Picked this up pretty much as soon as they started shipping as a part of my quest to try as many of the semi-auto airguns on the market as possible.

Essentially like new. Has a couple hundred pellets through it. Comes in original hard case with original stuff.

Looking to get $1250 shipped. REDUCED to $1100 Reduced to $1050.

I have some FX Impact magazine speed loader sets available for sale. Each set comes with a shaker/sorter, 5 speed loaders, and a stackable spindle with locking nut for storage. The spindle stacks into the shaker/sorter.

These are for the FX Impact's factory Side-Shot style magazines with quantities as follows: .17 cal @ 34 shot, .22 cal @ 28 shot, .25 cal @ 25 shot and .30 cal @ 23 shot. (NOTE: These have not been tested with the new FX Impact M4 magazines.)

Sets are color-coded to specific calibers for easy recognition.

A video demonstrating their use can be seen here: Impact Speed Loader Demo

These were designed for FX/JSB Diabolo pellets. Others may work. but I haven't tested them.

Everything I have available is in the photo. They will be sold on a first-come, first-sold basis. I will update the following availability as/if they sell:

.17 cal set (orange): SOLD
.22 cal set #1 (green): SOLD
.22 cal set #2 (green): SOLD
.25 cal set (blue): SOLD
.30 cal set (red): SOLD

Price for one set is $57 shipped. Price for two or more sets is $50 each set shipped.

Shipping INCONUS only. Payment via PayPal Friends & Family. PM me if interested.

Image here.

I'm curious to know adjustability of the power range for the FAC version of the new Alpha Wolf Smart. The specs on Daystate's web sited state the power is adjustable from 80-100% in 5% increments. This seems like pretty narrow range of adjustment, while the Alpha Wolf with builting chronograph appears to have a much greater range.

For example, for 17" barrel in 0.177 100% corresponds to 20 ft/lbs, and 80% to 16 ft'lb, preventing use for WFTF with a 12 ft'lbs limit.
For 0.22 with a 17" barrel the specs are 45 ft/lbs at 100% and 36 ft'lbs at 80% , with 20 ft'lbs required for AAFTA FT not availaible.

Does anyone have hands on experience with the Alpha Wolf Smart?

Thanks.

Like the title states I have a like new Fx Panthera 500mm .25 setup for sale! I can ship all of this but there will be a cost for shipping. Pickup is preferred and can add in a like new Yong Heng compressor for anyone who picks up! Will not be shipping the compressor! It’s more of a throw in for whoever picks up! Included with the gun is A Donny FL Sumo Suppressor with the extension, the muzzle break add on piece for the sumo, An mdt vertical elite ar grip, the red trigger with setscrew, Eagle vision adjustable 30mm scope rings, a like new Arken ep5 5-25x56 30mm tube scope, a like new purchased for this gun air marksman 4500 psi 9.0L carbon wrapped tank with a saber tactical value installed on it, and the Fx Panthera 500mm .25 shot about 300 times. I may be missing a few items. Will also come with a few tins of fx pellets, fx slugs, zan slugs, nsa slugs. The gun has one small mark that i know of right where you attack the sling behind the scope from the sling and one small mark on the windage dial on the scope. Everything is like new and looks that way. got a lot invested here so I'm not looking for lowballs. I would like to get $2800 for everything. If its picked up you get a free compressor too! I may be missing a few small things tbh too that i might have installed into the gun I cant remember if i did its nothing crazy! the Accutac bipod pictured is not included! can get more pictures for anyone seriously interested. I am located in Springfield Missouri Original case and sticker included. not sur if manual is still around! Gun is currently wrapped in a bandage style wrap. It can be taken off if u want but it is not stuck to the gun in any way and doesn't leave a sticky residue. It can be taken off and reused! Everything u see here is like new or purchased for this gun! I can ship all of this but i will charge u shipping! I accept PayPal G&S buyer pays fees, cash on pickup or PayPal friends and family on pickup! If u want a faster response hit me up 4172992003. If pictures dont load it says server error occurred text me i can send them there too! To sweeten the deal im going to include a fx pocket chrono v1 like new and a send it mv3 digital scope lvl another $500 in value for those two items new, which are basically new only used on this gun!

Edit starts here! Will part out items let me know what you want and your offer and I’ll get back with you. Texting for me works better! Phone number listed above

Tank and Valve sold! Everything else still available! if interested in something specific hit me up here or text me 4172992003!

For Sale:

1.) Element Titan Rifle Scope (got it in trade, but don’t need it). 5 x 25 x 56, 34mm Tube. FFP x Mil with Tree Reticle. Sun Shade and Power Knob included. No box or paperwork. No scope ring marks. Great Condition!

$500 shipped in CONUS.

No trades, please. PayPal Standard, NO F&F, I will eat the 4% fee.

Thanks for the look-see!

Mike



****

Utah Air just went through this .25 cal dreamline tactical and it is like new. For sale $1,000. No box. One .25 mag included. Folding stock. Imhave a brand new Arken EPL4 MOA FOR $300. $1100 for both.pics available. WOnt download here.

I have an omega little "pony keg" air tank that has been awesome for years.
It has 1000 PSI inside and it is stuck. I can turn the valve. Neither will letting the purge open (I expected that of course but I was exploring how broken)

My first instinct was to twist the valve off and I put the tank between my leg and was about to twist and then I thought about what the hecking heck I was doing.
Can our awesome community please tell me how to NOT blow my balls off?

I just want my lil tank back it's really great.

Never mounted (Real) ACCU-TAC WB-4 ARCA SPEC Bipod. The "Daddy" of all Bipods. Retails for $442.00 sells for $380-390 Will sell for $275 + 1/2 shipping.

Been scrolling through amazon lately and pondering a IR-NV unit for a little after dark pesting. Pard, Oneleaf, Starstrike etc. There are numerous brands and they all seem to look like they do exactly the same thing. I've watched a good many videos of the fellows in the UK and they mostly use Pard. Was curious if any of you have bought and used any of these and what are you thoughts on them. TIA

Thx
Ray

Over the last couple of weeks I did some “horse trading” and traded off a couple rifles that were not seeing the light of day. The net results were a pair of RAW HM1000X LRT’s in .30. One new (the black one) and a pre-owned (blue) one. I have owned two LRT .22’s and a .25 previously and was familiar with the platform. RAW triggers set the gold standard to what other mechanical trigger should attain to be.

The weather was mid 40’s with a steady and cold rain. The wind was mild at 3-5 out of the west, at my six. I had hoped to test these at 100Y but since I had to dial in the scopes and it was raining, 50Y was all I wanted for the conditions. Three shot groups were enough to fill the bull areas. I wanted to get a feel for what pellets these dispensers preferred and quickly realized they both preferred 44’s to 50 and 56 variants. This concurred to what info I was able to find in the search function on AGN and other forums.

Unable to post pics so I guess you’ll have to use your imaginations until they fix the forum.

Reximes Meta .177 in like new condition. It is an excellent shooter, only selling due to converting my M3 to .177. Messgae me for pics, due to still a server error.

Let me start by saying I have relative brand inexperience (FX, snowpeak, Hatsan, Air Venturi) and also limited after sale parts needs (orig hammer for FX and would have liked an extra poppet for my original avenger while I owned it but wasn’t avail during ownership period).

That out of the way, a couple of posts regarding parts availability I’ve seen lately had me thinking.

What brands can you contact after sale and order parts for? Let’s say for example you need a new cocking linkage arm for brand “X” pcp, what brands can you get after sale OE parts for?

I know for me this has been a concern when looking at investing a large amount of money on any of the Eastern European brands, example Taipan.

Looking for actual experience here, not second or third hand info.

What say ye?

I have three of 'em, and I shoot them a lot, more days than not, the laminate Vet since '18. The Mutant and the brown Vet are the most recent and have been occupying most of my time...I "KNOW" these guns and have taken the time for familiarization simply because I enjoy shooting and owning this platform, an important point over look by many...getting to know your gun doesn't happen in just a few plinking sessions...IMHO. I did an informal test (comparison) of my 3 Taipans and a Kalibergun Mini Carbine being the odd man out...all .22 caliber with JSB 18's @ 35 yds sitting in my (easy) chair resting gun on my knee, as my custom is. I shot two sets of 4 targets at least 5 shots each...Mini was first. Mutant, Brown Vet, last Laminate Vet. Mini was (is) hamstring by an inferior trigger, lower X scope 16X but still a great gun...but not in the same class is Taipan, (groups speak for themselves), The Mutant was aquired from member Shambozzy a few months ago, (bless him) bought new in '15ish, and is all factory original, somewhat lighter than current Mk1 Vets...the shown groups attest to my feelings about this one...this Mutant shoots CPHP's, you would have to see to believe. Brown Vet, actually has a coffee Laminate stock but I have an older Ukrainian stock on it...newer gun given to me to pay off a dept, may be most accurate of the bunch...example group says so, Laminate Vet...my pet with 40X scope heavy shot last in test, I was getting tired and shows in groups. Note, Mutant and brown guns are wearing Veyron 6X24X44 scopes...I highly recommend. The 3 Taipan's triggers, cocking and general balance feel and preformamce are identical consistent...can't tell the difference. The takeaway from this test...Note the best groups from guns I have been shooting most and the Mini's inferior trigger groups, the laminate Vet was affected by wind weight and being last shot. All regulators are a factory...all HSA at between 825-860 fps...pellets lubed but not sorted...As for me, I'm sorry to see the Mk 1's discontinued...but I've got my share of them...Now you know why I'm a fan boy!

This is my Ghost. There are many like it, but this one is mine. I must master it as I must master my life. My rifle, without me, is useless. It’s an adventurous challenge with any PCP……..

A friend recently bought us an Arken Optics EPL-4 6-24X50 FFP scope when it was on sale last month. (You can't beat friends like that! God bless him!)


I'm loving this scope. But what do I know?

A lot of people on this list really like Element Optics Helix scopes.


Now he's thinking of buying an Arken like ours for himself.

Do any of you have experience with both Arken vs. Element Optics scopes? If so, which do you recommend he get?

Also, does Element Optics run sales on their scopes like Arken?

I saw that Donny FL’s website is up and selling moderators. Does this mean he’s back in favor with one of the three letter agencies.

Ernie

I received my Akela the other day; I was leary because I shoot left-handed;I shoulder it, and it was okay.
Now I realize why so many people like them. They fit well. The next thing was mounting a scope; I mounted Hawke Vantage with medium rings, which was too low, then used Burris extra high rings; Burris makes some Great rings. But the scope was too long fir my taste;I like good aesthetics,so a shorter scope was in order,I know I had a Westhunter, some were, but then I stumbled on my Barra scope 4-12x40, now we be talking, great scope.....where is my setup, oh high rings. After mounting the scope, my first shoot with no setup was very close to my aim. Great,I am happy; I may be converted now, maybe.OK,I must wait to post a picture

Regulator was rebuilt. 600mm .22 cal barrel on it. Liner is fairly new; superior liner. Has barrel band tensioner. Power plenum. Dual transfer port. 480cc bottle. Upgraded to MK2. Really set up to shoot slugs. Comes with an aluminum moderator. Brand new wika gauges. 1 .22 cal FX side shot magazine.

Will ship in an FX Impact hardcase


$900 local pick up in Sacramento or Bay Area PREFERRED.

$950 shipped CONUS

I shot my 18th squirrel with my P35-177 yesterday. I've also shot 18 with my P35-25. I had two run after impact with both guns. The 25's two were front of chest shots that probably only got one lung. The 177s were through shots behind the shoulder. I had worse hits with both guns that didn't run. I think an additional factor is if the squirrel knows you are looking at it. It seems like they get keyed up to flee and at impact they do if they can. If they don't see it coming they are more likely to just collapse.

Does that make sense?

This is a followup to my previous post about my experience with FX. I purchased a new gun and received a very defective gun. It was a terrible experience. I finally received a new replacement gun and it is defective as well. Unbelievable to get 2 back to back defective guns. The new replacement gun leaks the pressure out of the cylinder. The shop I bought it from suggests that I spray soapy water in several places to detect the leak. Anyone out there have any suggestions for me? Im pretty disgusted with this total experience and am disappointed in the investment I made into this PCP world. It's hard to understand how FX gets the reputation of being the best but I can't seem to get the support I need to get a properly functioning gun. Are there classes to take on the disassembly, repair and reassembly of these guns? If so,are they any good?
Thank you all for the feedback to my prior post. I appreciate all. Merry Christmas to all.

I have a Fx impact barrel and shroud in .177 for sale or trade.
Trades could be any pcp accessories just let me know what you have. Thanks
I’ll take 100 cash if you wanna buy

How accurate does everyone think the gauges on guns are? I have a TJ2 valve 9L tank, and alkin reg from top gun Airguns. When tethering my airforce Texan with an AAO upgrade the gauge and reg say 300 bar but the gauge on the gun is ready maxed out at 315. The gauge has to be off, correct ? Is there a way to get it calibrated?

Soooooooo, this was the problem all along. SMH! I shot about 100 rounds through my Texan trying to tune it and was wondering why my reg and gauge were so far off! Even shooting at 250 bar with my AAO kit I was slinging 350gr Nielson HPBT at 973 FPS!!!! Can't wait to see what it does on a full 300 bar and correct tuning!!!

I never shot it. Bought it and decided I didn’t need it. $300 shipped. 2 mags + moderator + barrel stabilizer. Has o-ring kit too. No scope or bipod.

BSA R10 MK II Regulated .177. Just back from Dave Slade. Match Master tune, resealed and regulator worked and resealed. New 400 cc bottle and new stainless-steel valve from best fittings in England. 100 plus shots per fill. Gun is a 12ft pound gun 725fps.
750.00 shipped Paypal F&F or money order.


tim

Hey folks! I'm in the market for a new not so heavy scope for my Bullpup (for shooting or hunting purposes) but I’m trying to avoid spending a ton of money.

I’ve heard a lot about top-tier optics, but honestly, I’m not ready to drop a fortune. I’m more about balancing performance and budget. Anyone have recommendations?

I’m looking for something that gives good clarity, decent range, and solid accuracy without being overpriced. Maybe something under $300 (but open to suggestions if it’s really worth it).

For context, I’ll mostly be using the it on a medium-range shooting. Precision matters, but I don’t need pro-level gear for now.


What do you all think? Any mid-tier scopes you’ve had good experiences with I’ve seen a few options, but your feedback would help a lot!

Thanks in advance!

---

Feel free to tweak it as you see fit!