* Delete if not allowed *
I have a lift 29.5 loaded that I didn’t get to hunt with this year due to an injury. I’d like to trade it for a FX drs classic 700 .22 or .25 with accessories or add cash or Fx king .30 or .22 I’ll look at impact m3s as well or I’ll take 1800 shipped
Willing to ship or meet within 2 hour drive of Atwater CA

Like new sniper xr in Sahara. 2 mags and 3 tins of JSB pellets. Shot about 100 pellets through it but it won’t work for what I need.

$900

Thanks

Up for grabs is a super clean, like new, Athlon Argos BTR Gen2 ffp scope.
Nice clear glass, comes with scope caps, original box and will ship double boxed.
Currently have more scopes than airguns, since I've sold a few lately.

$215 shipped. PP ff.

Terry

I’ve had an HW30, for over a year and have been really enjoying it. Last week I swapped my Hawke Vantage 3-7x40 for a AIRMAX 4-12x40. I don’t personally know any other HW30 owners. My questions are 1) how accurate can I expect this little rifle be at 50 yards? I’ve just started shooting this distance at a range and I’ll try and attach what I consider a good 5 shot group at 50y. Second question, 2) I’ve just ordered an HW97 and a Hawke 6-24x50 AIRMAX IR, can I expect better accuracy at 50 yards with this fixed barrel springer? 3) I know each gun may have its pellet preference, are there any you recommend that are outstanding at 50 yards? Thanks for any comments from shooters with these specific rifles!

Hey guys, just a little update on my experience with the RTI Mora. It's been great so far, except for this bit. Seems that the screws I got sent with that secure the M-Lok Shield to the gun might be a little shallow. The hole is about 7.3mm deep but the screws only go about 3.2mm in depth, leaving 4mm of unutilized space. See the photo where I compare the depth to the screws themselves. When I had this slung over my shoulder it just randomly stripped both threads on the gun. I had used it like this for a while now, and I'm quite sure I wasn't rough on slinging it over my shoulder either. I had the gun set up as shown in the photo with the grouse I got (shameless brag).

I've emailed both the distributor and RTI themselves today so we'll see what can be done about it. I can probably just use longer screws but seeing as it's only 4mm of thread this time, I doubt 1mm more would have an effect for long.

Any other RTI Mora owners out there that can share if their screws are also this shallow?

Diana 34 EMS Lawrence of Arabia Edition .177cal. Rifle #297 of 500 total produced. German made and is in about excellent condition. Sweet 2-stage T-06 NTec trigger that can be adjusted to break under 1 pound. It likes JSB 10.34 and shoots them around 750fps. I purchased the rifle new and have only used it indoors. Has a custom guide installed and the original is included. Marks can be seen up on the scope rail that are hidden when a scope is mounted. Relisting due to nonpaying buyer. Pics of information tag added 12-12-24. Asking $260 wo/the gun case or $280 includes the Dian/LOA marked soft gun case(ships in a 2nd box) shipped to where legal in the lower 48 states US. Preferred payment types are USPS Money Order, bank MO or PayPal F&F.. I would also accept regular paypal + 4%. No trades.

Hi there all i got a question i buy impact m3 sniper (700mm)barrel waiting it to arrive but i saw much videos that need to be tune can someone give good tune fir standard 700mm barrel for these slugs i think i cant shoot heavyer with standard barrel

I have been always ordering from Edgun West, but is Edgun Shop just as good, their prices are cheaper too and shipping seems decent to the US? Are they in Spain?

Squirrel's lucky I didn't feel like cleaning

I see comments like "Pushing the gun pretty hrad" or "Running it pretty hot". These comments generally relate to regulator pressures and/or hammer spring tensions etc. I am not very knowledgable in PCP guns so wondering the affect of running a gun as 150 or so reg pressure, or I guess I should say, running a gun at the max the company recommends it for.
From a newbie viewpoint I am assuming that running at say 150 would put more stress on O rings especially as well as many other parts as opposed to running the same gun at 120 or less. I am sure there are a lot of you who will say you have run your gun at max pressure and is not caused a problem, BUT, my question does not relate to a particular gun but in general the running of max pressures as opposed to way less being easier on the gun.

I would like to get back into shooting springers (preferably TX200 or ProSport) and was wondering who the springer tuning gurus are these days? I used to know who they were years ago, but I'm sure things have changed......thanks for any help. Mostly going to just be for target shooting, and maybe field target if I can find a club near me in NW Indiana.

I have spent my time on pre-order lists. Not one ever delivered at a reasonable time. The longer you wait the better the choices become . Times must be good for the manufacturer. I had a prominent airgun dealer hold my $25. deposit for a year. Never happened. Performance is on their part. Let them play their PRE-ORDER games by themselves.

Weihrauch HW85 .177 I bought it new and it is still minty. It is working great & shooting Barracuda Match pellets for me at about 790fps. This is the long rifle - which has a barrel length of about 3-1/2" longer than an HW95 barrel. Very lightly used indoors. $310 shipped double boxed to where legal in the lower 48 states US. Preferred payment types are USPS Money Order, bank MO or PayPal F&F.. I would also accept regular paypal + 4%. No trades.

Just an FYI. Pyramid Air is running a nice deal on the Notos. I was looking for one as a project gun and was able to pick one up at Pyramid for $207.00 with free shipping and pellets. Deal ends today.

.25 cal, shoots fine, holds air functions as it is suppose to. Reg is set to 125 bar, power knob is half way between min and max power. H&H Baracudas at 930 fps. Includes Buck Rail can that I turned the texture off and wrapped in fake carbon fiber along with the cheek rest. Donny FL adapter, fill probe, extra orings, heavy and light spring, the two dove tail to pic rails, two mags, single shot tray, folding stock . Scope, bipod and rings not included.
It's been super dependable, it's in pretty good shape except for the 2 scratches shown. I shimmed the stock where it folds to tighten it up and added a set screw to the stock where it adjust the LOP to tighten it up also.
Purchased from a member here
Would like to get 450 (OBO) or trade for who knows what.

Those of you who stockpile pellets and slugs, how many thousand rounds do you usually keep around in storage? any concerns and worries of these lead getting oxidation after a few months or a year or so?

Looking for suggestions on a lightweight (sub 7lb unscoped), compact (sub 34” w/o moderator) .22 cal pcp that can do 55-60fpe fairly comfortably (not maxed out).
Experiences and thoughts?

So I’m looking for a springer that I can shoot in the back yard (sub 50yds), that is accurate, easy to shoot, and will easily take squirrels and chipmunks with open sights.

Looked at the hw95, but is it overkill?

Need recommendations from the springer pros.

Thanks in advance.

I have this FX IMPACT MKII .30cal 700mm fully mod. With Saber Tactical accessories and M3 block. Everything you see, is what you’ll get ( without Arken Scope).

I’m asking for $1950, plus $60 shipping

All my scopes have a flag bottom. Then this new scope I order came in and it have this thing on the bottom of the scope at an angle. Not sure what it is but I used a pliers and turn it counter clockwise and it came loose. I kept turning it and there is a spring inside that pushed the whole thing out. I was like wtf lol. I tried to screw it back but the spring was so hard. You have to really push it down and twist it back. Took me awhile but I was able to screw it back. So what the hell is this thing for? Why most scope don't have it and then there is this scope that have it.

Great show as usual from Tony McDaniel! And these pics are not even close to the tip of the iceberg - just a few highlights that grabbed my eye.

Let me start by kicking my own butt for NOT getting any pics of Paul Hudson's superb collection of pre-war German guns! Shooting his lovely and well-tuned second-variant Diana 58 was the highlight of my weekend.

Time machine back to about 1975: about a dozen literally NEW FWB, HW, Wischo, and Anschutz classics in their minty Air Rifle Headquarters boxes, with all paperwork and accessories. One of the most jaw-dropping things I've ever seen at a show...but all hoovered up by a well-known dealer. Enuff said on that...


Carl Wise's full set of FWB classics, top to bottom models 110, 150, 300, and early 300S. All 99% condition with fresh Pilkington rebuilds.


A unique wonder also at Carl's table - a gorgeous Redfield Olympic sight fitted to an FWB:


Steve Kitchen's display of pre-war classics. His unique talents for finding - and displaying - these treasures fills me with envy. Beautiful!




Larry Hannusch's artful display of three ultra-rare butt-reservoir repeaters:


If you are into pieces owned by the rich'n'famous...Elmer Fudd's vewy qwiet wabbit gun was not to be missed :


Last (and least), my display of three Diana target classics:


And many apologies to all the other folks whose great stuff I didn't get shots of.

I have a FX bottle and valve that I am currently not using. It has the 300B valve. $180TYD

Post up pictures or videos and descriptions of your smashed or expanded projectiles. Shot into whatever medium-- gel, newspaper, water, bloody or cleaned, this is an educational picture thread so hunter's and pester's can get an idea of the performance of their pellet or slug at different distances and power levels.

what is a fx impact mk2 second hand .25 700mm superior barrel no scope worth?

Is this just sanded from the factory or is it sealed with something? Put a few coats of tung oil and once it dried it looked the same.