I got this moderator as I liked that I could use it for multiple calibers. Decided to buy from Donny the extender tube and muzzle break for added stability and sound deadening. Actually never ended up using it, so I can't say how well it works good or bad. I do not, for my personal preference, like the look of it on my rifle. But everyone is different. I am looking to sell it and replace it. Selling for a cheap price for the complete package. $170 PayPal FF, shipped/insured lower 48. Thanks for checking out my ad!

SOLD

Please Read the Listing Carefully

To Start, this was just purchased New on 7/10/2022 from Ken over at SPAW

So when i say New condition it means New condition

There are ZERO issues with the gun, the Only reason i am selling this is i am getting away from bullpup style guns and going to all traditional style

I do NOT have to sell this and i will not give it away, it is priced More than fair as listed

Here is what is included:

1 x M3 Compact .177 Power Block Edition Gun in Black
1 x DFL FX Moderator, Not the Hollow Tube Version , the FX with Internals
1 x Saber Tactical TRS 500mm Rail System
1 x Saber Tactical Arca Lower Rail for Compact
1 x Hogue AR-15 Rubber Grip
1 x Custom Bag Rider Butt Plate
1 x Custom Ambidextrous Cheek Rest
1 x Stud Mag Loader Kit, 4- pellet loaders, 1- pellet separator
2 x 38 Round Mags
1 x FX Factory, Molded Hard Case
All Factory Paperwork, Decal, and Misc. Pieces
All Factory Pull off parts

The gun is currently set up on 8.44gr pellets @ 910-915 FPS
Getting 5 plus mags at those settings

There is Plenty of room to go more power and heavier if desired, i didn't need it to be a fire breather, i just shoot paper.

If you were to buy this today as listed from Any dealer you would pay $ 2979.00, that's what I have in it Plus all the shipping

I am asking $ 1975.00 shipped within the Lower 48

Scope, Scope Mount, and Bipod Not included

Payment via Paypal FF or add 3% for Goods and Services
I can do CC over the phone as well

Gun will ship UPS, Insured, Signature Required

No Trades

Contact Via PM here on AGN, This Is ONLY Listed here on AGN

I just built this up last evening. It’s built around a 4x8 sheet of 3/4” plywood. I bought some 4x4 posts and some 8’ 2x4s and took my chainsaw and cordless impact out to my shooting lane and had at it. It’s nothing fancy but it’s solid and level and will accommodate two people easily and three can use it if needed. The top is fastened with a few screws. If it rots out it won’t be hard to change.

Well I wanted to try an Element scope and it’s amazing. I also wanted to take another shot at FFP reticle and see what 34mm tubes do optically. I can say the Element Titan more than lives up to its reputation imho, I just cannot adapt to FFP after decades of SFP..silly me I know. I traded this for NV and went smooth as glass. I just made a poor choice I can learn from (FFP) includes Eagle Vision ISP 34mm mounts and side wheel. I also have a used Tactacam5.0FTS complete setup I can add T/S ($300)
Want to trade for a FX DreamLite bottle, WildCat or maybe a Nomad2 LN even but open to offers.
I have an .30 WAR Flex w cobra/Cothran setup, 30 Evanix Sniper2K bottle I’d trade also and can be bundled if wanted for the right item…**357 RAW preAF +165ftlbs HM1000x w mags wanted!!
Thank you.

Keahi

I recently had an o-ring for a foster fitting fail -- in the female 1/8" BSPP fitting in the image below.


I did some searching on the forum and all the advice was for buna-n AS568-10 o-rings.

But I have some of those, and they're far from what I need. My o-rings need to be 3/32" thick, but the -10 o-rings are 1/16" thick.

So I ordered some -105 and -106's. Probably both of them will do the job but hopefully I'll discover what the proper o-ring size is for my foster fittings.

Hi all,

I joined this site from a recommendation. Was told I could get more information and possibly sell.
Unfortunately, I need to post a bunch in order to get access to the classifieds.

I've got 3 Feinwerkbau rifles that I was given when my younger brother passed. He won some
Texas State championship of some kind. Was an avid airgun enthusiast.

I've got a Model 300 S, GmbH, and a 601
Would like information about their value.


Thanks ;o)
David



*This is a thread requesting information only. Any public mentions of buying or selling will receive a warning* -Moderator

3 unopened tins JSB Baracuda Match 21.14gr
1 opened tin H&N FTT 14.66 gr
1 opened tin H&N Baracuda 15.89
1 opened tin JSB 13.43

The opened tins were used to determine my Steyr Pro X didn’t like them. No more than 4 10 round magazines out of each tin.
$60 shipped in small flat rate box.

Will also trade for an equivalent amount of JSB Jumbo Express 14.35s.
And if you have more of the 14.35s will pay for the additional.

Through the years I have subscribed and watched quite a few different Airgun related YouTube channels and just thought this one might be fit to share on Airgun Nation. A long time subscriber to my friend Drews other channel, "The Lone Shooter" that's focus is on camera gear and videography has recently had an accident that put him in the hospital. Without giving to much personal detail, he hit his head pretty bad and could have easily died. After months of recovery and not being as active as he was, he started a new channel " The Weaponized Hippie" lol This man has a very unique perspective on Airguns and some of the most beautiful storytelling and production values I can envy over. I expect to see big things from Drew and just thought he could use some support and encouragement to move forward with his amazing work. Here is his recent video where he discusses getting started in Rat hunting. Cheers, Dana

Less than a half hour drive away!
Found this 86/87 Santa Rosa Beeman 77k in .22 with the 25mm compression tube!
Original piston seal was shot and hard as a rock. Honed the compression tube installed a JM hornet kit with a brass top hat and a Vortek moly piston seal. Cleaned up and adjusted the trigger and replaced the smashed breach seal too... she's breaking in nicely and shooting H&N FTT 5.53s at 667 average!
Came with the original Goudy style stock and a HW97 stock which its wearing now!
The factory stock needs a little attention!
Dusted a few sparrows at the farm this afternoon out to 40 yards! She's a shooter and getting better with every trigger pull.
And came with the 4-12x40 Japan Bushnell trophy!

Ok how the heck does a gun grip get a name like “hamster”?

Ideal Air Gun Scope.Single piece 30mm tube. Includes 4 inch sunshade, 4 inch side wheel,and flip up lens caps. Duel colored Illuminated retical, (red and green). Locking 1/4 MOA target turrets, easily resettable to zeroLocking fast focus eyepiece Fully multi-coated optics improve light transmission. Highly durable - waterproof, shock proof, and fog proof.Side focus system adjusts parallax from 10 yards to infinity. $300.00, shipped to the lower 48. PayPal or postal money order.

View attachment 278764

View attachment 278765

View attachment 278766

View attachment 278767

View attachment 278768

View attachment 278769

OK, on 6-30-2022 I bought an FX Impact Compact in .25. This has the 500 mm barrel. On 7-11-2022 I bought Element Optics Helix 6-24X50 SFP, APR-1C MRAD reticle. Just to be clear I am ecstatic with this gun. I also purchased a DonnyFL FATBOY moderator. In the past I have had a Cricket, Vulcan, FX Wildcat, Edgun Leshiy classic and until recently an Edgun Leshiy 2. Can’t say a lot bad about any of them but there was always something that bothered me and I kept searching. I did not want the FX Impact because it looked like a large monstrosity with way to much tuning. I admit my mistakes and this was one. The FX Impact Compact .25 is not overly large or heavy and when it arrived I was shocked at how small it was compared to my thoughts. So I started to do some reading and settings and adjustments and started with the 95% tune although I did change it a bit. Now for the obligatory stats. Settings are as follows


Front Valve is 4 ½ turns out (and that is the maximum mine will physically turn out)
1st Reg 150Bar which came from factory
2nd reg 100Bar ( I adjusted with ball end Allen key very easy
Macro set at 16
Micro set at 3
JSB Exact 25.39 Pellets
880 FPS for 43.7 Ft. Lbs


Changing just the Macro and Micro
My current settings for accuracy and sound
Are as follows.
1st reg 150 bar
2nd reg 100 bar
Front valve 4 ½ turns out
Macro @ 8
Micro @ 2.25
JSB Exact 25.39 Pellets
816 FPS for 37.5 Ft. Lbs.
At this setting I get 100+ shots
300 cc tank filled to 245 Bar and shot down to 115 Bar.

Now just some notes of issues I ran across.


My front valve adjusting knob has 4 lines and that’s it. I have read where adjustments have been made out to 6+ but that was confusing to me because a turn is not from one line to the next and so I would think the numbers should be 4 lines + X amount of turns. At any rate MY gun will physically screw out 4 lines and ½ turn before the knob is stopped by the back end of the shroud.

Now I read where the pellets like speeds closer to 900 FPS. I do a lot of backyards subdivision shooting and my settings are great for 25 to 35 yards. Can’t question the accuracy. Also just by changing Macro and Micro I am 880 fps and near 44 ft lbs. I think some of our sub 12 ft lbs friends would be happy at those settings.

I have about a half dozen airguns. I enjoy both precision shooting and plinking cans while camping. One of my pistols is a decent quality CO2 and a break barrel pellet guns that are fairly accurate and fun to shoot. The blowback semi-autos I use for can plinking loose a little of their joy from the clunkiness. I recently bought two replicas one of the Beretta PX4 and the CZ 75 P-07, they are fun but clunky. The CZ locks back with last shot and the PX4 has a dual action trigger which is nice but the triggers are really awkward.

Does anyone make a semi-auto that would shoot accurately with a smooth trigger like a quality firearm?

Note to add, I would also consider a revolver style pistol if there is one with a smooth action.

about gun they wish they would come back? i just wanted to show some of the young bucks what air guns used to look like ?and they were comon.Their is no plastic or press wood checking.This was hand cut.im just to old to rap my head abs and all the du das hanging off the barrel.This is one for a illustration .BSA Gold Star10 shot mag.This was a restricted model ,you took out the 3 or 4 plactic o rings and put a longer spring and it would push a 14.5 grain pellet at about 750 fps. and 30pd cocking force. i think the rifle is about 25 years old?

I sold some .357 pellets days ago, already shipped.. Some dung beetle copied my original ad posted it on american airguns classified ads....
Eddie David
[email protected]
2132593737
and is trying to scam someone selling air. I posted and ad about it..sheesh.. I'm in no mood right now.. got the thing and it's rough.

Just a quickie with my taipan after work, grabbed it, loaded it, shot it.

If you could like and subscribe that would be awesome

DREAMLINE LITE 25CAL, Upgraded valve seat, power plenum, New Orings, LDC, HD Barrel Band, One mag. Sold without scope and rings $750 shipped CONUS. Thanks for Looking! 847 315 0704 Text or call

Sold to tdhouser1964

Practically brand new Ninja Air Gun EZ PCP Fill Station w/ 90 ci Tank. With case. $250 shipped in the US
Venmo or Cashapp
Call or Text 512-517-6939

Selling my AEA Element .22 , up graded butt stock , Donny FL moderator adapter , 380cc regulated air tube also comes with the original 300cc tube and two metal mags . Gun shoots and looks like new no dings or scratches . shooting 18g JSB's at around 930 fps . four mags per fill at 25 psi . scope and moderator not included
Asking $800 shipped OBO..Will accept pay Pal FF. email me at [email protected] . or call 8048884012 .

Thanks .

I've bought these
(200 bar)

and (300 bar)


And these are for plug'n'play with painball or hardball equipment that plugs directly into a regulator on the gun...
Can I do something here? Adapters, new valves, anything?
Thanks.

Don't kno what I was thinking, disregard