Head to your closet/man cave and post a pic of your SHTF platform, and what else is in that Go Bag.

Mine?

Platform:

Leshiy 2 in .30 or .35

Go Bag:

Iron sights
Titanium hand pump
Ammo
Speed loader
Mags
EDC knife and tools

Pssst...That's kind of the noise this makes with the suppressor. 91 fpe 22 cal slug gun. 750 47x

You can see how much the poi went down when I added the suppressor in the bottom sighter on first card.

The gun will shoot another 8-10x without it ...but for those that want to shoot in the backyard it still does pretty well.

Wind was 3-10.

Mike

Leshiy 2

*350cc cf bottle
*350mm .25 cal barrel installed
*250mm .30 cal barrel
*4-.30 mags
*2-.25 mags
*2- mag carriers
*2- extra .30 mag plates
*1- .25 cal speed loader
*1- regulator wrench
*Spare parts kit

Pcp shows minimal signs of wear

I am looking for $2500 with listed items above,
I do have a MTC Prismatic SWAT 12x50 scope that can be added for additional money.

My DRS is experiencing a low velocity first shot after it sits awhile. Any idea what could be causing this? I have already replaced the AMP Regulator because it was much worse, the first 3-4 shots were considerably lower than the rest after sitting awhile. It's just the first shot now, but for testing this is unacceptable because I don't always have the luxury of blowing off one shot and then go for a kill shot. Here is the result of a 5 shot string after it sat overnight:

FX Hybrid .22 22.0gr

Shot count: 5

Low: 761 FPS
Hi: 830 FPS
Avg: 815 FPS
Spread: 69 FPS
STD Dev: 26.8 FPS

1 - 761,FPS,28.3,FT Lbs,
2 - 828,FPS,33.5,FT Lbs,
3 - 826,FPS,33.3,FT Lbs,
4 - 830,FPS,33.7,FT Lbs,
5 - 828,FPS,33.5,FT Lbs,

Since only the first shot is 67 FPS less than the rest, I'm wondering if it might be the valve leaking off a small amount of air after it sits a while. Any thoughts on what I should be checking?

as much as i hate to sell this,
some unforseen car repairs have reared their ugly heads.

AGT Uragan 2 .25 600mm "unchoked" barrel,
in green laminate.

got from tony at talon tunes this past october, gun is gorgeous,shoots as it should,
and has performed wonderfully

could easily be mistaken for new,
only mark on it is on the cover to take the reg out to adjust (pin pliers slipped,pretty hidden,not very noticeable)

right now i have the reg turned down for 26gn fx hybrids around 960-970fps.

trigger is really really good,
i set it up for a long first stage,
and a super crisp and light second stage,
dare i say its better than my impact.

the bipod extension and small side rails on the bottle guard are included.

will come in rhe original box,
with 2 mags,
fill probe,
keychain,
factory soft case,
agt neoprene work mat,
3 boxes of zan slugs,
4 tubes of javelin slugs.

$1200 shipped in the u.s
paypal please.

So occasionally Evanix air gun show up in the classifieds and at times members join and ask advice about an Evanix airgun. I realize that Evanix is a GTA sponsor, but what’s your take on the brand? Why don’t AGN members discuss these rifles more? The most outspoken member I’ve heard talk up the brand and their extensive experience with it is @Nomadic Pirate 66. I’ve seen a member that does reviews cover a few Evanix air rifles, but I see very few members discussing these rifles.

If you own one, let’s hear about your experience with it. I see these as hunting rifles, at least the ones I’ve looked up. Anyone competing with one? Plinking? Pesting? How about posting a few pics of what you have to accompany telling us about your experience with the brand?

Up for sale is an FX Dreamline with Field Target Stock,
Walther ergonomic hand grip, tunned up by Manolo Gonzalez from Puerto Rico.
Upgraded Gehmann buttpad, single shot tray and magazine, (brand new)
Element Helix 6/24x50 with magnetic oversize paralax wheel.
Muzzle break, hamster, counterweight.
Brand new plenum not installed.
80 consistent shots per charge at 890fps with a extreme spread of 3 fps.

Has been my training rifle for my last 2 years of competition, 3/4 inch at 55 yards all day long.
Spotless gun ready for a new home.

Asking $1700 shipped and insured to CONUS only.
Paypal FF or add 3%
Contact at [email protected] or call or text to 561 260 2014

cool pcp

Went back and forth on just having our original pat pend adapter design milled but wanted to solve for some common inconveniences when paired with minimalist stocks. Took this opportunity to completely refresh the entire rear picatinny adapter concept from what previously exists.

This adds about 1 1/4" LOP vs current adapter offerings, so for the typical length minimalist stock, makes the stock'd up GK1 more ergonomic to shoulder. The CNC Rear Picatinny Adapter has 3 picatinny slots and adds additional drop to the stock alignment. This results in an even more comfortable cheek weld with low mounted optics and you aren't forced to use obnoxiously high mounted optics. Lastly, plenty of room for hand clearance while the stock is extended and used in collapsed form as well.

100% designed and manufactured in the !

PS - will keep the 7% off products code MEMORIALDAY2024 active through 6/1/24

I've been getting frustrated lately with some issues I've been having with some of my pcps so I decided to get out my 1961 vintage Sheridan Blue Streak. Holy crap!! I was shooting 13.73 JSBs and getting 5 shot groups at 20 yards that were 1 slightly ragged hole! At 10 yards 5 shots were 1 neat hole group that you would swear was a single shot. I can't get groups like that with my pcps! I was using a fairly inexpensive red dot sight and shooting from a bench. I have several old Blue Streaks from 1960 to 1977 and the accuracy of them never ceases to amaze me. Those old Sheridans are examples of quality craftsmanship from a time when such things mattered.

Huben slug - PEANUT
Caliber: 5.5mm
Weight: 2.16g
Qty/tin: 250pcs

The title says it all!

For the life of me, I just don't understand what I'm witnessing in the least! Now I know I'm sending a bit of power down range (100fpe) compared to many airguns, but I've never seen prey displaced at right angles of the projectile flight path. These .30cal H&N SLUG IIs are really something to behold!


As far as the young Starling that got slung completely out of frame, I didn't see that in the least in real time, and when I saw two starlings down when I walked down range, I thought it might have got in a fight with a squirrel or something!

So what gives?

Hey Airgunners,
my name is Martin, I am from Rostock at the baltic sea. In german speaking forums the Steyr ProX is not a big thing. I hope I will get more input from your forum.
Well, I have bought my Steyr just e few weeks ago. It´s a beautiful "toy" I think. The shaft is made of a wonderful piece of walnut and I have a lot of fun with my Luftgewehr.
My setup: Steyr Pro X .177mm, Element Titan 3-18x50 FFP APR-2D MRAD scope, Donny FL Sumo Silencer.
I´d like to get some advices how to make my gun better now. At first: Steyr made a "downgrade" in 2024 that was not told or shown on pictures. The Schaftkappe (...wait a minute...need Google translator... butt plate?!? I hope you´ll understand, but take a look at the pictures and you´ll see) is no longer adjustable. It seems to be glued. No screws, neither from the outside nor the inside of the shaft. I am not happy with it. I really want to change the "butt plate" to a modifyable one. Do you have any ideas?
Regards
Martin

What is the best cheapest fast drying spray paint to quick paint steel targets?

I was testing a rifle with a chronograph and tried these pellets since they are cheap. I got some crazy numbers. I then verified with my M853 and it happened with that rifle. I’m not buying any more of these Brazilian CPHP’s in 177.

I did a brief test with the 22 CPHP and they performed fine

I really like the look of this gun because it's a little longer than a bp but I was wondering if anyone has owned one . Thanks

Ataman makes a very solid and accurate rifle. This one is as accurate as you are, and has an excellent trigger and very solid regulator right at 35fpe. the soft touch synthetic stock is very nice for hunting. 3 magazines, varmint scope 2.5-10×42 and 3 tins of jsb 18.1 for $750 shipped obo.

Selling FX Panthera 500 - 22 cal
-Comes with everything that originally came with it.
-Will include two new tins of pellets
-Scope is not included in sale.
-Located in Murrieta, California
-$1,800

I finally found my land after beating the asphault, gravel and dirt back roads of Alabama, I found it in the Collinsville area.
Here's what I am wanting to do, the property is 25acres approx. 20 is wooded with trails and two feed plots. I am going to expand the trail system and add three more food plots. I am going to open it up to other hunters the criteria is as follows.
Firearm requirements:
*Air Rifles .35 cal min.
*Archery and crossbow.
* Powder guns must be well suppressed (no un-supressed powder guns allowed)

I am also going to allow disabled Vets access for no charge and will provide pcps to hunt with to the Vets who don't have one or can't afford one. I am retired from the Construction and Oil Field Industries, my father (God rest his soul) was a Big Game outfitter in Colorado and I have been shooting and hunting from age 7.
My biggest regret in life is that I did not serve our country. I should have listened to my High School Counselor Mr. Calderon who tried his best to get me to join right from High School. Of course, I didn't listen and things happen. At 24, I tried to enlist however by that time I was already busted up with a broken back in two places and other issues. It was a no go.

I want to be able to give back to our Vets and this is one way I hope I can do that.
I also would like to support the Airgun Industry by hosting shoots, not just bench rest but actual shoots involving hunting blinds, brush, angles of target ect. Much how archery shoots are done for hunting.

Anyway, any feed back or ideas would be appreciated.

Larry.

Brand new in unopened box. $400 + half shipping cost. It weights 35lbs. Shipping to CA can cost over $100. I take paypal.

Hi Friends, for sale is my beloved hunter compact in perfect condition! Originally purchased from the Pellet Shop, and extremely well cared for as you can see. All pictured is included. Selling to fund other toys. $1,650 shipped 48 states. I can take Venmo or Zelle, or PayPal f&f from buyers with good history. Otherwise it's best to go with PayPal goods, buyer adds 3%.

Here she is. Came yesterday. 22 cal slinging JSB Hades at 893 fps.
This thing is so small and light compared to my M3.
About 100 shots per fill too!

I am sure I am not the only 1 to experience this. Recently my pumpers have been getting less use. During the pumping of the rifle(392pa, and c9) the 7th and 8th stroke are a lot more force than the rest as pressure builds within the valve. Once I have shot the rifle several times I start getting a sharp pain in the elbow near the funny bone. I expect this is due to something known as cubital tunnel. Which I have been told I have. Similar to carpal tunnel it's just the nerve in the elbow instead of 1 in the wrist being compressed. Not severe enough to require surgery yet, but still a comprimise for some activities. Not a fan of the meds used for relief. I was reading through some old posts on here and discovered 1 by someone claiming relief from a laser type device. Some internet searching reveals it likely a red-light therapy, or ir type treatment device. They also claim it works and has allowed them to continue using pumpers with no other treatment. Now I have 1, it has 2 frequencies of red light and 1 ir spectrum light. Supposedly the ir treatment is best for deep penetration and joint problems from arthritis to problems like mine stimulating circulation in the effected area etc. Today is day 1, recommended treatment is a minimum of 3 weeks even if you experience relief sooner. I will let you know how it goes...either way if it turns out to be ineffective I can return it. Now we wait....maybe a couple days we pump, shoot and test to see if there is any appreciable change in symptoms. Any one else use 1 of these devices? Try any other methods for relief that were successful?

...after my recent experience with the Huben GK1 I found myself packing up all .30 cal. Ghost parts I just bought and getting ready to send them back for credit towards a .30 cal. Sidewinder...

...but when I was talking to Chris @ AoA I asked him why he bought a Ghost instead of a Sidewinder and he told me it was because he is a competition shooter...

...I am not a competition shooter but now I am not sure I want to go through with this...does anyone have both platforms...???...