About 1 month ago, I purchased a muzzle mounted, chrony on Aliexpress.
Im very impressed so far!

$100 chrony, (might be $110 or $120 now as I ordered about a month ago...)
Made by Qiufeng, and sold on Aliexpress.
1/2" x 20 threads at end, so it attach's to most airguns.
Seems to have a large enough inside diameter to accomidate up to .30 caliber, but I have NOT confirmed.
Its recording very comparable speeds, that Im getting from my FX 2 Pocket chrony.
Its recharageable, and records in both FPS and MPS.
Helps keep things quieter, to a very small degree.

Cons?
With a simple conversion, I must enter the weight of a projectile in GRAMS, not GRAINS....
Thats my only complaint, and it is not a big deal....Just a simple conversion.
FX Royale, Crown, and Impact should be no problem, but attaching it to a Umarez Notos may become an issue.

Comes with a hard case, and cord.
Highly recommended, but I can no longer find a Aliexpress link.

I would like to trade my left handed walnut stock for a right handed one. Stock is in great condition. I don’t see any blems. The UIT rail showssome signs of having been set in different positions. I recently purchased this gun from another AGN member with the plan of making my own stock. Last picture is just for reference. Let me know what you have.

Hello from Australia

Been reading these forums for tips and advice since I went PCP and I got my .22 Impact M3 600mm ~ 2 years, great gun straight out of the box and I set it up to shoot rainbow lorikeet's on the vineyard(declared pest/vermin in this part of Australia that destroys grape vines and kills native birds).

Found the JSB 18gr Barracuda Hunter to work great @ ~960 fps, and after fitting a CF barrel stiffener and harmonic balancer the gun was super accurate and consistent I was never going back to the .22 LR, even though the Tikka .22 LR was so much lighter than the PCP, when I tried it again it just highlighted how accurate and consistent the Impact M3 was and the large capacity magazine really seals the deal.

So now I though I would try shoot something heavier for the rabbits and rats, so I got a STX heavy liner and some slugs, just fitting the liner and trying to shoot a 27gr + slug yielded pretty low fps even after turning the regs up to 140/120, then 160/140, I was barely getting 800fps with the 27.5 nsa .218's and 700 something with the 33gr zans. With the 23gr slugs I could get high 900...

After much reading of forums and watching YT etc it was clear I needed other upgrades !, so I ordered the slug power kit with the tungsten hammer and pin probe and Huma 2nd reg, then after more research worked out that to make the 14g hammer work I needed a lot more pressure so I ran the gun up to 180/165 and didn't really get the speed with the 33+ gr slugs, the gun was getting belted and air usage was extreme, tried the different springs and ball etc, still couldn't get heavy slugs moving and even the speed on the 23gr slugs wasn't much better with all this extra pressure !

Maybe the 14gr hammer is not right for this set-up, so I turned up a brass hammer that weights 8.35g and dropped the 2nd reg down to 140, now I was getting more consistent speeds about the same as the 14g hammer and 160+bar, gave up on the heavy slugs(wow did I go through some ammunition AND air !!) and needed to have the gun useable in the field again so focused on getting a good tune with the 23gr slugs.

I got the 23gr's going 1050 fps + with the regs dropped to 140/120, then sighted and tuned the harmonics etc until I got same speed shot after shot and good accuracy at 1040 fps.

TLDR:

How do I get at least 950fps, preferably 1050fps with a 33gr + slug in this thing !? Is my barrel too short @ 600mm ? Are these internet stories of 1000+fps 40gr .22 slugs fairy tales !?? Do I need even more extreme pressures ?

For me the ballistics of only getting 800fps out of a 33gr slug aren't good enough to bother using this gun for rabbits and rats(need projectile weight to punch through trees etc), its way sub par to a .22 lr with good ammunition doing 1050fps with a 40gr projectile.

PS : this is the late M3, already has power plenum etc std.

Hello, I am selling a very lightly used Falcon X50 FT 10-50x60 SFP scope with side wheel. The original box and all accessories are available with it. There is a little mark on the focus wheel due to the side wheel being mounted with the included screw friction type fasteners (see picture). This scope has been babied otherwise, never seen the rain, looks new.

I also have a set of FX no-limit 30mm dovetail scope rings and sportsmatch hto71 dovetail scope rings available with it if interested.

$700+ shipping for the scope, add $40 for either of the rings. PayPal

I sell under the moniker “kdpeeps86” on eBay if you would like to see general feedback selling items.

I have a bin Tac S45 that I would like to sell. It currently is NOT holding air. I haven’t shot it in several months (worked fine prior) it was just way too loud for backyard shooting. I don’t have the time or the energy to break a gun down that I have no intention of shooting. Other than that it is in excellent condition. I’ll even throw in the recommended ammo. Two mags.
$500.00 located in So Cal. Split shipping within CONTUS. PayPal f/f+3% or Zelle.

This is a very nice clear scope. Push button illustration. Completely tool less turrets. Looks like new. Rings not included. $1550 shipped

I just ordered a Gen 1 .25 marauder off airguns of arizona with a custom stock and it says also has a shorter barrel. Does anybody know what length the barrel could be?

www.rxtargetsystems.comRx Speed Silhouette lanes are on sale 15% off regular price. No coupon code needed while supplies last. The 1:10 scale Target figures are AR 500 steel, providing high quality rugged durability. My goal is to have Rx Target Systems as the standard for Airgun Speed Silhouette in 1:10 scale. Who else wants to see this happen?

Right handed FX GRS Nordic Grey stock. New take off. I replaced it with a Lefty .

450 split shipping CONUS
PP F&F or other agreed method.

Just add your scope and head out hunting!
This gun has less than a tin of rounds through it. It was shot from the bench only.
Comes with one magazine and the original hard case.

.25 cal 380mm
Over $800.00 in extras.
Front bottle adapter
Second bottle with FX valve
Saber Tactical top rail
Saber Tactical Arca bottom rail
Saber Tactical bag rider

1600 to your door CONUS only or trade for Huben K1 current revision.
PayPal FF or other agreed method.

Lots of positive feedback.





33.95's at a mid-power tune.

10 Meter target at 25 yards.


25.39's at a mid-power tune.


10 Meter target at 25 yards.

I have a DRS pro I’m looking to trade for a panthera 700 in either .22 or .25. Rifle has only been taken out a couple times.

Of late I've become frustrated with "MY" lack of understanding using strelock pro or airgun elite.
So to create the best dope for the best chance of accuracy I have created my cavedweller methodology which i do after having confirmed and set my ZERO.
I create and validate dope by using a 5”x7” 1/8” or larger graph card stock, i even have some 11"x14" 1/8" graph paper which works just as well.

I draw a horizontal line across it the top of the paper an inch down and add vertical tick marks at 1” apart.

On a zero wind day shooting from a bench I do the following:

Beginning at 10 yards, I place graph card level and from a benchrest on a zero wind day, I put my bullseye on first points of intersecting tick and line and shoot.

I then carefully access my poi and annotate holdover.

I then put that holdover point on the first poi hole and shoot - in a perfect world the pellet will be hole on hole.

I repeat this from 10 to 60 yards moving 1/2 yard at a time from 10-22 yards then in 1 yard increments thereafter.

Lots of movement and exercise but the DOPE is SOLID!

Whew!

Added benefit is I am also double checking my ranging for accuracy at the same time.

It's the 1st time I saw that someone has already worked on a RAW in such a bad manner that even the regulator piston is destroyed and many important parts ruined.

I just recently picked a couple of these up at a shoot here in Utah. I have to say it’s the most ingenious idea I’ve seen in a long time for us Air gunners. Often times at these shoots I’ve seen many people have problems related to dirt in their air source. So when I saw Fred ‘s part, I got super excited to get involved. At first Fred only had plans for one or two just for his tanks. I strongly urged him to consider making more and selling them. A couple of months later Fred shows up at the shoot here in Utah, and he’s got a bag full of Fred’s Clean Whips. They’re beautifully made stainless steel, whip clip plug.
I’m mounted mine on the handle of my saber tactical bag a place where I could easily see where the end of the hose is. Also knowing it’s free from dirt and clean. And it wasn’t dragging in the dirt.
I happen to know Fred spends lots of time here on Airgun nation. I think his call is “Lloyd”.




A bid shout out to Fred (aka Lloyd)!
Thanks Mont

So I'm looking to get a alpha,delta, or red wolf what one do you got and what one should I get?

Hey guys,

Due to a family emergency I think it’s best I try to sell my collection for now. It’s all like new in mint condition.
I started purchasing in March of this year, a lot of what you see has never even been used. I had to work 70-80 hour weeks to buy the items and range is an hour drive so I only fired the guns on 3 different occasions.
The gxcs4 has never even been turned on yet I just finished installing an hour meter on it to keep track of ru time for maintenance reasons.
Family medical situation has taken a turn for the worse an I have to prioritize my circumstances at the moment as reliably getting back and for to work and my own place are my issues at hand. Please call 3527403952 for any inquiries. Just quick numbers I’d think 3,500 would be fair.
I’m willing to mark everything 30% off what I purchased it for if anyone is interested. Thanks for looking guys.

In this age of fancy Airguns the Talon P .25 has managed to wow me. She’s a light weight ,pretty compact, single shot rifle producing 45 foot pounds with the Hades pellets. She’s capable of a lot more power. The chances of a leak are almost none because she has 4 o rings. The chance of poi shift is 0 because the barrel sits inside the gun and is held in place by grub screws so no bumping can set it off. She has lifetime warranty and is US made with the exception of the LW German barrel. The trigger is great and the only thing to adjust is the shoe. The caliber can be swapped for less than $200. There’s only one adjustment and that’s the power wheel. You don’t want to crank on it you’ll just waste air. Without a moderator she’s loud so I leave the can on all the time. She’s got a bell curve to her shot string because she’s not regulated but that’s the beauty of it . If it doesn’t have a regulator it can’t fail, I found she likes being filled to 2500-2000 and she’ll give you 10 consistent shots . I’m talking less than 24 foot spread. I can stretch it by filling to 2600 and stopping at 1800 but the ES increases but at 35 yards it’s in the same hole. 10 shots doesn’t sound like much but believe me when you add the time for reloads it’s a lot of shots especially for hunting. This is my most reliable gun. I had sold it but bought it back (thank you). I’ve owned it probably 5 years with 0 issues. It’s a look only a mother would love but honestly I don’t mind. I had a Condor SS .25 and Talon SS. I don’t mind they got sold but I’m glad this one is back,

Selling a fx wildcat 500mm BT Compact in .25 caliber
Comes with Fx slug power kit installed and it has a superior heavy liner installed.
hydro dip stock
Comes with 1 magazine and fx case
Currently loves to chew on the 34 grain jsb mk2 pellets around 900 fps, but obviously can shoot slugs if desired..
Asking 1200 shipped PayPal ff
Moderator is not included in the auction , only the items listed in this post..
Original purchase date 3/10/2023

Anyone else enjoying this series by American Airgunner?

Selling an immaculate Daystate Delta Wolf HP (with Ultra Valve) with BOTH 22 & 177 full barrel kits! Not only that, you have almost every accessory to make it fit you like a glove! SCOPE NOT INCLUDED, but everything else is.

Asking $2,300 shipped. Priced low for a quick sale, as I have too many rifles and just looking to recoup some money. Daystate just increased their prices, so I will lower mine.

I prefer PayPal F&F, BUT I also accept other payment options. I have excellent feedback here from many years, so payment options can depend on your history here as well. I am happy to have a phone call or FaceTime so you can see me and the rifle in hand. Or can send additional pics if needed. This is the only website this ad will be posted on.

Included:

• Delta Wolf HP 22 cal. with Ultra Valve 23” with 1x 22 magazine
• 23" 177 barrel kit complete with chronograph, probe and 1x 177 magazine
• PRS Arca rail
• PRS Butt plate
• PRS Cheek riser
• PRS bag rider
• Daystate Programmer
• Case with original receipts from AoA, manual, Allen key, orings, foster extended adapter, factory buttpad, factory trigger guard, etc.

You know that is the best deal you will find especially now that Daystate has increased prices on everything (over $4600 new). (Rifle $2825, Ultra Valve $150, barrel kit $835, magazine $125, ARCA rail $222, Butt plate $159, Cheek riser $119, Programmer $158).

I would prefer to sell to one person for a great deal, but if nobody wants the full package, I can consider breaking it up. Your deal won’t be near as good broken up however.

It's only a month old selling because I got the thermal version of this scope so don't need this one anymore. Comes With the receipt, in case you need warranty also comes with one battery And a charger.
This is the night vision with rangefinder, not the cheaper scope
$600 Paypal only I prefer friends and family.

I make these as a retired hobbyist (wildlife biologist). They are designed for rifle maintenance, adjustments, and display. Features:

• Solid wood
• Extremely adjustable
• Heavy leather padding
• Hand-made , double rail sliding wooden butt support screw
• Sliding grip support
• Joints are combination of dowels, large screws, and wood glue
• 24x9x8
• Finished with multiple coats of Tung Oil

I ship quick and secure. I've bought and sold many times here on AGN.


Walnut cradle with Taipan Veteran 2 Standard .25 700mm


Oak - $125 Includes Shipping



Lighter Finished Oak - $125 Includes Shipping


Walnut - 2" Thick - 100% Dowel Joinery - $150 includes Shipping

1st love the JTS 18 gr shooting 800 FPS, But I am not shooting anything with my pistols but snakes, One or two foot shot depending on how big the snake is.. So I lower the power and want a lighter pellet, Warning do not shoot JBS 15 gr pellets it will jam,,, So I slower the power 480 FPS and started shooting Predator GTO 11.75 gr pellets Pellets fit good no jams and I can go through three or four magazines with one fill, That makes for some fun shooting and thats what its all about with this gun fun,,But and its a big but, The GTO pellets are expensive , Just for fun I shot a 2x2 1/2 inch board at 38 yards about 40 shots,, walked down looked at my free hand group wow, Impressed, But there was about 40 pellets on the ground, They looked perfect like I could shoot them again,, I like my gun to much to try stupid stuff, LOL.
OK OK just my FYI,, been some talk about the Hubens being unsafe,, All guns are loaded, And that's the way I treat them ,, I do not care if you unloaded the gun and hand it to me , ITS LOADED and ready to fire,, I have guns that do not have safeties' I make sure ones not in the chamber unless I am going to shoot, But I treat the gun no matter what that it is loaded, Just a little common since, Yes here in Texas I carry 24/7 a 9mm one in the chamber and 16 in the magazine . Sometimes open and sometimes concealed
oops my question any tight fiten 15 gr or below pellets for the huben 22 caliber pistol????
Mike

Me talking to someone that may be LEO
I shoot rattlesnakes on the side of the road (back roads) , He says you can not shoot on the side of the road,, I say you can not discharge a firearm on the road,, I have a pellet gun!!
He says anything that shoots is illegal, I say you can not call a pellet gun a firearm it will not stand up in court, He say after 5 to 10 thousand dollars the judge will dismiss,, I say well wont cost me a thing I will not hire a lawyer .. He says you will have a long time in jail until your court date to dismiss ,,,
It was a losing battle all the way around telling him air guns are not firearms ,,
When he seen my Crickets,Hubens, Prophets,Mutants,and AGT's He raised his eyebrow,
He said daisy has come a long way, LOL.