Why is FX still using the O-rings on their STX Slug tensioned barrel kit? I would think they would use the carbon sleeve over the barrel. Also this isn't really a Tensioned barrel. The barrel is only held in place by o-rings. The tension is put on the barrel liner. This should help with accuracy but it does nothing to help with the barrel harmonics.

I’m looling for a new portable, lightweight Doppler chronograph for my springers that is very easy to use. Does anyone have experience or recommendations between the Air Chrony and the FX Chronograph? Thanks

Opportunity strikes - here in Mobile Alabama, I am surrounded avid hunters and outdoor enthusiasts; yet few, and I do mean few, airgunners reside here. Lots of people may own an airgun but it’s a leftover novelty from their childhood. Most hunters here pay to be members of a hunting camp. The nearest FT location to me is over 2.5 hours and 2 states away. @BC, a very knowledgeable and accomplished FT participant is in the process of creating an FT location just 1 hour away to the East in Pensacola FL. Yea!
Contemplating this Void in the airgun world I realize that my community has an itch that needs scratching and they don’t even know how much they itch.
Question 1 - how much land and type of land does a quality FT club need?
Question 2 - how does one sell the powder burners on the idea of airguns, so they’ll not only participate, but also contribute to its success?
Those who have gone down this path before me, certainly must have lots of lessons learned to share! Ideas?
GO!

Selling my Kratos 22 cal looking for 750 obo with bipod and scope I also have the hand pump.with air filter I'd sell with it! Located in Huntington WV

Sold
ONLY LISTED ON AGN!!

I am selling my FX Impact Bronze MKII in .22 with many extras and upgrades.

• MKII with power plenum
• 580cc bottle upgrade
• 600mm barrel with both Superior and Superior Heavy barrels, ready to go if you want to shoot slugs or pellets. Heavy currently installed
• Dual Transfer port - Pellets and Slugs
• Carbon fiber liner tube included but not installed.
• FX factory moderator tube
• Monster Power Wheel - much better than factory option. Factory Wheel included.
• Saber Tactical Cheek Riser
• Huma_Air 1332 Max Grip Knurled Cocking Handle, more like larger M3 handle. Original included as well
• 2 x 28 Round Mags
• STUD " Mag Loader Kit, ( 4 x mag loaders, 1 x pellet sorter ) - Amazing addition!!
• Full O-ring Kit from FX
• FX Hard Case
• All Paperwork

This is a nice Impact that has been well cared for. I am only selling because I picked up a M3 in .25 to try out .25 for the first time.

Asking $1,450 shipped. I prefer PayPal F&F, but I am open to other payment types if needed .

I ship fast by USPS Priority, but can ship another method if you require it.

I have lots of feedback buying and selling here, so buy with confidence.

ONLY LISTED ON AGN!!

I bough my first PCP (.22 FX Wildcat mk3 VP Bottle) about 2 months ago. I have shot a couple thousand pellets through it (and some slugs) to find what brand, weight (14g to 30g) and power settings work best. I can get basically pellet-on-pellet at 25yds, and inside of a quarter with 10 shots at 50yds. But 100 yards is a different story. At 100yds I can hit a 2' x 3' target, but my shots are all over the place. When I make adjustments based on the previous shot(s), that usually does help initially, but before long I'm all over the place again. (I have not made any modifications to the gun at this point)

Can a slight wind be messing with my accuracy/consistency that much at 100?

Any suggestions on how to shoot more accurately down range?

I’ll make this short and sweet as I know this has been discussed previously on here but… As I’m breaking in my TX200 I have been playing with my zero distance and what I found was (in my case) zeroing my rifle at 20y gives me a much flatter curve than a 25y zero. I’ve just always assumed it to be the golden range.

I’ll post a pic below and granted this is very early in my testing and I only have ranges out to 40y but I’m wondering if I should go back and look at my PCPs (that shoot similar power) to see if this trend continues. Or if some odd first and second zero work better for them. I have only done this on 12x (max on my scope) but I played with lower magnifications and it doesn’t seem to change POI but much to a certain extent.

Has anyone else found an odd zero that works better for them? I know you can use ballistic apps but I’ve found doing it the manual way is more effective for me.

PS: Does anyone have a better way of storing holdover data? I plan to remake the yardage markings on the computer once I know they’re good to go. Would love to see what everyone comes up with.

Data:
TX200
Hades 10.34g
AVG: 786fps

***SOLD***

Up for grabs,
Is my one week old RTI Prophet II Performance in .30 caliber.
Only shot yesterday, off bench. Too powerful for what I need. I don’t know what I was thinking...
First five shots, I put across the chrony, shooting 44.75gn pellets, were all 915fps. Every shot.
So then I proceeded to sight in at out to 40 yards, which is one ragged hole.
I tried several LDCs and settled on the Tatsu. It did as good of job as the bigger ones, without the added length. Gun holds air, is accurate, and powerful. Not a thing wrong with it.

Will come everything it came with new, and the extras I bought with it:
Prophet II Performance in RTI hard case, and outer box,
an extra magazine,
RTI bag rider (these are sweet),
Prophet T shirt, and all extras.
Scope, rings, and moderator, are not included. No trades as I’m trying to downsize.
Priced to sell. $1540. PayPal f&f.

ARKEN SH-4 GEN2 4-16+50 FFP 34MM TUBE 1.5 20MOA MOUNT BUBBLE LEVEL SCOPE COVER 310 SHIPPED SCOPES WAS A DEMO MODEL WAS MY PERSONAL SCOPE HARDLY USED

I just ordered a FX MKIII in .30. Is there anything yall would recommend I do when I get it? Any pellet suggestions? Tuning? Ect ect....

Will JB Bore Bright make a difference? Is it worth the extra time/effort?
I, once in a while, will use JB Bore cleaning compound (blue lettering) when I feel that my barrels have endured lots and lots of shooting and starts to shoot a little off due to fouling. Would using JB Bore bright make any significant difference? Thanks in advanced everyone

Bryan @Cool_WhipDl650 , thank you again. A lot of people don't understand the significance of a property owner allowing strangers to shoot on their property let alone someone who'd been granted permission trusting another to keep their good graces.

Today was a total blast. Perfect weather, scenery, and equipment functioning without hiccup.

The supervet took a life at 77 yards today and the Caiman setup made me feel like Rambo shooting off hand and with a high success rate both near and far.

It was also great to see one of my first builds utilized today

Looking forward to many more days like this.

Also the farm cats were pleased too

#fxairguns #taipanveteran #taipanveterancompact #fxdreamlineclassic #utgbugbuster #utgleapers #athlonoptics #athlontripod #airmaksarms #usoptics #huggettmoderator #donnyflsuppressor #donnyfl

I hope I wasn’t the only person to see the Kral NP03 was on sale and available just a few days ago for $249.00

Grabbed one in .177. Picked up a reflex dot and a suppressor.

Always wanted a .177 dedicated to heavy .177 duties. Grabbed a single shot tray as well

If anyone else got one chime in here. Puncher breaker silent was / is on sale for 349 Also a steal especially the Marine model

I’m super pumped to get this at this budget price

AEA Assassin. .25 cal. Like New. Altaros Regulator with plenum. Reg set at 1900psi. Bottle/Barrel band. Upgraded stock, with cheek riser. Folding joint 500cc bottle. Put together, then tuned. A power house with high regulated shot count. Shoots 33.6 grain Nielsen and JSB 33.95’s lights out. Comes with original box and receipt from FOX. As well as an aluminum barrel shroud with the end caps included. Only a couple of months old. Extremely accurate. Can hit golf balls all day long at 60 yards. About 920fps. Only shot to sight in and tune so less than 75 shots. 895.00 shipped. Scope and rings are a little extra. 406 548 7761.

Sale Pending

For Sale BAM 50 .22 CAL
SOLD AS IS - Has a slow leak
New Valve, shoots very hard!
3D Printed Muzzle Break
Condition is FAIR
A tinkerer could get her back to 100%, or just piece it out for parts.
$100.00 + Shipping CONUS (Eastern PA)
Money Order / USPS Check / Personal Check
Will ship as soon as the check clears the bank
[email protected]

SALE PENDING


Tech Force TF78 Converted to HPA, CANNOT BE CONVERTED BACK TO CO2.
Gently Used, SOLD AS IS:
The tube was cut and threaded to accept the Hi-Pak HPA system.
Has TONS of Archer Air Upgrades:
Oversized Bolt, Barrel Weight, Upgraded Seal Kit, Hammer Debounce Device, Brass Trigger Shoe
Very handpump friendly, as it runs on 1750 PSI.
Original Box, Manual, and Original Parts Included.
$130.00 + Shipping CONUS (Eastern PA)
Money Order / USPS Check / Personal Check
Will ship as soon as the check clears the bank
[email protected]

I am wondering if I can breach load longer pellets in my Evanix Max .357 and is this a slug or a pellet? Thank you.

SALE PENDING

Beeman 1358 Bullpup For Sale .22 Caliber Underlever
Shoots Strong!
SOLD AS IS: Gently Used,
Original Box, 2 Single Shot Trays, 1 Magazine, Allen Wrenches, Degas Tool
4x32 Scope (Brand New), Scope Rings (Brand New), Owners Manual
Stock was modified to allow for side mounted bipod
Factory imperfections: (came this way, out of the box)
Cocking arm is slightly off center, (functions perfectly).
End-cap on barrel has slight bulge where it attaches to the shroud, (functions perfectly).
$120.00 + Shipping CONUS (Eastern PA)
Money Order / USPS Check / Personal Check
Will ship as soon as the check clears the bank
[email protected]

For sale is my RAW TM1000 in .177 in forest laminate benchrest stock with adjustable cheek piece. Selling due to our shooting club has disbanded. The rifle is in near mint condition. Accuracy is typical RAW. This rifle has scored a USARB sanctioned 750 score at 25 meters.
This rifle likes JSB Monsters. Currently shooting at 840 fps for 21 ft lbs.
Trigger is set at 2.5 ounces.
Holds air indefinitely.
Stock is perfect.
Scope and mounts NOT included.
Not looking for trades.
Will Facetime or call.
Not much action on Airgun Nation but tons of positive feedback on the old Yellow as JohnnyBravo.
Purchased from Ken Hicks at Southern Precision Air Weapons.
Reduced from $1675 to $1550 shipped CONUS ONLY.
USPS Money order preferred.

This gun is in like new condition. No defects on wood and metal. It has a solid blued muzzle brake from here:
That I permanently attached following the directions using jb weld. The barrel also has a matte carbon fiber sleeve for aesthetic reason only. I also installed a Maccari tune kit: https://www.airrifleheadquarters.com/catalog/item/251488/471773.htm
and seal. It is shooting H&N field target trophy 8.6 grain pellets at 740 fps for 10.5 foot pounds of energy at the muzzle. It has a quick, snappy shooting cycle and accurate up to my indoor range of 15 yards. I haven’t shot it further than that.
The stock is also from Maccari or airrifl e headquarters. It’s nicely figured in the butt region.
Overall a nice gun to shoot and own.

I would like $450 plus shipping to cont US addresses ground shipping (ups or FedEx) for the rifle only. We can go halfers on shipping since I don’t know where it will end up going to. If you want the Athlon Talos scope with sportsman mounts, add $130. The scope is also in like new condition. I’m firm with the price and not considering trade offers.

Payment via PayPal plus processing fees.

Thanks
Gabe

For sale a classic Edgun Leshiy with the analog gauge. Shoots great. Only shot target in the yard, probably only about 100 shots through it. Does not leak at all, of course.

Also includes a 10 pellet rotating holder/dispenser with detents, purchased from Europe, and a complete replacement oring set, as shown in the pics.

Has some light marks on the picatinny rails from scope and bipod, shown in pics. Comes with original box but please forgive the corners as they were lightly chewed by one of the puppies.

Getting out of air guns as I get more into archery.

I have almost the same name on eBay, j.b.426, if anyone wants to look at my feedback there.

$1,100 shipped TYD. PayPal F&F preferred.

Not sold but NLA



MOD EDIT: ADDED ITEM TO TITLE

all safe brand new carbon tank 5.80cc m18x1.5 threads was on my maverick its new also these are same size tank as a 5.80 fx tank