I am selling my accutac bipod. Mounts on a picatinny rail. Asking $225 shipped to conus. Text 307-630-6531

I just got this from AR and it comes with the buckrail moderator. It shoots great but just too long for me. It had maybe 100 pellets through it. 250 plus shipping. No trades please I am reducing my PCPs to only a couple.

Thanks
Jon

I set my cuff trap up the other night since my bird feeders were raided again. I figured another coon found it's way into the yard. They're getting smart. They'll eat the bait around the trap but not reach in and get cuffed.

Well, this poor bastard decided he wanted some marshmallows. I tried to free him, but he was less than pleasant to deal with, so I got the 25 jumbo out and sent him to the good lord.





Doesn't get any deader than that shot.

Hello everyone,
I've recently acquired an Aselkon Ravello RX5 air rifle in 5.5 calibre from a gunsmith here in Morocco, but he doesn’t seem very familiar with this model. I noticed there was an excess of oil inside, and the rifle loses air after a few hours. After disassembling it, it appears the issue is due to a faulty O-ring that hisses, rather like a punctured tyre.

Being based in Morocco, I’m limited to ordering replacement parts online. If anyone could kindly point me to a website where I could purchase suitable O-rings and, if possible, an optional regulator, I’d be most grateful.

Many thanks in advance for any help and advice!

After running through 7-8 tins of pellets. I've discovered my barrel really likes pellets that are .257-.259" in diameter. Anything above and below that accuracy falls off the rails. I looked online for a pellet resizing die and the only thing that keeps popping up are gauges to measure pellets. I know I can get Hornady to spin me a resizing die but is there someone in the pellet industry that has already cornered this market?

I figured since crosman is possibly going the way of the , and parts are already getting hard to find for this beloved platform, I decided to go all out one last time.

I parted out my 357 Mrod a couple weeks ago and kept the parts that would carry over to the 22xx guns. The boyds stock, bottle, trigger, and scope all were harvested.

Started with a 2300 tube since it's not roll stamped and can withstand 3k psi with the right valve screws. I installed a magnum airpower discovery valve along with his 180k screws and drop block. Tossed in a polymer core hammer also from Bill @ Magnum.

I wanted a mag fed setup and side lever, but the only one I could find was the one from the maker in Russia. He only had a 30 cal breech left so I said what the heck, and snatched it up.

Then I needed a barrel with a 15mm OD. I bought a 30 cal Kral big horn barrel and cut it down to 12", made a shroud and modified a moderator to fit inside and also vent into the shroud.

Almost complete, just needs some touchs on the bluing and final shape of the front of the stock, but she's up and running. Stacking 50 grain JSBs at 20 feet so far. Not far, but I wanted to see if it was clipping or not.

Not the most powerful, but still giving me 24 shots on the regulator (2400 psi) and roughly 635fps/45 fpe. The cool part, it's quiet enough for backyard shooting and it's only 36" OAL. The weight is balanced pretty center, maybe a fudge to the rear which is better than forward.

Hopefully this will work well out to 50 yards without too much of a wonky trajectory. Hoping to use this at my dad's on Turkey day on his army of grey squirrels.



It's been raining all day, but tomorrow I will get some groups and better pics.

This PCP is simply blowing my mind, I’ve been lucky to have contrasted it to my Atomic prior to receiving a Ghost Carbine. I had a big scope on the Pathfinder which made it unwieldy. Once I downsized that scope? The gun simply shoned, light in weight, but outsized in utility with at least twice the shot count of my Atomic. I really loved my Bantam Sniper HR and the Pathfinder, a direct descendant, simply reminded me of that today. I was plinking wine corks, cut in half from 25 to 50 yards. The pictured cans at 102 yards? Consecutive hits, 7 MILs of holdover and 1 MIL of holdoff for wind. I knocked them down multiple times today. Best part all with inexpensive CPHPs… Simply foolish plinking of course. The “consistent” and “repeatable” hits still astound me… The Pathfinder has provided me many, many kills… It was briefly overshadowed by my Ghost, but she simply holds her own.

I've been sorta dabbling in slugs the past few months. Not really doing any serious tuning as my gun is first and foremost a backyard varmint gun. .22 / 30 FPE. I'm not really willing to tune the gun specifically for slugs. However, I've been trying different slugs just to see what sticks with the current tune. So far not much luck and I've just about given up. I understand that without proper tuning, I'll never get acceptable results. According to the manufacturer, my gun has a CZ unchoked barrel.

Now, I just ordered another gun that I'm intending to tune much higher for times I can get to more open areas. .25 / 50 to 55 FPE. The gun also has an unchoked CZ barrel according to the manufacturer. My issue is... ok, even if I'm willing to put in the time, effort, and money trying to find the proper slugs for the barrel and actually tune properly... and let's say I actually find the magic slug for my gun, is my only option then is to buy a butt load of said slugs? What happens in the future when I run out and the manufacturer had changed the specifications? Does the process just have to repeat itself? How do you all keep up with such a predicament?

The more I read into slugs, the more I realize just how sensitive they are even with barrels that are marketed and sold as "slug barrels". Acceptable accuracy for me is at least a US penny size group at 50 meters.

It's not easy and it's not cheap.

CZ Slavia 630/CZ77 Rifle .177 Still a nice shooting example of a Czech rifle. Has an auto safety. Trigger pull @ 1# 11oz. Shooting JSB 7.33 at 760fps. Has some freckling on the metal and the wood has some scrapes and finish missing but no gouges or cracks. $125 shipped to where legal in the lower 48 states US. Preferred payment types are USPS Money Order, bank MO or PayPal F&F.. I would also accept regular paypal + 4%. No trades.

Evening everyone,

I was watching YouTube last night and saw a review of a bull pup called the JTS Brawn. I’ve been thinking hard on a bull pup and gotten some suggestions here but was not familiar with this one. It looks very accurate with group sizes under 1/2moa at 40 yards. A bit heavy but seems to have a lot going for it including the price. Has anyone here bought this rifle? Where is it available? I’m thinking Christmas is coming….

Rick H.

I picked up a lovely BRK Atomic carbine a month back here on AGN.
Plan was to create an alternative <12 fpe HFT pistol.
It came to me shooting 8.4’s at <12 fpe but I wanted to shoot 13.4’s to buck the wind better.
AOA has a division called Air Superiority which makes an add on adjustable power wheel (hammer spring adjuster) which allows you to remove the carbine stock for pistol conversion.
This morning I removed the stock and installed the power adjuster SUPER EASY!
Voila I now have an Atomic pistol.
The transfer port has 3 settings, low, medium, high and the powerful wheel has ???? Let’s just say 8 as for my purposes I took it to max to tune and do my comparative chrono tests with 3 different weight pellets and worked my way down.
I ended up leaving the power wheel at 8 as it was very accurate with 13.4’s with transfer port wide open and power wheel on 8. For HFT pistol class I will reduce as appropriate to be sub <12 fpe.
Zero was at 25 yards and my group at that distance was 3/8”. If you study my work sheet below, it gives all the specifics.
I used the magazine for all my testing.
Although I have to remove the moderator to be hft pistol legal, it’s crazy quiet with this Weihrauch attached.
If anyone else has this setup I’d be interested in hearing about your settings and results.

Nothing crazy here, just sold my scuba tank and have no need for it.
PP or Venmo
PM with any questions.

I'm selling my CS3-I compressor that was bought new in May 2024 has less than 14 hours of use. Was serviced at 10 hours. This has been and outstanding compressor. Replaced it with a CS4-I which Is what I really wanted when I bought the CS3-I. Includes all the accessories that came with it. Will come in original box. Includes remainder of original warranty, til May 2025

Asking $245 buyer pays shipping CONUS only
Local pickup available
PayPal goods & services

For sale is my Huben .22, it has a bronze 25" barrel, 2018 mag with 12 grooves to match the barrel and a custom .218 sized magazine (for slugs). It shoots .223 slugs with the current magazine on it. It also has a custom shroud baffle. I'd also throw in all the .223 ammo I have. It also likes to shoot AEA pellets and 25.39gr pellets.

The slugs are .223 28.5gr and 32.8gr Varmint Knockers I have a few hundred rounds left.

Only selling due to compressor being damaged so this gun will sit for a while, I just fixed a leak yesterday where I ended up replacing the tophat and regulator metal housing o ring.

For more questions or pictures just PM me. This was Air Snipers rifle.

$1600 shipped or trade for a .22 or .30

I am a JTS dealer and have some of there brand new compressors to sell in stock. I am running holiday specials right now and have 2 of these available at a lower pricing than map. I cannot post the price due to MAP rules. Please reach to me so I can give you a price.

Benjamin Marauder .25
Walnut stock
Shot less than 1 tin of 200 pellets
Arthritis doesn’t like the bolt action
2 magazines
$350 shipped. Or offer? Trade?

For a lot of us things change when October goes. They way we hunt, fish, shoot. Outdoor responsibilities. Sports events. Weather. Dress.
I hate to see October go.

RWS 54 Air King .22 Sidelever T-06 trigger. Spring piston, non-recoiling rifle has been lightly used indoors only. One pound trigger, 21FPE. With 3-12x44 30mm Center Point scope w/side focus wheel, Sportsmatch DAMPA DM70 30mm scope mount, Sun Optics 11mm Recoil Stop Block SM7005 I purchased it new and will include the original box. $575 shipped to where legal in the lower 48 states US. Preferred payment types are USPS Money Order, bank MO or PayPal F&F.. I would also accept regular paypal + 4%. No trades.

Weihrauch HW77 Rifle .22 Under lever Spring gun. Still in minty condition Likes a number of different pellets and FTT 5.54 is one of the best. Includes Leapers 3x9-40 AO Mil-dot scope w/lens caps. This is the long rifle - not the carbine. The HW77 Box is included but it has the wrong number on it !!. $575 $545 Shipped to where legal in the lower 48 states US. Preferred payment types are USPS Money Order, bank MO or PayPal F&F.. I would also accept regular paypal + 4%. No trades.

Hi All,

This is a classic .25 Kalibr Cricket, this gun was built/tuned by Rocker1 (some of you may know him from another forum but he makes custom moderators and is a damn good tuner).

Gun has a HUMA regulator, comes with 2 magazines and fill probe.

Currently tuned for the 33.95 at 900 and is absolutely laser accurate! Slug wise the MK2 Knockouts as well as ZAN 30 grain shoot phenomenal well….

Gun has custom baffles in the shroud and the pellet hitting the target is louder than the shot!

It is not a safe queen by any means (has some dings here and there and the shroud end cap was notched when he did the regulator install).

I would say 680 shipped is fair.

Looking to buy a set of sights for Weihrauch HW77K.

Updated since original question…
Because I started getting help before I could start I over, I’ll recreate this mostly…

I’m trying to install the Huma reg on my Prophet 1, and running into some issues. It appears I’m through the first couple issues, and now dealing with something...

The bottle gauge on the Huma shoots straight up to whatever the fill pressure is in the external fill tank when you try to fill the gun and stays there when connected. As soon as I disconnect, the bottle gauge drops to around 100bar and stays there.

While connected, for over 5 minutes, both external fill bottle reg and gun reg stay on 230/220. Neither drops at all… until I disconnect and Huma bottle reg drops to 100 bar.

Update: after removing the parts and putting them back together less tight, I think that worked… everything is getting air and staying stable. I’ll check again later today when I have more air.

Final update: I think all is good after taking apart the new parts and putting them back together and keeping the parts loose.

For sale is this CGA - 347 (SCBA) fill station. If you are using one of the leaky , difficult to use set ups , here's your chance for an upgrade. This unit is made with quality parts from ;
Air Tanks Plus , Best Fittings , and McMaster - Carr. Selling the fill set -up only for $125 shipped with tracking to the conus. For $145 , I will include a Scott valve w/ o-ring for a complete system. Micro-bore hose can be included for an additional $20. Not interested in trades or offers at this time. Please deal by pm. Thanks for looking......Herb

Hello all, as I'm sure you read all the time I am new to air rifles. I am looking for a rifle between 200-300, scope is irrelevant as I have a scope rated for an air gun already. I am looking for the purpose of back yard pest removal. Preferably something in 22-25 Cal that can live in my truck. After doing my basic research I learned two things. One everyone who has taken then time to sign up on a forum hates the box store piston driven guns which was my primary plan. And two I found the Benjamin 392 which seemed near perfect until I realized it's been discontinued for a bit. Please keep in mind being quiet is very important for my needs. I even plan to paint parts of it orange before I get calls from neighbors about being out with a gun. Any help would be greatly appreciated. If I can get a 2 inch group at 50 yards that would be more then enough for my needs. If I am totally off base with my hopes and dreams then that is useful information too. Thanks for all the help.

Prophet performance compact 1 with cz 510mm .177 bbl in the 20/21 fpe range. Swfa 10x sf milquad on top. Substituting paintballs for starlings. Let the fun begin.