I have a problem with Fx Maverick Sniper which is more of a crunch.
1. Regulator 150 Bar
2. Regulator 110 Bar
The manometer, which drops to 100 Bar in 2-3 shots, reaches 110 bar in a very long time. Affects projectile velocity.
The rifle hasn't even fired a new 100 shots yet.
Does the regulator recover as the number of shots increases or is there a problem?

Stopped by AoA today... Give them a call and they will wrap it up and send.

I installed a 800 mm barrel tungsten hammer and opened up the ports on the valve and block non power block impact M3 I maxed out the front reg didn't have a way to bypass it here and set the rear to 180bar 250 bar fill 44 gr h&n slugs running 1000 fps for about 25 shots the last 4 drop down to 990 power wheel on 8 and micro on 4 valve up front opened up all the way and a slug probe should I be getting more velocity or shots it's 250 bar 580 cc tank or maybe I need to open the block up some more ?

My FX Crown side cocking mechanism is stuck in the back position, can move it into the barrel but it won't pull all the way back to cock
What might be the issue? is it the screw that holds the stacked cylinder shapes parts together connected to the cocking arm?
Thanks

I have a Bintac B&W M50 for sale (.495 caliber) for $600 shipping included. I have only shot this gun once where I put about about 50 rounds through it. Seems to work fine. I need to part with it to pay some bills with Christmas season coming around. Nothing wrong with it. I have the original box and it is still under warranty with Bintac LLC. Scope not included. I also have about 50 rounds of Mr. Hollowpoint .495 caliber slugs I'll throw in with the deal. Comes with two 6-round mags and a fill probe. I will ship with a tracking number to you.

I purchased this rifle from AOA in March of 2021. It is the full length version, and obviously features the sporter stock configuration.

This would be an excellent "heirloom" rifle for someone new that is thinking about purchasing a quality pcp. Built in typical german fashion, there is absolutely not much for one not to like. The magazine system is flawless, simple, durable, and as easy to load as any on the market. It is absolutely the most quiet rifle in my collection. The adjustable trigger is perfect

One small issue is that the magazine slot is so narrow, that a Patch Worm won't fit in it and make the turn. I resorted to cleaning the barrel utilizing a half mag of felt cleaning pellets.

A couple of the stock screws moved slightly when checked. The scope screws were all at the proper tension when checked, so I moved to the indoor test range, following up outside at 52 yards with a group just to be certain the results were within a reasonable anticipated outcome, given the reported 8 mph crosswind conditions.

This is certainly a rifle that can be passed down for many generations.

I have a selection of ammo for sale. I traded the guns that I bought this ammo for so am selling these for slightly less than you can get online anywhere and am throwing in the shipping costs. Here is what I have:

4 tins JSB .35 Diablo (100 rounds each tin;unopened tins)...$80 with shipping included
3 tins JSB .30 Diablo Hades (150 rounds each tin; unopened tins) plus 2 tins of Vortex Strike .30 (100 rounds per tin; unopened tins)...$95 for all 5 tins with shipping included
3 boxes of Seneca .45 166 grain Semiwadcutter (50 rounds each box; box opened just to show the pellets in picture below)...$75 with shipping included

Or take everything for $225 with shipping included. Message me if interested. I will ship to you with a tracking number.

Up for sale is an Feinwerkbau Sport 124 in .177 with a Maccari laminate stock. It is a beautiful rifle in excellent condition. I was looking to buy either this rifle or a new HW95. Mike Melick told me to grab this rifle as fast as I could. lol

It is a nice rifle but I never got into it. I have put about two dozen pellets through it. Velocities are 732, 733, 739, 737, 739 with Air Arms 8.4 grain Diabolo Field pellets. I remember it not being as smooth shooting as my Air Arms Pro Sport and I wasn't fond of the trigger. But I also fell into the deep end with pcp rifles around the time I bought this rifle and I really didn't give this rifle a fair shake.

I am looking to get $525 plus 1/2 shipping, insurance via Paypal. If you elect to pay via goods and services please add the fees. Continental U.S. only. In case my pricing is way off, I will entertain reasonable offers. Low ball offers will be ignored.

Thanks,

Taso

When do you think the new Fx Impact M4 come to market ?

Don't know the timeline between m1 m2 etc

Thx

I kind of snuck up on this one, about ten yards.

Selling my Impact X 700mm .25 cal, awesome gun, has a slug liner, pin probe, and Huma dual port in it now, but has original parts and pellet barrel with it. Comes with the fx hand pump and custom adjustable butt pad/bag rider aswell as original but plate. Also with it is a brand new in mounted Airmarksman Backbone 30MOA rail. OPTIC and rings not included, BUT I have another scope(the one it came with when I bought it used) and also a bipod, can be sold with either at buyers request and pricing discussion. Shooting NSA 34.9s @ 960 right now, and is an absolute high out put tack driver.
-pin probe and housing-105
-Huma high flow dual transfer port-60
-heavy liner-110
-pump-240
-backbone rail-270
-Impact (all old parts included)-1600

Asking $1700 and buyer pays shipping (offers welcome)

I have 14 tens of crossman premiere domed pellets for $150 shipped to your door.this is some of my overstock! [email protected]

Up for sale is an Air Arms Pro Sport in .177 caliber with beech stock. I bought the rifle new from Pyramyd Air. I immediately installed an Air rifle Headquarters "TX200 MK3 - Maccari MK3-5-Pro Sport Kit-FAC" tune kit. The rifle shoots like a dream. Currently shooting Air Arms Diabolo Field Heavy 10.3 grain pellets: 687, 690, 685, 690, 687 fps.

The rifle is in excellent condition save where my XS28 loose barrel fell off my table and scraped up stock by the pistol grip on the left side. I only mounted one scope to the rifle so the metal work is almost mint except for one tiny circular spot. I don't know if the rifle came like that from the factory. I don't recall how I could have caused it.

The only reason I am selling is because I have less time to shoot and when I do I grab my Air Wolf. So I will be listing all of my rifles that are sitting unused.

I am looking to get $750 plus 1/2 shipping and insurance via Paypal. If you elect to pay via goods and services please add the fees. Continental U.S. only. In case my pricing is way off, I will entertain reasonable offers. Low ball offers will be ignored.

Thanks,

Taso

Hello members
I'd like a reality check regarding whether I should leave negative feedback in a member's profile.
Here is why
This morning I found a classified for a gun I wanted to buy.
I Emailed the seller & set up a phone call.
I asked a few questions, but more importantly felt that the seller was OK
The conversation was cordial
I made a very reasonable offer and promised immediate PayPal payment (including fees)
He agreed
Then, the moment I had finished sending the money in came a text telling me he had accepted a full price offer.

He, of course, refunded the $ and the fees.
But that's not the point

I consider his behavior highly unethical and would like to say so in feedback

Thoughts please!
Ed

.25 or .30 DONNY FL RONIN LIKE NEW with M14x1 threads for airguns only. Fits a AEA CHALLENGER PRO and others. Great condition.
$150 SHIPPED.

Hello AGN:

I'm curious to see what current/past FX Impact owners think about the BRK Ghost. If you own (or have owned) an Impact, are you looking to get a Ghost in the near future? Please vote in the poll and, if you want to, provide any additional details as to why you voted the way you did.

Thanks!

Just picked up an EC 3000 at Pyramydair for 1,067.99 plus tax. Here is the link https://www.pyramydair.com/shared-s...b664be&refId=f7649b174a7feff21ba95716a1cd7ca8

Used Code blckfry11

Snowpeak M40 .22cal semi automatic Pellet rifle With a beautiful Woodstock. Rifle is like brand new and shot very little . It was purchased as a new toy. Comes with fill probe, extra orings, 1 magazine, And a optima 3-9x40 AO scope,owner's manual, and shipped in the factory hardcase. Very fun $450 shipped TYD. [email protected]

I have a very hard hitting Hunting Master AR - 6 Bullpup with a beautiful walnut stock, 6 shot revolving magazine , red dot scope, Adjustable buttstock, and moderator. This is a very lightweight 5lbs. shooting gun that would be great for pesting. Very quiet! It has the option to shoot very heavy pellets With the length of the magazine.$450.00 shipped TYD. [email protected]

For those who have followed and watched my videos will know that I have began to shoot rats and left the bodies for coyotes to feed in hopes to ambush them.

Here is a writeup from the last couple of nights that I would like to share with you if you are interested to know what happened in the process.

I received a text from the farmer telling me that the coyotes are back and they had destroyed 5 of 8 chickens that were kept in a large outdoor fenced cage. 3 or 4 coyotes were digging the ground to gain access in broad daylight according to the owner. So I was asked to lend a hand to dispatch the coyotes.

My last attempt at a coyote at this location was 11 months ago where I missed (Coyote#4 video) the shot. So I was eager and excited to give it another go again.

I went there Thursday night for a quick set up of my blind inside an open barn facing the field where I bait them before. I shot a few rats with my HW100 and Hades pellets, but only collected 3 and left them for bait. Set up my trail cam and then went home.

So I was very excited to return Friday night to check on my trail cam as the three dead rats were gone. I opened the trail cam to retrieve the memory card and found out the batteries were dead. Damn...Did it even record anything? 1st sign of negativity. I turned on my laptop and inserted the memory card. My laptop battery was dead. WTF. 2nd sign of negativity. This was not going well. So I had no idea when and if the coyotes had came around to take the rats.

I wasn't happy with myself of not being prepared with back up batteries for my trail cam and of course charging my laptop beforehand. Things were not going smoothly and I just had a bad feeling that my hunt for the coyotes would not be a positive one.

So I gave up and just set up with my HW100T to shoot some rats so I can gather the bodies and leave them for bait. By now it was already 8:30pm. Luckily rats were coming out in the open and I was able to tag 11 rats and collected 7 big rats. 4 ran off into the holes and area where I couldn't access them.

By 9:35pm I heard coyotes howling in the area so I quickly packed up my gear, left the bait in the field where I had previously ranged out 25 yards from the blind. I moved my vehicle out of the way and settled inside the blind with my FX Impact MK2 with the Pard007S night vision clip on scope. My ammo of choice was the H&N 27gr Gen 2 slugs.

I had set up my shooting table and chair inside the blind facing the field thru one of the windows. Hot tea in my thermos and some energy bars in my pockets. I was ready to grind out for at least 3 or 4 hours until I see some action.

So the wait begins... An hour past and nothing. Then I saw something moving low on the ground. I quickly turned on my Pard007S and saw a rabbit about 15 yards in front of me. I filmed it for a bit, thought about tapping it, but rabbits are not on my list to pest at this location.

If anyone has done night time coyote hunt in the cold with an airgun will understand how tough it is to sit there in the dark, afraid to move around too much with fear of making too much noise. When you are in the dead of the night, every little movement you make like shifting in the seat or leaning of the table get amplified 120 percent. I never realized how my table squeak at the joints and how noisy the seat cushion becomes when I move my butt. Very stressful as I didn't want to make any unnecessary noise to alert the coyotes if they happen to come around. On top of that, cold and fatigue creeped in fast and furious, a feeling I have had and experience in the past with coyote hunts.

Another problem I faced was the inability of my eyes to see in the dark without using any night vision gear. As you may have known, you get temporary blindness every time you look thru the lens so I tried not to scan the area too much with the NV. I would just sit there quietly (trying to) and stared out the small window into the field hoping to spot some movements. Anyone who says hunting in the dark is easy with NV scope is full of crap.

So the clock ticks on. At 11pm, I saw a white figure moving thru the fence into the open field. OMG, a coyote had finally appeared. I quickly and quietly got into position, leaning over my Impact. One finger pressing the external IR with my left hand and power on my Pard007S with my right index finger. With the narrow FOV I finally located the coyote to my left. I pressed record and chambered a slug, ready to engage. By now my heart rate had spiked into overdrive and I thought I was having a heart attack.

I took one quick breath and had my cross hair on the forehead of the coyote. At that moment two things came into my mind. Should I squeeze off the shot now or should I wait till the coyote moves to the baits? I paused and hoped that it will go to the baits and may be the other coyotes would show up as well. I had 7 fat rats there for them to feed and I should have better chances of getting a good shot off. So I thought....

When I had the coyote in my scope view, it was sniffing the ground 2 or 3 feet near the bait. So I positioned my crosshair on the pile of rats and waited and waited... Nothing came into view and before I could say SH!T, the coyote was gone and didn't' return.

Another hour had passed and still no sign of any coyotes. I guess they had spotted my hideout and knew I was in the area. That was the end of this hunt. I reviewed the clip at home and the coyote was only in the footage for less than 6 seconds. Looking closely at the timeline, I couldn't have squeezed off a shot anyway.

I reviewed the trail cam footage from previous night and there were three coyotes in the clip with the dominant one (female) eating all three rats by herself while the other two coyotes stood by. Unfortunately I didn't have spare batteries for my trail cam so I am not able to film the 7 rats that I left there.

Yup, it will be tough to sleep tonight. Damn it is 3:19am now as I am typing this last sentence. Hopefully I will get these coyotes one day soon.

Thanks for reading.

FX impact wood butt stocks for sale. Most are black walnut and I can also make out of custom wood also 60.00 each shipped.

Working on cheek risers....last pic is rose wood.

Willing to trade things that are cool also.

I picked this up at a local gun show back in October. Don’t know much about them. Thought they had gold triggers. This is a .22 cal. Any information would be appreciated. It also came with an Anshutz sight. Just doing some testing at this point and it seems to shoot pretty consistant so far. Haven‘t used the crony yet. Looks like the breach seal is a little flattened. So far it likes the Gamo Redfire pellets best at 20 yards and, JSB 18.13 allmost as well. Again I know nothing about the history of it.

UTG 4-16X44 30mm Compact Swat Scope, 36-color illuminated mil-dot, rings, and big wheel.​

$85 shipped PPFF

Benjamin Travelor 300+ shipping not used very much my airguns i usualy just hand pump em up so it barely gets used

Figured this one may get lost in the Black Friday forum. He just posted a video on his IG. Been awhile since there's been something new like this.