Looking at the offerings in .20 caliber, it seems only special order rifles & limited supplies of pellets, is this caliber dying?
I know there are a number of fans of the .20 caliber but does it have the continued support of the gun & ammuntion manufactures?

I way too much stuff so I'm doing a little house keeping! All items are in excellent condition and are priced for a quick sale! Please indicate item number when inquiring and I will email or texts pics if interested! Prefer to deal via text for quicker responses!

1. Carbon fiber bottle - 420cc - bottle has a M18x1.5 thread - manufacture date Jan 2022 - like new. Tried on my Leshiy 2 but was a little too long - $125 NLA
2. UUQ Bipods - $60 shipped each-SOLD
3. RTI Priest Pump Action Accessory - $50 shipped - SOLD


PayPal gift or add 3%! Serious Buyers ONLY Please! I have tons of positive feedback, so should you! Thanks for looking!

Text or email for additional information or pics!

Email: [email protected]
Text: 312-498-9987

I've got a Riton X-1 Conquer and a Cabela's Covenant 4 4-16x44 scope. Both are SFP. I have the box for both

Both scopes are in great condition without marks of issues. I have linked the descriptions below. While not 100% certain I believe the Cabela's Covenant Tactical scopes are made the same place as the Vortex Diamondbacks. If you search I think you will come to the same conclusion.

I am looking for a lightweight scope in the 3-12 power range. It can NOT have a duplex reticle (or single aiming point) this is my only criteria.
I am also looking for a small moderator 1/2-20 for an under 20fpe .22 caliber rifle.

I will sell either of the scopes for $150 plus whatever shipping is from 21009. PP F&F or Venmo or Money Order please.

I also have a LW .30 barrel from an RTI Priest and 2 .30 Priest mags if anyone is interested in those. SOLD

A few times over the last couple of weeks, I have gone out into my backyard to find my birdfeeders lying on the ground, having been lifted off their hooks and dropped, and sometimes dragged off. In my yard, I have seen squirrels, rats, crows, stellar jays, and the occasional raccoon. While the fact that they are lifted up off of hooks and dropped suggests something larger, like a raccoon, that's the one I see the least of all the critters. While I am sure that the crows, rats, and squirrels are likely smart enough to figure something out, I am not sure they are strong enough to lift tube feeders. Who's your money on? Whoever it is, I'd like to start discouraging their presence at my feeders.
Thanks,
Chris

My new Wolverine R standard in .177 with a 0DB moderator, Atlas bipod and Sightron SIII Field Target 10-50x60 scope. Got this to give field target a try.

Hello AGN,

I'm looking to sell a very nice 600mm 0.22 caliber FX Impact MkII Bronze w/ 1 magazine, shroud thread protector, some nice M3 upgrades and factory FX hard case. This Impact is an excellent shooter and is currently set up to shoot the JSB 18.13g pellets through the 600mm Superior liner at ~900fps with excellent accuracy. Rifle is in excellent condition as shown in the photos; it holds air and functions perfectly. The shroud has been carefully wrapped with a carbon fiber vinyl wrap that can be easily removed if you don't want it.

[This rifle currently has the standard 480cc bottle on it but I do have the smaller 300cc bottle if you prefer a more compact/lighter setup.]

This is a MkII that comes with the following upgrades / extras:

• FX Impact M3 600mm Barrel w/ Superior Liner & Dual Transfer Port (Pellet or Slug)
• FX Impact M3 Ambidextrous Cocking Block
• FX Impact M3 Oversized Cocking Handle
• FX Impact M3 20 MOA Scope Rail
• FX Impact M3 16 Position Power Wheel
• FX Impact M3 Skeletonized Buttpad
• Stainless steel bolt kit (already installed)
• Bottle/barrel band

Price is $1500 + 1/2 actual shipping

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I haven't been very active lately but have been on this forum for a long time and have abundant feedback as both a seller & buyer so know that you're dealing with a reputable trader.

Hello AGN:

I have several extra moderators / LDC's that I no longer use and am looking to sell:

• Huma Modular Air Mod40-4/0 (4 sections total) Standard 0.30/0.25 Caliber Moderator w/ M14x1.25 Threads (will thread directly onto a Leshiy2 barrel); CF vinyl wrap can be easily removed if you don't want it: $125 shipped NLA
• DonnyFL Tanto 0.25/0.22 LDC w/ 1/2 UNFx20 threads: $80 shipped [SOLD]
• DonnyFL Tatsu 0.25/0.22 LDC w/ 1/2 UNFx20 threads: $100 shipped [SOLD]

I've got plenty of references here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

Minty and boxed. I dont know much about these but my buddy won’t let me sell it to anyone but him and I don’t know how to delete this altogether . So feel free to tell me about it. I am somewhat familiar with the 801 and don’t see too much of a difference besides the interchangeable barrels.

Watching an old TV show last night.

First guy - "How many guns do you have ?"
Second guy - "About ten."
First guy - "Do you have the serial numbers written down anywhere ?"
Second guy - "Yes, I do ."

I don't have the serial numbers of my air guns, written anywhere. Photos of all of them, Some photos show the serial numbers, but no details written on paper.
Do any of you keep written, recorded info on your air guns ?

I did when I had firearms, but "so far" not the air guns.
Maybe it might not be a bad idea !?

Mike

Today’s clients, they came for the unbeatable prices, they stayed for the phenomenal Customer Service. Taipan Vet, serving up the 16gr .22 Hades at an easy going 22fpe. All three at about 28 yards from my bench.

Hi all,

I bought this new in the mid 90's and set it up as you see in the photos. It's a great shooter and has helped keep the varmints at bay. I also have the soft case that came with it and might have a manual somewhere.

My question is can anyone give me an idea as to its value? And also where might be a good place to sell it?

It has been well used and well cared for and is still sending .20 cal pellets downrange with authority. I am trying to get in touch with ANYONE at Beeman in Huntington Beach about getting a tune up but just leaving a voicemail is a challenge, and I have yet to hear back.

Thanks!

So what is the obsession with Red Loctite on Airguns. LOL Really???? It's an Air Gun

I own machine guns(M16, M11, MP5's etc) and suppressors and don't red loctite anything ever guns don't need red loctite not even SMG's (Sub Machine Guns) I have used FLEXBAR ROCKSETT to mount a QD Mount that I know I'm not ever taking off. That's a different purpose.

So I get some airguns from FX have about five now with the Donny FL cans and they freggen red locktite the cans on. What idiots.

AOA did this to my LCS SK-19 once and I called and chewed them out. I don't use that ugly stock can that comes on the LCS SK-19 now I have to get my torch to remove it. LOL

If they want to loctite stuff on stick with Blue...

Sorry Rant over. LOL

I have my Alpha Wolf mounted on a tripod using a pic to Arca adapter. What I find is that when I am aiming it seems to bounce around a little bit. My thought is that the wood stock has a little bit of give on the part extending out under the tank creating a bit of springiness.

What I am thinking is to remove the stock, install a grip and a K&L Extended Trigger Guard with the ARCA rail.

Does anyone have this setup with the Delta or Alpha Wolf? Is it really steady or does the K&L rail have some give to it as well?

Regarding the grip - is it a standard AR grip? Regular top or flat top grip?

I've never been happy about the charging process for the Red Wolf. I hate disconnecting the flimsy little connector each time. I'm also not thrilled with the battery configuration itself.
My particular gun had a GCU 1 in it and when I upgraded to the Heliboard I was able to move up to a 11.1v battery from the factory 7.4.v. I found a round 11.1v battery that was just exactly the proper diameter and length to fit the cavity in the stock. The new battery also has a 2000mah capacity which is double the factory unit.

Next I turned my attention to the connection. I chose to install a small 4 pole magnetic connection. It is now flush mounted on the bottom of the plastic grip allowing the gun to be charged with an external connector, never again needing to open the compartment or fiddle with the small feeble connector. I made a short adapter to fit the factory charger and all is well.

The battery and short cables were all found on amazon. The magnetic connections were on Alibaba, but can probably be found at a local electronics store if you have one handy.

So this is a ground squirrel that I have been calling SquirrelZilla for a few months now. He lives in my neighbors yard and never comes into mine, so I just leave him alone. Doesn't look like much in the pics because I took them at 35 yards with my phone but trust me, this squirrel has to be close to 10lbs. He's literally twice the size of the one I posted pics of last week and even that one was pretty good size and this guy dwarfs that one.
If he moves into my yard I may not shoot him because I kind of like him and respect him. He's old and big and idk, I guess he'd have to start tearing stuff up real bad. But it's almost like he knows he's safe as long as he doesn't come into my yard. I watch him out of my scope everyday and he just stands tall watching me back lol.

Recently I heard an interview with a maternity ward nurse. Where she said that most of the time when the babies “are” cute. They say “what a cute baby”. But when the babies “aren’t” cute? They say “oh, she/he looks just like you!” (the parents). This made me chuckle, well really LOL. I don’t know anyone who would call a baby ugly to a parents face. In the context of airguns we know what can happen if you even mildly criticized someone’s rig. Or don’t like some attribute and voice it. Some shooters take personal offense, like you called their babies ugly. And it might start a negative “back and forth”. But rigs aren’t babies and we ought to be able to say if we find a rig or gun to be unappealing for whatever reasons. Most shooters will adapt somewhat to “their” chosen platforms. So in the end, for me, as it applies to PCPs? All personal preferences are valid, even those based on a perception.

How did you get your .30cal to be "backyard quiet"?

I really would like to know what I can expect from a .30cal noisewise — so far I only meddled with .177 and .22 (call me peashooter, I deserve it).


Would you be so kind to share with me the details that got your .30cal gun to be "backyard quiet"?

Note, I don't mean "Marauder quiet" or "mousefart quiet". Just "backyard quiet".



Yes, I know, this is maddeningly subjective... — but what else do I have to go by (where I live I know of no-one that owns a .30cal).

To understand you correctly, I'd need a few specs from your .30cal "backyard quiet" setup, if you don't mind.
(You see,
▪ if you got your gun quiet shooting a 25gr at 500fps from a 700mm barrel with a DonnyFL Emperor —
well, that's quite different story than
▪ if you got it to shoot quietly a 34gr at 800fps from a 500mm barrel without silencer.)


•Gun =
•Pellet =
•Muzzle velocity =
•Silencer (if yes, which?) =
•Barrel length (if you know it) =


Thanks a lot for your help, you enablers...!

Matthias

Just thought I would post up a cpl pics of a Sheridan, Silver Streak for any of you Sheridan fans.
I acquired this from the wife of a friend of mine that pasted away a few months back.
I remember this rifle sitting in the shop for the last 20yrs just collecting dust (while we shot his 392) since it didn't work.
Once I picked it up, figured out what it was, I had to see if I could rebuild it.
Near as I can figure, its a 1954-1957 Sheridan Silver Streak that is actually in very good condition.
I ended up converting to an adjustable pump rod, machined a new multi ported exhaust valve and replaced the typical worn parts.
I think the only thing it is missing is the pad that snaps onto the top of the barrel to grab when pumping up (if these early ones even came with them).
It now pumps up, holds air and shoots really well with the few old Sheridan pellets I found. It turned out so well I ended up refinishing the stock set as well.
Anyways, hope you enjoy

Maverick VP .25

What are the recommendations for keeping a gun cocked?
Sometimes while waiting for game I will have the gun cocked. Not sure the length of time has any affect on the air / accuracy / rings /etc. advice?

I just acquired this tank and was wondering what I need to get it up and running. Not sure how to fill.
Thanks for looking
Matt

I'm not only new to hunting, or more accurately pesting, I'm new to guns in general.

Been blasting lead at my 50 yard target as fast as I can. I have a great space where I can set up targets at a variety of distances from say 10 to 75 yards.

...I got me a nuisance which I'm motivated to eliminate. Ready to trudge right out there and set up for the night. But, it occurs to me I ain't got the foggiest clue about shooting a target at a distance I'm not "set up" to shoot at.

What are some good strategies, tips, and considerations for going after live game at night? Particularly in regards to using a regular scope and a red/green light. (I don't have night vision.)

This particular nuisance will likely be < 30 yard shot, in bushes, and in and around water. Follow up shots are unlikely.


Thanks in advance!

Hello AGN:

I have like new with original box Kraford & Lypt FX Impact Gen3 ARCA-SWISS Extended Trigger Guard in Black w/ Spring-Loaded Cap & Removable Picatinny Rail Section. These rails are $165.95 from the K&L site and sell for $159.99 on most other sites (when in stock). Price here is $125 shipped.

I've got plenty of references here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

I have a very clean and great shooting Evanix RS 3D 357/9mm with upgraded pistol grip and front tactical grip with a Wolf Moderator to help quiten it down, comes with a fill probe with foster fitting, 2 mags and extra valve block. Nothing wrong with it just need to sale some stuff, scope and mount not included. Asking $850 shipped and insured...Thanks Terry.

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price via UPS Ground. Please allow up to 48 hours for shipping.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

I have two nice pistols for sale.

1 - Air Arms Alfa Proj .177 10m pistol. I purchased this from Matt @brawler1588 when he was clearing them out from his gun club. Great shooting little pistol but my hands are too big for the grip. Includes fill adapter and all accessories.

Price: $450 $425 SOLD






***************************************************************************************************************************************************************

2 - Evanix AR6 .22 Pistol. ~25fpe. One of the most powerful pistols out there. Includes a Neil Clague (sp?) slide on moderator which helps nicely with the report. Included are 5 magazines, manual, o-rings and a spare parts AR6 pistol. Holds air with no issues. Stocks were oiled and look really nice.

Price: $400 SOLD

I have a clean and great shooting Evanix Rex 45 250bar fill, 16" barrel and fill probe but no foster fill as pictured or sling point sling attachment, the latch on the cocking lever to keep it from closing and looks to be wrapped in hockey tape nothing wrong with it just need to sale some stuff. Asking $625 shipped and insured..