Have some JSB 18.13 grain pellets for sell. All tins are sealed and in great shape.
$20 a tin, with free shipping in the lower 48
Thanks for looking

Like new huma wooden impact furniture or trade for .22 cal pellets

$150 shipped. PayPal f&f

Up for sale is my Dreampup .22cal. Great shooting and very accurate just like any FX. Selling to fund another project. Has a 600mm barrel, power plenum, Saber Tactical tube clamp, FX Barrel band and mossy oak overwatch vinyl wrap. Just completed a reseal kit 1 week ago. If your not partial to the camo stock, can change out to the stock one off my 25 cal dreampup. Its missing the thread protector at the end of the shroud. I always had a moderator on it so no biggie. Comes with 1mag and fill probe. $825 shipped in CONUS. PayPal FF or pay fees or Venmo. Call, text or PM me if you have questions 520 965 7362
Ed

View attachment 20220705_173737.jpg

View attachment 20220705_173753.jpg

View attachment 20220705_173816.jpg

SOLD to jcote258


Brand New L2 .25cal with Shorokh 350mm barrel kit and Carbon Fiber Hand Guard. Comes with 3-Magazines and 2 Magazine Holder.
Also Have a few other accessories I can include for more including a bigger carbon fiber bottle, easy peazy fill nozzle, magazine holder, and a bigger bottle for remote filling.
$2000
Call or Text for more Pics and Info
512-517-6939
Venmo or Cash App

3 shots through the Fatboy, the extension and muzzle brake were never opened or used, as received from DFL. $200 shipped CONUS. Payment by Paypal, no fees to me.

Laminate stock Vulcan 2 in .25 caliber. Currently shooting the 25 grain kings at 890. Huma reg, power plenum (not installed), four mags, mag holder, short pic rail, fill probe. Ships in factory hard case. Small scratch at the end of the shroud (shown in photo), but otherwise, very good condition. Asking $975 shipped, CONUS. Paypal only. Thanks.

I ran into an issue with my .22 RW HP with HeliBoard at RMAC. I was going to shoot my DW .25 in Speed but the gun had an issue with a broken microswitch so I had to use my RW HP instead. I found out that I could “get ahead” of the gun when shooting very fast. I’d shoot, then cock and shoot again, but nothing would happen until I pulled the trigger again. There was definite delay with the HeliBoard and Speed shooting with it seems like a non starter.
I’ve heard from others that they have the same problem. I’ve removed my HB and reinstalled the stock GCU2.0. I can go as fast as I want with it.
Anyone else run into this issue?

***NLA***Crosman Custom Shop Model 2300 with Hawke red dot, and many upgrades.
$200.00 SHIPPED

2 Hawke Scopes for one price. 4x32AO. Mil-Dot reticle. No boxes, paperwork or caps. Good shape. $80. $15 shipping. Continental U.S. only. For both.

Hello

Digital 28mm gauge with G1/8BSP threads. Reads pressure in bar. 300 Bar working max pressure.

Black cover included.

Asking $40.00 includes shipping within the CONUSA.

Buy with confidence, please check profile and feedback session.

PayPal payment Friends&Family or add 3%. Paypal only please.

Contact me via PM if interested.

Hope to get some help from fellow AGN members that have some experience with these products. I have been wanting to review these airguns since they first arrived to the states and have been met with some difficulties. Generally I charge for my work but in some cases I review products out of pocket if it's something worthy and I see may help the community. I have reached out to AEA directly in March and was told they stopped offering free guns to YouTubers and if I want to get AEA product to review to please contact dealers. Well I have reached out to several well known dealers and have been ignored by all of them, to me this is somewhat of a red flag. I will be purchasing one or several of these guns out of pocket for field review. My question is, what model would be a good fit and something people would like to see? They have so many models so I'm having a difficult time deciding. Any help is much appreciated, Cheers

Hi I am a new owner of fx maverick vp - out of the box it has been firing FX pellets (0.22 16 grain) very well at 40 yards. When using Fx Hybrid slugs (0.22 22 grain) - I got a couple stuck in the barrel and they were a bugger to get out. Is there something I need to do differently when shooting the hybrid slugs? eg more power on rear dial/rotate barrel etc?

Thanks for any help.

$1700 shipped in factory case and outer box with 1 mag, Foster fitting and Manual to lower 48 only, I prefer Zelle - if you insist on PP please add for fee.
Shoots JSB 25. and 34 gr. like a tack driver, See pics. (Note: 3rd pic is dog hairs - not scratches)

This was purchased earlier in the year by a fellow AGN member from AoA. I bought it from him a few weeks ago.

It's a beautiful rifle, but I should have gone for the bull pup version. This one is about 41.5". Very accurate and very quiet. The only mod I'm aware of is the front sling swivel stud shown in the photo which the first owner installed in order to use a bipod. Excellent condition. No dings or scratches. Comes with factory silencer, 2 factory mags, and fill probe.

Recent 20 round shot string:
JSB 15.89
Shot count: 20
Low: 861
Hi: 872
Avg: 868
Spread: 11
STD Dev: 3.2

$850 shipped. PayPal Friends & Family.
No trades at this time.

Thanks for looking.

For those of you who have or had the Vixen long what FPS in 22 were you shooting? I am shooting 860 with JSB 18's right now and it is kind of loud....A few questions for you. folks...How do you pull the barrel so I can polish it and is there a way to quiet it down? I saw a thread on Donny adaptor, but haven't seen any photos or info on how it worked.

Thanks

Tony P.

I'm switching to a synthetic stock so I no longer have a need for my wooden stock. I will take ($80) now $70 shipped to the continental US.

I'd like to conduct a poll. Please vote for your choice of the most offensive sales ad you've ever viewed in this forum's classified section.
I have a candidate in mind -- I just read it this morning. The ad comes with a disclaimer of: "Please Read Carefully".
I would never, ever consider contacting any person who wrote that in an ad.
Maybe the member will read this and edit the listing. Thus, increasing the likelihood of making a sale.

Make: ATN

Model: ThOR LT 160 3-6X

Location (city or county): Fullerton 92833, California

Price: $700 Shipped, PayPal F&F post migrated to eBay

Shipping: Will ship with either USPS Flat Rate or FedEx Ground. Photos and tracking will be provided.

Other info:

Purchased new in October 2021, this was originally on my AEA SS Plus .30 cal for night time pest control. When I upgraded to a ThOR 4, this moved over to my Challenger .357. Now that I have a regulator on my Challenger, I've been taking it out a bit more and have an X-Sight 4K 5-20x on the way. My main beef with this thermal was that it couldn't record. I assumed it would be like the X-Sight LT models which still recorded without audio, but it's really as simple as it gets. You don't have to navigate menus to change contrast, brightness, and white hot/black hot which is nice.

What's included:
Everything that came with it including the original box (this model doesn't come with the crappy ATN rings)

Edit: Photos removed

Starting an informative thread to showcase the rebuild of the mighty Bantam HR Sniper Mag. While this pcp is not as common as others and target audience may be slim, I hope to showcase the feasibility of minimal repair/rebuild procedures with this fine tool.

This has definitely become my number one go to rifle. It’s super accurate. It’s super lightweight. It packs a punch. It’s beautiful. What more can I say?

As far as Penny goes, she has developed herself in a quite a hunting dog. One of the squirrels down below I did not hit well. Penny ran it down like it was nothing, dove under a log and dug it out. Truly outstanding. Then she brings it to me with such a soft mouth that it’s still alive.

Available soon at Airgunrevisions.com
.25

Looking to sell a used AF Condor .22, just thinning out my collection a bit. Has older style safety on it but works just fine.

Asking $375 shipped Conus

Happy Independence Day from Airgun Revisions.

What is wrong with this company ?or what is right ? should be the question, sent in an airmax that started using a lot of air with each shot to their service department, because you can't actually talk to a tech so it all via email, anyway after a huge amount of confusing emails they it was fixed.
Then were going to charge me for return shipping even after I had the return label
I get it back and still dumping huge amount of air, exactly the same problem and 2 screws left out of scope mount....
I'm done with hatsans
My advice steer clear of a company like this, such crap service from hatsan.

Looking for a FX Crown Blue Laminate stock for my MKII. I'm pretty sure it will fit.
Thanks,
Jason