Purchase this gun used from AOA. Just getting a chance to shoot it. This group is 10 shots at 75 yards using the JSB 25.39 grain at 938 feet per second.

I think I have a haenel177 pellet rifle but there is no Maker's Mark anywhere on it it does have finger grooves in the stock and I believed a rifled bore no lock or latch for the barrel to Cock it and cannot identify maybe someone can help I can't send pictures

I installed a plenum gauge and an accurate tank gauge. One original mag and an Orion mag. I set it to shoot Hades around 915fps. It’s very accurate and no issues. I just never shoot it. Will ship it in the original boxes I received it in. Price is $800 and we will split shipping.

I have two Shin Sung 9mm rifles. Bottom is a Fire 201 and top is a Fire 202. Willing to sell one of them and will keep the one that doesn't sell first.
Both hold air indefinitely and operate as they should. Sling and cheap scope will stay with the gun I keep. I've taken the 201 out for deer but not shot one yet. I have not tried to remove the camo stickers on the 202 but expect beneath it will be normal high gloss wood that's typical on these. The rear sight on the 202 needs a little work also but the 202 does have a desirable (to me at least) feature of a threaded barrel for a moderator. I can post more pics on request. They aren't perfect but nice enough for me.
$600 pick up in SE Michigan or add $40 to ship.
~dave

Hw44, with rinks carbine stock, ratworks airtube and a 310mm barrel for a HW110, Optisan cp 3-12x32 and a ODb 110 moderator for now
16 gr AA @735fps 30 shots per fill @200 bar

What weight pellet does the FX factory use to set-up the FX Impact m4 Compact

Rare cool eclectic piece for you airgun or Browning collection.
Electric cocking, loud but no effort, spring air .177cal pellet rifle. Like New in the box (with all original paperwork) and working as it should. I have the original battery pack but it doesn't hold much of a charge. It also comes with a brand new battery pack and the charger as well.
I can text more photos on request.
$750
Pick up in SE Michigan or can ship for an additional $40
Possible partial trade for other vintage or unique airguns or rimfire rifles.

Here's a YouTube video I found on the gun.

I'm trying to understand what the point of "tuning" is?

At the top level it seems it's all about accuracy... trying to get the best groupings for a particular projectile.

So you shoot a few rounds, watch the chronograph and keep changing pressure/fps to get the best groups.

Is this what it's all about?

Thanks

OK guys here's one I can't figure out. My scope is shooting at about 7 o'clock 3 inches from bull ( at 20 yards) and my elevation is all the way up. How can I get back to a normal adjustment. I had this rifle dead zero before. I moved the adjustments about 40 clicks and have no more room to go up. It hasn't been banged or anything. I really don't know what to do. Any help would be greatly appreciated

This piece that holds the poppet o-ring unscrewed after first 500 shots! It looks like I have to take the poppet out to screw it down tight with a flat head screwdriver. Should I use lock tight?

I am using a Skout Epoch in .22 cal shooting the JTS 22.07g pellets using the Lothar Walther Bull Barrel
Speed-980-985 fps
These are some of the best groups i have done at this distance







1 got away from me
very happy with the results
Mike

I posted pics a while back when I first purchased this rifle. Here it is complete and now scoped.

David Slade did the mechanical rebuild and it is making just over 6.7fpe with JSB 7.87’s. The stock has been refinished and custom machined muzzle piece installed. The SWFA 12x is mounted on Sportsmatch adjustable rings which are zeroed and the rifle is hole for hole accurate and an absolute dream to shoot! The original open sights have been set aside in favor of optics for my old eyes. Not bad for a 44 year old rifle.

Steve

Hey everyone! Looks like a nice and active community here. Glad I have found it and hope to contribute in the future.
For now I'd like some advice from the experienced members to help me set up my gun properly.
So I've purchased as the title says an FX impact M4 in 5.5mm caliber with an 800mm barrel and I intend to shoot slugs with it mainly, currently testing out ZAN 28gr and fx hybrids.
No additional FX accessories were purchased for it.

What I've noticed looking at numbers written by others and how my gun came from the factory is that that regulator pressure set at 150bar looks a bit too much?
I can't speak about accuracy just yet as the gun was not zeroed properly so far and it was mainly just shooting bottles etc, planning to do that this week if weather allows.
Bottle it came with is 580cc and it last me around 60 shots with the factory tune. Does that sound right?

Loving it for the few hours I had it so far so please let me know if there's something you think I should do straight away and ammo suggestions are also welcome!

Cheers

Selling or trade fx drs classic walnut 700mm .22 shp plenum . Comes with single shot loaders and one mag in original box . Two fill probes . Has bipod rail installed and a longer weaver rail installed,plenum pressure guage also .It does not suit me and I’m tired of it . 800 or trade

only bought two but what I found today was!!!:

1. trap master 1100
2. Two blue sheridians, one that needs seals and the other is just completely worn and gone
3. Daisy Red ryder of some kind, also just completely retired
4. Weird variant of a crosman 1377, didnt get but kinda regret, may go next time if its still there. I have a modern one Im modding
5. Sheridan vintage paintball gun
6. Sheridian .20 pistol (co2 possibly)
7. And some vintage pellets and bbs

There was also a bsa mentora or something, single shot break action

My shoebox compressor is pretty much the same as the rest of the Chinese budget compressors and I'm having a reoccurring issue that maybe some of you might be able to help me diagnose.
1. The pump takes a minute or two to pressurize before it starts building air. ( Hose remains unpressurized)
2. When the pump finally starts to build air it will overpressurize to the point I have to stop the compressor or it will blow a burst disc. Once I stop the compressor and restart it it settles in at the pressure of my gun and pumps fine the rest of the day.
Could this be a bad check valve? As I said once pressure starts building it works fine the rest of the day and pumps quickly.

What can you take down with a sub 12ft air rifle at close range? Up to 15 yards? There is mixed opinion and morale police everywhere saying should not shoot with a sub 12ft air rifle yet there's others who say you can do it

I'll start this show...and fire flew from his fingertips........
Been using the Yong Heng $250 compressor now for about 5 years. I tell ya for the price it cant be beat. I like the water cooling...fill a 5 gal bucket 1/3 full water drop in 5-6 ice cream container blocks of ice. Can fill my 60 minute SCBA in about 1/2 hour, have four.I drop the tank in the bucket with the ice. Have the brass colored tubes with the fiber filters, all works good. I see there are alot of new style compressors out there now. I know all would like to here your reviews pro/con. Thanks...Pete in Montana

Two nights ago I was cruising Ebay, lo and behold, some guy was selling a pair of 777s in the original boxes and pretty minty conditions for 600.00 buy now for the pair. I contacted my pen pal air gun buddy 1000 miles south of me and said, "are you going to hit buy now or am I?" He told me to go ahead. So in a couple of days I will have a nice 777 to go with my NTM CMP 853. As my buddy will as well. As a 70 yr old I am kind of excited as I gifted my 717 recently due to the acquisition of a nearly NIB 46M. But after reading about Daisy 717,747 and 777 I have been on a casual hunt. I was shocked to see the pair for 600.00.

Is there a place that makes custom springs ? Thinking of a spring being made for a TX200 but a 9.6 FPE (apx.) ?
Thinking of a plug and play situation rather than cut and shim game .
(maybe too much coffee thinking ?)
Thanks

Hi,

I've been shooting centerfire the last 3 years, so I haven't been keeping up with Airgun developments, but recently my last two PCPs (RAW HM1000 and a FX Crown Continuum) and a bunch of my powder burners were liberated from my storage unit. I was storing them while our house was being remodeled and I thought they would be safer in storage than in my house with all of the construction crews coming and going, but that proved to be incorrect. At least it is all insured.

I still have all of my filling equipment and a ton of 25 Cal ammo, so I will probably buy a least one new PCP. It will be used primarily for practice and pest control. The FX DRS Pro/MDT is interesting because I run a MDT ACC Elite Chassis on my primary PB competition rifle, but it's expensive and has a very limited shot count. I'm also considering the FX King (probably would buy a synthetic and swap out the stock for a Saber Tac Chassis) and maybe an Impact. I owned one of the early Impacts which I really liked, but I ultimately sold it because I spent more time tinkering with it than shooting it.

I'm assuming the newer Impacts are probably a much more stable platform than when I previously had one, but I'd love to hear from some folks that are currently running Impact M3s or M4s. I know they shoot great, but I want to be able to take an air rifle out of the safe and know I can pop a pest with it even if I haven't touched the rifle in months. That wouldn't have been the case with my first Impact. That was what I loved about the Crown. It could sit for months and would never lose pressure and would shoot just like it did when I put it in the safe.

If you have personal experience with any of these rifles, I'd greatly appreciate hearing your thoughts. I'm probably leaning towards the Impact right now primarily for it's versatility and accuracy if it's not going to be a maintenance headache.

Thanks in advance for your thoughts!

There are a lot of bottles, reservoirs, z-valves and regulators selling at Ali Express.
But where can I get another parts such as trigger mechanism and breech, for example?
To made by myself? Or maybe somewhere I can buy it?
I hate to make trigger mechanism

Have no use for these, some came off of rifles I upgraded to larger CF cylinders.
All but the one are M18 thread.

Aluminum Air Cylinders:
0.5L 300 Bar (2) - $35 ea
0.5L 200 Bar - $25 (silver)
0.38L 200 Bar 5/8-18 - $15
0.35L 300 Bar - $25
Plus shipping

Paypal, PP F&F, Zelle etc

I just bought a m4 impact sniper a couple days ago from a local dealer close to me. I haven't even shot it yet but I was playing with it when realized it has a 480cc bottle. I checked my receipt and he charged me for a sniper. I measured the barrel and it is 700 mm so that is correct and it has the moderator included. I was just wondering if there was some version that came with a 480cc bottle or if I need to contact my dealer and get it swapped out for a 580cc bottle. I don't want to be that guy but I also spent over two grand on a new rifle so I kind of want to get what I paid for.
Also the case was cut out perfect for the 480 bottle and not a longer one so I don't know if that means anything or helps

Looking to see if there’s any interest on this fine modified Shorty of a beast.

It’s a 30 caliber Western sidewinder with a shortened crowned 350 mm barrel. Upon initial modification behemoth was clipping a little bit so I bored out the suppressor so that Rounds would clear for unaffected accuracy. Overall length is about 27 inches. Comes with original sidewinder bag. Shoots 47 grain NSA slugs at about 825 with a high degree of accuracy. As most of you know, it’s select fire so it’s semi automatic or fully automatic. All modification work on this piece has been beautifully done. Prism scope not included in pricing. Looking for 1600 shipped. PayPal friends and family.