Hi. I bought a used NcStar Mark3 10-40x50 scope and trying to zero it in on 40m.
I started with 18x and hit low, I turned the knob "up" and had to turn all the way to the point it didnt go any higher and hit low 3 and 4 (red mark) but when I zoom in to 30x i hit black (blue mark) without adjusting the knob. I dont mind shooting with 30x zoom but utstyr hard to find targets at closer range. It looks like if I zoom out to 28x i might hit center tho, but this cant be right?

I seen folks use tap water distilled water, water wetter, Whats the deal is tap water fine followed with vinegar after a few months to clean up the mineral deposits, Is distilled water by its self bad, Do you need water weter if you use distilled water or should I just use tap water with ice.

Selling my crossman build to put the funds into a new project.

Trigger polishing and many small tweaks went into this little tack driver. Feyatchi optic and all the old parts included

Letting this go for $325 $300 $250​

shipped to anywhere on mainland USA. ​

No optic included

Gun and parts over $400 with taxes and shipping.

Build thread is on this forum. I'll try to put a link in this thread.

New crossman 1322 USA version 2022 (box)
Steel breech
Buckrail minimalist folding stock
Buckrail honeycomb grips
Buckrail plumper pumper
Buckrail suppressor
Crosman 1377 1322 SuperPack Pump RP Valve, Power Hammer Spring & Boss +25% Port
Extensive trigger work
Feyatchi red dot NO OPTIC INCLUDED
UTG dovetail to picatinny mount

I have been shooting springers for years and just bought my first PCP.
I ended up going with a JTS Airicuda Max in 22cal.
I wanted a regulated, wood stocked well built Multiple magazine PCP.
This one fit that bill. I was looking at an Air Arms S10 multi shot but decided to get The JTS to start with and learn about the
operation and function of PCP rifles. After this intro to PCP rifles I will most likely will purchase the Air Arms in .17 cal in the near future.
I ordered the JTS with an AirVenturi G9 Hand pump. It took 100 pumps to get it back to 3200 PSI yesterday. So far I have pumped it up twice.
The pump works very well but it does make you tired when you are 55 years old.
I was going to shoot after pumping it up but my heart rate was making the crosshair move around to much so I will wait for next day.
I have the new portable JTS compressor on order and should have it within a week. I think that will be money well spent.
I thought my Air Arms TX200 was accurate and fun to shoot but now I can see all the fun PCP guys are having and understand why. A PCP sure is different than lever.
I have only been shooting in my basement so far with the JTS but at 10 yards it is easy one hole groups ( I shoot with a rest) . I need to take it outside for longer ranges.
I like everything about the Airicuda Max, The side lever, the adjustable comb, wood checkering on stock, metal magazines all metal construction.
For the price point this rifle is amazing !!!!!!!!!!!!!!!!!!!!! Great first PCP for sure.
I will definitely be purchasing pellets more often now.
Looks like I am going down another rabbit hole !!!!!!!!!!!!!!!!!!!

Excellent condition. 37fpe. Very low shot count . Includes 1 mag, fill probe and 1/2×20 moderator adapter. Has extended bolt handle and original is included. She holds air and cycles perfectly. 15.89 Hades @995fps for 34fpe. 18.1 gets 37fpe. I have some 17.5gr NSA slugs arriving tomorrow so will update about velocity and feeding. Pictures will get posted soon. Please CALL OR TEXT. 503-504-708 four. USPS MONEY ORDER ONLY. Thanks for your time, Bill and Addi.
.UPDATE☆☆☆UPDATE
NSA 17.5gr make 944fps.

This is one of the test units. It's been shot on multiple rifles and does not clip.
Shot it yesterday on my Condor. Works good.

Carbon Fiber and PETG plastic moderator.
1/2 x 20 UNF threaded steel insert

Size: 5" (129mm) x 1.2" (30mm)
Caliber: 22
Thread: 1/2 x 20 UNF
Weight: 2.1 oz.






USED: $45.00 to your door.in CONUS only.
I will ship OCONUS but we will have to work out shipping.

PayPal only. I will invoice you via PayPal once I have your Email Address.

Money back upon return if you are not pleased for any reason.

Being a lefty is hard sometimes. Thankfully some companies put out accessories that even the playing field. FX Maverick .25 sniper with Saber Tactical adjustable butt plate and cheek riser. Rifle came Friday, put a tin of FX 34’s through it yesterday to settle it in, today found a decent tune with the swirling 10-15mph tail winds in the rain. Splatter burst is (5) 5 shot groups at 50 yards, 8” gong is (3) 5 shot groups at 100 yards. FX 34’s going 895fps.

Sold

Carbon Fiber and PETG plastic moderator.
1/2 UNF Steel Thread Insert

4" (100mm) x 1.2" (30mm)
22 Caliber
1/2 UNF thread

$48.00 to your door.
CONUS only.

I will ship OCONUS but we will have to work out shipping on that.

PayPal only. I will invoice you via PayPal once I have your Email Address.

Money back upon return if you are not pleased for any reason.





Pellets are not part of the deal. They are there to show scale.
Muskrat pelt also not part of the deal.

Kral Puncher NP-03 .22 Cal

Includes (4) Magazines .22 Cal
1/2 x 20 Thread Protector
Single Shot Tray
Upgraded to the Biathlon Cocking Lever which feels way better than original but original lever will be included.
Fill Probe
Kral O-Ring Spares

Scope and bi-pod are not included, but the DonnyFL moderator is! Asking $385 which includes shipping inside CONUS!

I have several containers of .177 pellets that have developed a gray coating ( oxidation? ). Tried 24 hr. soak in vinegar without elimination, Also same period in a tumbler with cleaning granules that effective removes tarnish from brass cases. Any suggestions appreciated.

SOLD

4 in x 1 and 1/8 in
1/2 UNF threads
17 caliber
$47.50 to your door.
CONUS only.

I will ship outside of CONUS but we will have to work out that price.

PayPal only. I will send you an invoice after I have your email address.

Money back upon return if you are not pleased for any reason.





The pellets are not included. They're there to give you an idea of the size of the moderator.

I am looking at a package deal from Airguns of Arizona link, just need a push to pull the trigger. What do you think? It would be my first .25 PCP.

.177 or .22 or other ?
Just to mix up the forum;
Pick your fave/go-to
No explanation needed.
Going to leave it open for 20 days so that loads of people get a chance to vote!
Let the votes fly!

Okay, I am wanting another gun, and budget dictates one must go, this is the Uragan Compact I have had for about the last year in 177. Search my posts and you can see how accurate the gun is, the accuracy and the shot constancy, it's all out there. Plus this little sucker seems to like JSB 10.3 grain slugs, rare for a Uragan Compact. The gun is in near new condition. And no, I am looking to sell not trade unless someone has a RTI Arms Prophet 3 Performance Compact with both 177 and 25 cal barrels.

The bits below are included:

1. Uragan Compact in 177 / 4.5 mm
2. Stock ATG Moderator
3. 2 stock ATG magazines
4. CARM single load magazine
5. CARM rotary magazine
6. Fill probe
7. ATG case
8. ATG Fill line (IMHO useless)

Price: $850 plus half shipping, CONUS only sales and PayPal Friends and Family, pre payment required before shipping. Folks I have a good rep here, so you can buy in confidence. If I say the gun is great, it is great and this gun is great, I love it, but I want something with more punch. Also I have taken birds out to 60 to 65 yards with this gun using 10.3 gr JSB heavies, which is pretty good for a 177.

Current settings is around 17ish ft/lbs, JSB 10.3 gr Heavy are the pellet of choice, it does NOT like Hades so don't get your hopes up, but like I said it does seem to like the JSB 10.3 KOs.

This rifle is in great condition. Low shot count. No modifications to the inside of this rifle. This rifle is not regulated. Check out Air Force site for specs on this rifle.

All originally supplied accessories. It is 18”unchocked law barrel, vented bushing, Mad Dog stock, trigger tuned by talon tunes, custom 4 baffle shroud, and bipod. I am including a DonnyFL 1/2x20 UNF Double Male Adapter, a $40 value (a moderator is NOT included). Has a small crack in it. Can be seen in the picture. No scope or rings are included.

Asking - $500.°° plus shipping. "Reasonable offers"will be considered. May consider trades. Looking for a pistol PCP.

I ONLY SELL AND SHIP IN THE CONTIGUOUS UNITED STATES.

Payments accepted - Cash App or PayPal accepted. FF or add 3% for fees.

***SOLD***FX Maverick .25 Sniper 700mm barrel plus 580cc tank. This Sniper version gives you the most power and velocity of any gun in the Maverick line, plus more shots due to the larger 580cc carbon fiber air cylinder.
Comes with 1x mag, FX hard case . Super powerful and laser accurate 3/8" groups regularly @ 50 yards
THIS Rifle IS AS new----- I have made NO adjustments to rifle. Scope, rings, bipod NOT INCLUDED.
$ 1440.00 SHIPPED to your door lower 48

PayPal gift or add 3%! Serious Buyers ONLY Please

Hello everyone. I am looking for some recommendations for a 22 cal air rifle with some specific specs if possible. It doesn't have to be out of the box, but at least modifiable to obtain these specs with some extra $$.

1. $1,000 or less
2. Regulated
3. At least 30+ FPE (800+ FPS) and around 100+ shots per max fill

Thank you!!!

Best,
J.

This beta gun was strictly for review. It has no support directly from JTS but others do support it. This is the #2 rifle I have exactly the same, the other one I shot quite extensively. It is a razor. I added 2 of Hajimoto's Hight capacity mags which is all I use. I replaced the main tube o-rings for a perfect seal. $250 free shipping.

Howdy,
I am selling 27 tins of 200 count JSB .22 cal 25.39gr monster redesign pellets. One tin has a little shipping damage, and one tin has about 25 pellets missing.

Asking $10 each tin shipping included, so $270 for all. Pickup available in DFW Texas, and can save you the shipping. Will not split up.

Paypal only either friend and family or add 3.5%.

Please PM me if interested.

New to the forum, and pretty new to airgunning. I recently was given a Benjamin Trail .177 rifle that seemed to have a broken spring or something, because it would not cock , so I thought. I tinker with PB gunsmithing and think it would be nice to add airgunsmithing to my skills set. Anyhow, I ealized it actually was given to me cocked! Of course, when I first saw it I made sure there was nothing in the bore, so only air would come out if I went off, while always keeping it in a safe direction. I did get the trigger to release and the gun dry fired (once). I cocked it again the other day, going to test shoot it, and now it is locked up in the cocked position. Any advice on how to get it to release safely so I can disassemble it and see about beginning a repair on it would be much appreciated.
Thanks!

Had to switch scopes on a couple of .22's. I put a Aztec scope I had on my Savage .22. This is a 10 shot group @ 25 yards with CCI standard velocity ammo and NO they weren't all this tight, but shooting the ammo I was, it was a great group for the ammo. Lots of air gunners have shot PB's for decades, and know how to shoot, but are new to air rifles and know HOW to shoot if the rifle and pellets cooperate.

I finally caught the chicken killer

I was wondering if you’ve done it and would you do it again or go with the compact? I like short guns but I have a 480 cc bottle so I figured I’d buythe VP and swap out the bottle and save $200. Any thoughts?

I see at AoA some Weihrauch are on pre order with a deposit.

Has anyone got one on pre order and was given a E.T.A. Or just a twiddle your thumbs hope for the best till you may just give it up?