S O L D This is a powerhouse repeater 6 shot bolt action. Brand new over 400 FPE PM or please just call Jay 360 241 5293 I'll let MR Hollow point show power and accuracy. Check my feedback proven seller This will shoot arrows, shot shells and I've seen sabots and smaller slugs(balls should work too) for a kind of buckshot round. .

Does anyone know the twist rate of the .22 avenge-x?

What's the largest external plenum you've seen installed on a .22 avenger? I'm about to make my own since I haven't seen anything over 20cc and that guy want's a crazy price for it. AE Swede's version is only 10cc.

Five shots at 50 yards.

Hey homies,

During a shipping mishap, my precious lefty Air Arms TX200 sustained a number of small but very noticeable dents to the walnut stock.

Is there any sort of quick trick for removing these? I have heard that boiling water works?

I tried the search function but didn't turn up anything definitive.

Thanks y'all - Nico

Does anybody have a source of true, unbiased air gun reviews?
Reviews where the reviewers do not gain anything by making the review ?

Negative reviews, is there a single negative review out there since I have not seen one?

The vast majority (90%+) of the air gun reviews are very positive.
Many air gun owners complain and have many bad things to say about their air guns.

I choose to trust the air gun owners who shoot thousands of pellets through their air guns, not the reviewers who may shoot a few hundreds (at best) and call it a day.

I was able to pull some more funds so I am trying to buy a 1500$ give or take good quality pcp rifle. I would love a .25 huben slug version. Please let me know what you have in this price range also fx,taipen,krait,Uragan,etc

P.s. scammers beware I’ll drive up to 5000 miles need be. Thank you in advance

Thanks in advance

Medium size ( 2.5 inch), light brown. Holds 125 .177 pellets.
Used once. Doesn't fit my shooting technique.
No marring or scratches; snaps perfectly.
$30 delivered in continental US. (I paid $48 delivered directly from Wilkins.)
PayPal F&F or Zelle.
Perfect holiday gift.

I have remove the set screw from the lever pin, but what is holding it ?

S O L D. Theoben MFR .177 in chassis stock
Also includes original stock I’ve never installed since I’ve owned it
Rowan trigger. V-block with guage and foster fill fitting
890 fps using 10.34 jsb
8lb 12oz
Single shot adapter and original Theoben rings
Arthritis causes me to get a lever instead of bolt action
$1225 shipped

View attachment 408190

View attachment 408191

View attachment 408192

View attachment 408193

View attachment 408194

View attachment 408195

View attachment 408197

View attachment 408198

View attachment 408199

View attachment 408200

View attachment 408201

After retirement 2.5 years ago I began repairing and making furniture for my children. I made a couple of oak gun cradles between these family projects. I made these because I grew tired of taking pictures of my air rifles and rimfire rifles laying on the ground, carpet,, floor, and couch.

This is a very sturdy cradle. You can see most of the parts are made of nearly 2" thick oak. The dimensions are 28" long, 9" wide, and about 7" tall. Each of the large vertical parts are bolted in place from the underside. I inserted metal threads in each of these pieces and stainless steel hex bolts are then screwed in from the bottom and counter sunk. Very sturdy and easy to assemble. I've used cow leather for parts where the gun stock will touch the wood. I made the 1 1/4" diameter wood bolt out of oak (soaked in mineral oil) and threaded the bolt stand.

This is a very adjustable cradle. While most commercial cradles have some type of adjustment to pin the butt stock to the stock support mine also has a double set of rails the grip support slides upon. This allows the cradle to be adjusted to fit many different long gun configurations.

The entire cradle is finished in boiled linseed oil and I have put squares of velcro loop on the bottom corners. This cradle weights 16 pounds so It isn't going to be shaken no matter the firearm placed in it.

I only made four of these. I'm keeping one, I've sold two and this is the third.

I will send it dismantled with simple instructions for attaching the parts to the cradle.

Please add $30 for shipping. If you like PayPal so do I, but USPS money order is fine as well.

Thanks

Whoops, I didn't know the title tag I assigned to my pictures showed on the pictures. That "close up of the butt" is quite a bit misleading!

Got a great shooting notos for sale, only thing that isn’t factory is the buttstock, the rest is unmolested. Very accurate with crosman hollow points and hades pellets. Comes with 3 mags. $250 shipped. Scope and rings not included.

Now I’m familiar with the carbon fiber bottles having a max pressure of 250 bar and tested at 310 bar. Some CF brands allow for 300 bar fill which is nice. However, with aluminum bottles I have no experience.

I got this 500cc aluminum bottle that is probably from an older FX. On the bottle it says tested to 375 bar. I intend to put it on an Avenger that is capable of 300 bar fill (4350 psi).

Can I fill it to 300 bar safely? Or should I stick to 250 bar for safety?

I have a Will Piatt tuned Sam Yang 909s. It was power tuned with the trigger job and cocking bolt. He did the full works on this gun and it really shows!
This gun shoots about 300fpe with the 196gr NSA slugs, and can put 3 shots in 2MOA at 100 yards. Great little deer rifle!
Included is some air venturi air bolts, 196gr NSA slugs, hawke 2-7x32 scope and rings.

All of this is shipped TYD for $900, CONUS. I accept paypal F&F or G&S +3%.
Shipping is done in original box with double box for the gun, scope and ammos will be boxed separately.

What do you think about it ?

No nicks, no scratches, I upgraded to a 700cc bottle.

I've been wanting a Hatsan Carnivore since I first saw a guy using it on a YouTube channel. Nitro piston break barrel. Before I ordered one, I thought I would ask if there was anything else similar to the Carnivore that would be equally enjoyable to land black birds and other large nuisances in the neighborhood, with the option of small game hunting.

Very like new, all original tags paperwork and accessories, only test fired about 20 rounds, hole in hole accuracy at 75 yards, great pellet or slug PCP, it's simply too heavy for me, the electronic trigger is amazing, zero pounds of pressure on the trigger, Single shot tray, magazine, daystate hard case, original daystate paperwork, everything it came with new, 30 minute scba also for sale if anyone is interested in a whole package to get started
$900 for rifle, plus $200 if you want the tank and fill whip

Black friday sales are officially live!

Now till the end of the month!

Keep an eye out on the Black Friday Deals page, New items will be added throughout the week!

Happy Holidays!

WWW.THEPELLETSHOP.COM

The weather here in Michigan has turned towards winter again. The cold can really put a shooter down and keep them indoors. My friend has a solution and it is called an ice fishing shanty. Chuck has had the shanty in his garage for ten years gathering dust. His son goes fishing all year and fills his freezer with walleye so no more ice fishing. We repurposed the shanty into a shooting shanty. We filled the fishing holes up with plywood and cut some big shooting holes in the front of the shanty. The shanty is a standard sized sheet of plywood so plenty of room for each shooter.

We use an indoor rated heater to keep the cold at bay and it gets pretty toasty. The shanty keeps the temps in the 60's even with two big holes cut into it. When the weather gets colder we put a big horse blanket on top for insulation. We typically shoot for four or five hours with some breaks thrown in. When we are done shooting we take it back down, takes about five minutes to put up or take down.

I hope this gives other shooters an idea on how to keep shooting in the winter time. I suggest looking on Craig's List for an old ice fishing shanty. They are easily repurposed and keeps the elements at bay.

I have a mk2 i want to "adjust". As is stands now I have pin probe, huma spring and tungsten weight. Reg is at 155bar and I shoot .25 33.49 KO mk2 at 950fps with good groups.
BUT my tune is hopfully way off since i only get around 25 shots from 250bar down to 155, but thats is maybe how it has to be to push the slugs at that speed? Should I be able to reach that speed with lower reg pressure?
I tried to lower and get speeds around 900 but the slugs didnt like that somehow.

Brand new still in box. I bought it and decided to go a different route. Great scope
They run 650 on Pyramyd. I'll take 525 with shipping in the lower 48 states.

I've been shooting a long time. Got into air rifles a few years back. I've owed two Gamo's, a big cat wisper and whatever this newer one is. I love both, killed a lots of game with them. Now I'm here to find out what PCP I need so I can kill ground hogs, and hit starlings at 50 yards a little more consistently.

This is one of the first production .25 caliber Marauders that Crosman built, that got to me a couple days before leaving for S. Africa where it took literally hundreds of pigeons, and many hyrax and spring hares. This gun has been my main rifle on several prairie dog hunts, and other small game hunts over the years. But it has not been used in approximately 10 years and needs to go where it will be shot, it's a hunting machine. The camo is effective. I painted the stock, and the metal work is wrapped in camo fabric tape. I want $250 and will cover shipping in CONUS, payment by Paypal or Venmo.

I have a like new kaliburgun cricket tac 45 blue laminate stock for sale, very accurate shooting jsb 10.34 will ship with fill probe and 2 mags, moderator not included, no issues with the gun selling to fund another project, will ship double boxed. PayPal ff or ad 3% asking 900.00 shipped.