So I finally got dream build finished for close range pest control. It's my original M3 Compact in a .30 cal 500mm config and a Element HYPR-7 prism scope. I tried out a few LPVO's with tactical turrets and turned my interest toward a 4x-5x prism sight. The only problem was they all had BDC recticles for 5.56 or .308 drops. The HYPR-7 was the solution for that.

So this is powered by a Air Marksman 300 bar bottle and the only internal mod so far is a FX tungsten hammer. It's pushing a JSB .30 44.75g pellet out at 878 FPS. I have three Impulse Air mods and I really like them. With just the shroud it sounds like a .22 going off. The Impulse 1350 with two extra baffles makes it really neighbor friendly.



The HYPR-7 prism sight was everything I was expecting and more. The glass is amazing and the digital HUD shown on the internet does not do it justice. The text and recticles were crisp and clear. I just had to make my own recticle for this beast


The digital zeroing on this scope is sooo dam easy. I took one shot and hit paper. Then fired off the rest of the mag and punched these holes. I'm really proud of that top right with it's 5 round group. You can see the single sight in round on the bottom row where there are two holes in one of the small bullseyes. Most of the 3 round groups were a little larger that what is shown. When I laid the target flat some of the blown out paper folded back in the main holes and makes the group look tighter than it really was. Still, I'm pretty happy with the result considering it was done with a low powered prism scope. This was shot at 25 yards.


Time for Squirrelicide!

With such a phenomenal platform if Huben would came out with Rifle and Pistol in .30 cal would be kick ass

I purchase a used 25.cal Redwolf from Jake at AoA not Jake from State Fram this gun is a shooter @90yards three head shot on steel no problem. Thanks Jake

HEADSUP saves 13% site wide (11/21-11/23). As always orders over $139.99 ship free. https://www.umarexusa.com/

so I was able to narrow down a few Huben’s in 25 which is what I want but I also have a great deal for a 22 special edition which is very attractive being that it has all the carbon fiber and walnut stock but that doesn’t serve any purpose to the actual gun, and what its capabilities are, which is what I love about the huben but have only shot my buddies .25 and it hits soooooo hard. I’ve been a .25 guy but most recently had .22 maverick and .22 Brocock sniper but it didn’t put down some small game like I would have liked to but ultimately got the job done so next would be accuracy im pretty sure there’s maybe slightly a difference in accuracy (capabilities) I think a .22 round has better ballistic coefficient then a .25 but I could be way wrong and that’s just what I was told By somebody.
Anyhow, if anybody has an opinion on this, feel free to chime in thank you and thank you to the community for previous helpP

Fully adjustable.
Bill and Addi.

Any one wants to trade their hammer for a atn 4k pro 3-14??

Let me know

I got a prompt on my search engine to try CNTRL AI, so I asked: what are the factors that ensure accurate shots with a PCP?



Interesting.

22 Caliber Resin Printed Moderators.

34mm by 100mm / 1.34" by 3.94"
67 grams / 2.4 oz.
22 caliber
1/2 x 20 UNF stainless steel helicoil insert

NLA

I have a Huben K1 .25 for sale, I bought this in October, fell in love with it, and bought another with a longer barrel. I have personally only shot this 38 times in the field, it is an absolute hammer. Shooting 42 grain AVS Slugs at 960 FPS.
The scope is a one leaf with clip on NV, I do not have the box for it, but the manual can be downloaded from the site.
I am selling the Huben, scope, loading gate (shown in pic) front post pic rail and around 300ish slugs. I attached the paperwork for proof of purchase.
$1600 obo for the works $1300 for everything but the scope and NV
SHIPPED AND INSURED to your door

PayPal FandF or you’d pay the fees.

Hi
Am a newby to this PCP airgun caper and would like a little help with tuning
Have a 22 cal Impact with carbon sleeve and the slug barrel fitted
Have been trying to tune for slugs and trying different slugs etc
Currently shooting ZAN .217 33grain slugs at about 820-830fps and they shoot well but that is as fast as I can get them to run with front reg at 190bar and second reg at 140bar
When I try and crank up the pressure on the second reg to above 150bar I blow the oring in the reg
Have read where people are running 165-170 bar and 950 plus fps and would like to do so as well
I do have the slug power kit with tungsten hammer but have not fitted it yet
Any ideas would be much appreciated
Regards
Stewy

I took this doe this year with my custom .308 air rifle this year.

This gun is slowly becoming a favorite in mi collection. I've made a post or two of killing iguanas with .177, using hornets, another with 10.3gr. I figure the hornets would definitely kill the large iguanas just due to the brass tip. And the 10.3gr I figured they would work on smaller iguanas, but a small alpha, with the 8.4gr??? Definitely made my day, at about 35yds right behind the eye, perfect shot on the large male, and female was just below her eye almost on her upper lip.

Also I have taken plenty of iguanas with the impact set up in 177 as well as my at44, but the at44 was putting out 28-29fpe and the impact was doing 32-36.

I've gotten iguanas with 14fpe but in .22, so this is new for me.

In the news.

Hi guys,

I currently have a Hill Compressor (EC-3000) and plan to maybe get a Huben Hand Pump (rated up to 350 bars) to fill my Huben GK1 Pistol.

I want to make sure that moisture doesn't build up inside the gun; is this inline filter good enough for the electric compressor AND for the hand pump as well?


Thanks for sharing your opinions on these. Since they're relatively unexpensive I might get two of them (one of the EC-3000 and one for the hand pump).

Georgia Airguns tuned .25 Cricket with soft case.

It’s a .25 Cricket tuned by Charlie and the barrel has his seven step accurizing process. Gun also has extended plenum to maximize power and shot count. Totally resealed by Charlie, it has a lifetime warranty if any leaking should ever occur.

The gun will shoot the Mk2 really well but for maximum accuracy it prefers 25.4 Kings.

Charlie has set the fill port up for a slow fill. Do not get in a hurry to fill the gun up. It can take up to a minute to top off the tank. He has also lightened the spring to the fill port dust cover so the cover doesn’t damage the fill prob orings when removing the probe.

The package includes an assortment of Orings, fill probe with QD adapter, four-twelve shot magazines which you will get all forty-eight shots before you need to fill the gun back up with air.

Also installed is a Donnie FL modified Cricket side plate which makes changing magazines a whole lot easier.

A soft gun case is included in price. ($45 value)

The gun is well balanced and easy to shoulder to shoot offhand. The gun does not include a moderator, only the factory shroud. I used it as a prairie dog hunting rifle and never felt it needed one. If you are going to use the gun as a backyard shooter, I’d suggest considering one.

Charlie set the trigger pull to 12.8 oz. With a short, predictable 1st stage and a crisp breaking second stage.

If you have any further questions or need additional photos or whatever, please don’t hesitate to reach out to me.










$800 shipped CONUS to your door by agreed upon shipper. (FedEx preferred and recommended.)

Sorry not interested in trades. Includes Fedex ground shipping unless you prefer a different carrier. I would be happy to discuss any shipping concerns you may have. Payment is requested within 48 hours of request of purchase unless otherwise arranged whereas other request may be honored.

One of our members recently experienced a tragic loss. Please keep in your prayers that you wish the best for our extended airgun families, especially during trials. You never know how much someone is hurting or how important a word of encouragement may be.

Respectfully,
Thank you.

Edited to link to Kevin's thread.

Not sure how many of you do this but when someone post a photo of a gun set up in a say a garage or man-cave do ya'll find yourself eye-balling everything else in the vicinity? lol
Maybe tools, clutter (like mine), cars and trucks or any other odd things etc?

So I went out much earlier today to do some Squirrel hunting, and once again I didn't see a thing. On my way back through the woods, I decided to take a detour that would lead me near a marsh, hoping that I may find a few raccoons by chance, even though it was just pass noon.

To my surprize, I saw something in the distance that looked like groundhogs, but these guys were doing something I've never seen a groundhog do, and that is actively swim! And with that, I knew what I was seeing was too small to be a beaver, so the only other thing it could be was a muskrat.

I raised up my monopod and decided to take this shot while standing. The FX Maverick launched a Hybrid Slug 52 yards (which just happens to be the zero distance), which erased all memories from the muskrat with a full pass through.

This is the second time I have taken game with the ATN X-Sight 5 5-25x LRF, but the first time I remembered to record and I decided to switch from using the 3840x2880 resolution to the 1920x1440 120fps mode so I can get some slo-mo, and I am very disappointed. The scope does the faster frame rate by line skipping instead of a more intelligent downscaling algorithm, and this simply destroys the quality.

Probably should go on the pistol forum but it was discussed here on a post just recently. The HW75 is one of my favorite pistols. I do shoot the actual 1911 quite frequently and like to keep my handling instincts fresh. The target grip that comes standard on the 75 is very nice. Fits me a bit tight but not uncomfortable. For target shooting, I like it. Fills my extra large hands. I do not think Weihrauch offers the 75 like the 45 in the standard 1911 grip frame. When the 75 first came out I did get one and made this same modification. Probably 30 years ago. A dear, now departed friend got it off me. I regret selling it and acquired one several years ago. Finally, just finished the modification on this one also. An option for anyone with a HW75. Added a trigger adjustment hole in the extension so the trigger can be adjusted without removing the grips or extension.

Hi Guys

Does any know if the Nikko Stirling Diamond Sportsman 10-50 X 60 scope is a 1st or 2nd focal plane scope?

I am considering getting a Taipan Veteran II (not the tactical) air rifle based upon the immense number of positive recommendations. I don't like the Taipan stock because it is too blocky. I saw a video where a fellow (Poland?) made a beautiful walnut stock for the Veteran. Does this fellow still do this? How to contact him? The cost?
Thanks
R0y

Hi ! Billions here. This is my first time in airgun nation and Im new to the hobby, i like it so far .

My goal is to practice prs and hunt small to medium game.
I´d like to start the hobby by buying 1 pcp rifle, 1 scope, 1 rangefinder and 1 chronograph once in my life time or as long lasting as possible before stuff breaks (stop spending that cash money $ and pay rent vibes ).

This is my shopping list so far:
Panthera fx 700 mm barrel, .25 cal.
Arken EP5 or EPL 4
Fx pocket chrono v2
Maven CRF.1 - 6X22 | 5-2400 YD or Leupold RX-1600 or tidewe budget option ?
slugs (not a clue which ones are right)

This list is made by me and my knowledge base on research i made. Im really not so sure what im doing.

My plan: I´ll start by practicing prs (350 yards max?) and eventually when i can afford it i´ll start buying parts to convert the panthera fx 700 mm .25 cal to a compact (shorter barrel, maybe folding AR stock, maybe change calibers, tanks etc...) for hunting and back to the original for prs, but using the same scope on both hunting and prs. Tell me, am i delusional?


So... my questions are:

HELP! am i in the right path to get to what i want?

Any other comments or tips on my plan?

Im open minded to constructive criticism and other recommendations or ideas. They would be greatly appreciated before I purchase stuff i can´t return.

Thank you guys for the support and information. Im looking forward to being part of the community and hopefully contributing cool stuff to it too .

Or for that matter Atn products. Freeze from the get go. Well, update the firmware good sir…uh, let’s see, the firmware on my scope is more recent than what they have available to download so there goes that idea. Try this, try that, then turn off this and that. REALLY ..but wasn’t that part of the selling point? So brand new, turn off every option, look for software, OUT THE BOX? No thank you, right back to ATN. Oh, the sales guys called me each time immediately when I was looking to buy…but now? Vmail, vmail, vmail. It’s ok, I’ll take my refund and go elsewhere ATN.

S O L D This is a powerhouse repeater 6 shot bolt action. Brand new over 400 FPE PM or please just call Jay 360 241 5293 I'll let MR Hollow point show power and accuracy. Check my feedback proven seller This will shoot arrows, shot shells and I've seen sabots and smaller slugs(balls should work too) for a kind of buckshot round. .