5 unopened tins from same batch # for $90
shipped to conus, PayPal FF works or please pay fees, if interested please PM

Selling as a lot, all tins are anywhere from half full to near full or full. 3 sealed tins are full of course and only 28 slugs out of 200ct box. Slugs in bag are freebies, $75 shipped to conus. PayPal FF works or please pay fees. If interested please PM me

This is a very nice example of an HW55T. It has a smooth shot cycle and is shooting
8.2 gr Meisterkugeln over 600 fps.

The metalwork is excellent with the exception of a scuff mark on the barrel (picture with the dime in it).

The stock is about average for its age. There is some fading of the finish under the forestock.
Looking carefully at the right side toward the rear of the stock you’ll see they used some wood filler. Purely cosmetic
but I don’t want a buyer to be surprised.

It’s a very fine rifle to look at and to shoot.

Includes the target sight shown.

$750 plus shipping. PayPal F&F or add 3%.

I got these 2 new toys delivered back to back. They’re both in.30 cal. I own FX guns, never a Crown and never a Daystate. We will see how this ends. I want to thank Tom for the beautiful Crown MKII.

Looking to trade my Edgun Lelya 2 .22 cal, comes with 4 magazines, aeon 8-32 scope, clone bipod, and fill probe. Currently shooting jsb 18’s around 860fps .The only trade I’m interested in is for a huban k1 or a W.A.R. Flex rifle.

Cash price is $1350 shipped for the combo
PayPal f&f

Today I received this B5 1 .22 thanks Tom #tkerrigan
took it out of the stock. cleaned barrel. cleaned up the mainspring as best I could without tearing it down. moly on both ends of spring. lubed all the moving parts. I did put 2 drops of chamber oil in the port. let it sit in the hot sun all day. Someday a full tune but fun for now.

I was only able to shoot it about 15 times at tin cans 20 yard just to test it. missing once. I have not tested fps but sure it's above 500. It is accurate little carbine, probably do to the fixed barrel. The open sights I had a hard to get a good sight picture. A compact scope or red dot hum. The trigger is heavy but breaks clean.

This is going to be one fun little rifle.

My one bitch about my sidelever guns. Most of us are right handed. Put the cocking lever on the left. It would make it easier to load while still holding the lever " I ain't trustin no anti bear trap" I've learned to load left.

Fx impact
30-500mm barrel kit with hi capacity magazine
I Can’t remember if they have the x liner or the superior liner..
No issues come with barrel, probe and magazine lightly used…
Asking 300 shipped
PayPal ff

What can I say? I read the glowing reviews, and heard the hype. So I needed to try some for myself.

The top of my shed is a rat highway. I set up my Wyze cam and HF ding Dong to alert me to them.

This morning at 03:00 a.m. I received the alert and grabbed my 0.25 Talon SS. Loaded a Predator Polymag and WHACK!

The force of the pellet hitting him back flipped him. Reviewing the carnage shows you the damage. WOW. I am, now a believer.

had a forum member come from iowa come to get his wildcat bt 700 snipper i tuned for him today, hes a chef pit master on the grill for a living food truck, best bbg i ever tasted pulled pork and brisket, his own sauce was to die for an my wife said its best she has had also, anyways we shot in the guns i tuned plus his mk2 25 cal crown while he was here and his slug shooting 22 impact with knockers at 986 fps wow, what a great guy to have as a friend we hit it off right away which was great. NORMAN RIED BLACK DEISEL told him aabout me and fx tunes what a great tday to teach him few things as hes kinda new but has top notch stuff, my back was very tired but i made it through the day as it was just plain out bad ass fun, glad to help out a fellow air gunner and get a great friend he was so impressed that made me happy to see the poop eating grin on his face, 50 yards as hole in hole those guns, here few pictures i took as we had our day in the sun. canwait till we di it agin as it will be more shooting than setting up guns which ireally enjoy anyways made my day as i have had health issues and to have a friend to come get his tuned guns plus tune and set up a couple more for him was just plain out great day, thanks for the gtreat day CHEF thats what i call him lol best bbg lol my wifes not yelling lol not sure what she was talking about

WELL ITS A MORE PURPLE REDISH COLOR CHANGES IN THE LIGHT, MOST NICEST COLOR IV EVER SEEN

For sale Edgun Leshiy 2 REPR 350mm .30 cal. Stock and unmodified. Alpha barrel. OEM silencer. Includes 3 black mags. fill probe, manual, pucks, 2 mag holders, OEM airtube, Edgun 300bar carbon fiber bottle, OEM box. Scope not included.
$1800.00 shipped CONUS.
PayPal F&F please. Please check my feedback. I can provide AGN references if needed as well.
Thank you.
Dave

Trade for daystate delta wolf.

What are some of the benefits of having a long barrel besides making more power? Let's use barrel lengths over 26" as examples. I bring this up as a topic as to me it's strange that manufacturers would not be putting more effort into shortening barrels to make them a bit more "harmonically friendly"?? Are longer barrels somehow more accurate than shorter barrels, or is it more of a fact without them they simply cannot make power to shoot slugs effectively nor efficiently?

sorry but this is a duplicate post

Just curious on your thoughts here. Everyone has different benchmarking and expectations.

It seems most new high end air rifles shoot pretty dang well out of the box.
Most of my rifles after tuning & pellet sorting will do about 1.5" at 100y.
Sometimes better, but I have none that will do MoA (1") on average at 100y.
My accurate rifles will do MoA at 50y consistently.

I'm talking pellets only here...no need to get into a slug discussion.

What average group size at 100y would YOU require before getting on a plane to shoot EBR or RMAC?

Thanks for weighing in!

Wondering and thinking is there a way to make some extra money Airgun pesting? How would I go about doing this? And how to find clients? Am I going to need permits or am I ok as long as I have permission from property owners? And also located in Maryland so not sure if that matters as well.

Just shot a perfect 200 with this rifle in the 30 yard challenge A few days ago. It’s a tack driver but some rifles have to go so I’m just thinning out the heard a bit. I bought this new several months ago From Talon Tunes. It’s a VERY accurate shooter using JSB 25.4 MRDs. Holds air forever. Reg is newer style and does NOT creep. Awesome trigger. The silver bar in the rear is a solid aluminum bag rider I made and it works great. It’s held on by a 1/4 - 20 bolt. Comes with manual, 2 mags and hard case.

I’ve sold lots of stuff here so feel free to search my history and buy with confidence. This is only for sale here on the AGN and If you see this for sale elsewhere, it’s a scam. Sorry, but I’m not looking for any trades. $1250 insured and shipped to your door in the continental US. PayPal F&F or add 3.5% to cover fees.

I got this from the UA custom shop.

Excellent condition, less the cosmetic marks on the tube. Which I assume are from installing the rail after the tube?









Comes with:

• AirMaks Katran C (compact) in .22 caliber
• Custom FDE Cerakote
• OEM grip + FDE Ergo Air grip
• 1 Mag, probe, degassing tool
• Metal M-Lok picatinny rail
• Bag rider with monopod
• AirMaks hard case

Tuned to shoot 15.9g at 775 fps for 20 FPE. 37 shots off a 250b fill, 48 shots off a 300b fill. 1/2'' UNF threads for your favorite moderator, 20 MOA rail, adjustable cheek riser, adjustable LOP, folding stock, great trigger, surprisingly accurate and nimble. Super fun backyard / 50y airgun (unless you're one of them long-range low power plinkers !

Retail value $1450, subtract 30% = $1008. And I'll throw in FREE shipping to CONUS.

*Scope & rings are not included

Cheers
-Michael

Closed and relisted with reduced pricing

New, sealed. Asking $200 shipped. PayPal F &F. Thanks!

I have 3 gages .25, and .30. Both new. .22 gage has been sold. Asking $80 shipped. PayPal F &F. Thanks for looking!

I have three PCP, Brocock Bantam (.25 cal, unregulated), Brocock Sniper XR (.25 Cal) and Daystate Redwolf (.22 HP). The Bantam I have maybe a 150 pellets through it - not enough to really get to "know" her. The Sniper, I just got her, so maybe 100 pellets (1 was dedicated to dispatching a rat Full Disclosure - 2 where shot at the rat), and my Redwolf less than 100.
I seem to notice shooting the Sniper and Bantam that the POI shifts. Example: The Sniper last weekend, I zero'd at 50 yards. 10 shots all in 1". Yes, I need to work on my shooting skills. When I was shooting at 25 yard, the POI was slightly to the left of the target and at 75 yards it was slightly to the right. Little to no wind, 72ºF, sunny.

Am I nuts? I'll take them out this weekend and shoot the above and get actual measurement's.
If it continues to happen, what are the fixes? I get that there will be a POI with distance in the Z axis, but in the X Axis?

Smitty

Hello everyone,

A big advantage of living way out in the country is that I have a lot of neighbors that have great big wood barns. All of theses barns have huge barn doors and I can ask very nicely if they mind if I come over and try to hit one of the doors .

I shot a whole bunch of paper targets this morning and for whatever reason was way off the mark....could not shoot a barn door....so to speak . For the last couple of weeks I have been stacking one pellet right on top of another and scoring a lot of 10's. Today I wanted to give myself a high-five when I shot a 9 .

Have any of you fellows ever had a day like that?

ThomasT

Just got my brand new donnyfl koi mounted on my impact mk1 25 cal but cant get any good groups, its really bad.
Im not complaining about the silencer im sure its me thats missing something when i try to tune the gun.
Im shooting with jsb heavy mk2 875 fps and target only 110 feet away 5 shot groups spreading about 2.5 inch.
I tryed many settings from 860 - 910 fps but nothing seems to help. after every setting i shoot 1 mag ( 16 shots) before making new adjustment.

Can anyone please help me figure this out because i really like both the look on my gun with the donny and that its much quieter .

Sorry for the wrong spellings -

airguns-us.com looks like a fake website

I was looking to buy air gun stuff, and this place has everything slightly cheaper than everywhere, and some are listed as $0. Also, some links take you to pyramydair.com instead. Also their social links take you to the website's registration page instead. It all seems, fishy.