a few trusted brands in that price range (Pard, ATN, Arken) and most have a LRF option. FWIW I have a hand held TideWe laser range finder. So what would a built in range finder do for me?

Hello, just here to learn and see. Interested in getting to the PCP items, have an idea of where I would like to pursue with big bore items, understanding the compressor route of filling. Have seen a lot of good info and items.

Hi guys

i will start by saying that i hate the fact that i have to look for this ugly barrel band on such a good, expensive airgun- this seems to be a weak point to its design but hey, it is what it is..

i will swap my cylinder for a 700cc carbon bottle (2024 dreamline lite with .30cal 600mm barrel)

i am looking for a cool looking barrel band that has a rail on the bottom for the bipod

i can not find anything except those ugly looking tinny bands that fit the barrel/cylinder.. but not much for the carbon bottles

so maybe some of you got already some bands for your carbon bottles and care to share a photo and a link to the product

i know one can print 3d anything but i cant.

this is the bottle i will get- length 410mm, diameter 60mm..

Using the bottom and upper rubber plug locations, has anyone come up with an adjustable butt pad that would also allow the gauge to be seen?

I prefer to keep the scope as close to the barrel as possible, but the stock rides high in the shoulder. I can't help but think that someone has already created something for this slight inconvenience.

Hope everyone had a Merry Christmas too. Cheers, Norm

These were done with a 25 cal. Umarex Zelos with over 200 pellets through the barrel, the regulator set to 2000psi and the hammer spring flush. I used a Nate Chrony that is reportedly calibrated at the factory but I do not have another chronograph to use for comparison. In all of these shots the tank pressure was well above the regulator pressure. For each pellet there are two strings of five shots. Perhaps it is obvious to you guys but it took me a minute to figure out this screen, The data you are looking for is below the line of buttons that say "Save 1, Save 2..." The columns from left to right are 1st string, 2nd string, 1st string FPE and 2nd String FPE. The rows from top to bottom are low, high, average, spread and standard deviation, then the rows below the dash are the individual shots.

JSB Exact King 25.39



FX 25.4



JSB Match Hades 26.54


JSB Match 33.95

I recently got an Umarex Notos, which I am thoroughly enjoying. I very quickly realized however, for my plinking habits ~25 shots per fill is just not enough. I realized I was spoiled having started with an Avenger and getting 120 shots per fill. I looked at various cylinders, and wanted to start small (cost, as well as my cheap pump probably wouldn't handle a large cylinder). I wanted to get a feel for what a very small portable cylinder would get me. I do plan to get a YH in the future, and will likely get a larger cylinder then.

I have seen Stubber's calculator, but it is focused on larger tanks and I wanted to see not just how many complete fills, but also what incomplete fill pressures would be as the cylinder dropped below the max pressure of the airgun. That way I could get an idea of what as small (0.5L) cylinder would get me. I created a simple spreadsheet to estimate the fills and pressures (hopefully its accurate), and figured I would post it in case it was useful to anyone else.

On another note, Christmas brought me the 0.5L cylinder and valve I decided on after playing with the numbers. The estimation seemed to work, and I got three full refills on my Notos stating from a bit below 300bar in the 0.5L cylinder and shooting 3 magazines between fills (21 shots - probably still a little over the reg pressure). That is about what the spreadsheet predicted. I was also able to fill the 0.5L cylinder from empty without issue I stopping whenever the compressor temp got to 40C and resting for 15-20 min - complete fill needed 12min first run, 8 min second and third runs, and a 4 minute run to final pressure just below 300 bar. I stayed a little low because the guages on the compressor and the cylinder valve disagreed a bit, so I stayed on the safe side.



View attachment PCP refill by cylinder.xlsx

Merry Christmas All!

Time to move this one along, one of the absolute most accurate Red Wolfs I have owned in .22

Beautiful blue laminate stock, upgraded 580cc bottle, one magazine and single shot tray as well as extended cocking handle, original included as well, battery, charger.

Heliboard installed (allowing 12 power settings), original board included.

970 FPS on power level 7 with the Redesigns.

Asking 1900 and we can split the shipping or open to trades for other PCP airguns.

Moderator not included.

Gun only for sale with a fill probe. No leaks. Has a Huma regulator set at 110 bar shooting Hades at 700 FPS. Has some wear marks. I’ll post pics soon if anyone is interested. Asking $900 shipped PayPal f&f only. Has a Wika gauge and a Carm grip extender. Im the original owner.

$50 shipped PayPal ff or add the fees.. thanks

Hello everyone and Merry Christmas!

I haven’t logged in here for about two years. I’ve been through two floods from hurricanes since 2022 and my Airgun stuff is all in storage. My house should be finished with rehab in the next few months, so I figured I can start looking at Airgun stuff again! It’s torture to come on the forum with no possibility of participating for me.

Hope you all have a great New Year, I’m looking forward to it!