Edgun Leshiy 2
30 Calib
250mm Lothar Walther (only 1 barrel as shown in pictures)

Huma Air Mod 50 (Hornet) moderator (upgrade $260)
Huma Air Quick Detach (upgrade, 1/2UNF to M14,$95 w/ VAT from HumaAir)
Aluminum Rail (upgrade, sawed off originally long enough for 350mm barrel, $ not sure)
300 cc bottle (upgrade, $300)
Vortex Diamond Back scope (details below, w/ Cantilever mount, $390 optics planet)
Walnut Grip (upgrade, custom made, $150)
Refill probe
OEM 100cc bottle
2 Mags

Gun was purchased from EDW in 2021 as 350mm Long version. Swapped to 450mm barrel (sold) and settled for 250mm LW barrel finally (included). I think original barrel was Alfa.
The OEM silencer not with me since sold. Huma Air Mod 50 with Quick Detach, very quiet. Vortex Diamond Back scope, custom Walnut grip.
Very little usage. Probably a couple of hundred pellets.

Scope (Optics Planet): Vortex Diamondback 4-16x44 mm Rifle Scope, 30 mm Tube, FFP, Black, Hard Anodized, Non-Illuminated EBR-2C MOA Reticle, MOA Adjustment, w/ 30mm Cantilever Mount, 2in Offset, DBK-10026-KIT1

Asking $2200 shipped. Paypal F& F or 3% extra w/ invoice, Zelle or Venmo ONLY.
Can do $1950 shipped w/o scope.

and others https://www.pyramydair.com/search-results-ext?keyword=benshot

Up for sale is my FX Impact MKII .30 cal with many extras. I have babies this Impact and it is in pristine condition. Very accurate and tuned perfectly. Comes with many extras including
480 Cc carbon FX cylinder
Hawke AirMax 30SF scope and Fx rings
Extra Magazine
Gun was used mainly as pest control
30 cal is perfect for bigger animals
Shoots awesome groups with JSB 44g pellets. Ask any questions
Asking $2500 for all
Will entertain reasonable offers
Ships to CONUS ONLY!
Flat $150 shipping

I'm a long time powder shooter, but I wanted to get into air guns. I love NRA Silhouette, especially knocking down those chickens/pigs/turkeys/rams. So I look up an internet site to talk to some friendly folks like Airgun Nation. I get a whole lot of information about choices of what to buy.

Now to find a gun store. I do the same thing and go to the net to search likely candidates mear or far. Do not think that because NJ has rotten firearm laws that our gun stores are not doing any business. Far from it, walk into your average NJ gun store during the week (the weekends are really busy) and take your place near a counter. I would not dream of calling up a store by phone to ask what they carry. Herein lies the problem, all retail places today have that little box to contact us or fill out and leave a message. Just don't expect an answer any time soon. I looked up 10 places to ask if they carry air guns. Sent out a short message to all and got one response telling me we have some air guns on the rack. No types, no models or anything else.

NJ isn'tthe size of Wyoming or even Pennsylvania but to drive to NJ gun stores just to find out what they sell would cost you a lot of gas & time. Don't forget we can't get abything sent to our address without going thru an FFL first. If some store does shoot me an e-mail or PM, I'll let you know.

Took my ghost out for the first time and thought I would get more shots out of it before I had to fill again. I didn’t see from skimming how many shots people were getting on average.

This is my first PCP rifle so I am new to these guns so really not sure what to expect

Gun is BRK Ghost .22 plus. Reg is set to 150 and had the turn wheel on the back set to max. Shooting JSB 18.3gr and was getting about 50 shots with the gun filled to about 3300 psi. After the 50 shots the shots were really dropping. I only got about another 20 shots before the reg was in the yellow and the gun was only shooting about 100 psi.

Is this normal, what I should be expecting?

Also on each shot it weeks like a lot of air coming out the side hole on the gun, I assume this is supposed to be? Again first time with a PCP gun

Thank you

Chad

…start commenting on irrelevant 2, 3, 4 year old threads, be suspicious. Watch their activity in the classifieds forum and be mindful if they PM you trying to sell you something.

I finally took the time today to work with my new HW30. I had installed a Vortek PG4 tune kit in it last fall but never did much more than simple function check. Got it out today and over the course of a few target dots (5 shots each) I started noticing a gritty feeling in the cocking stroke. My first thought was the galling issue the 30’s are notorious for. But I have never had that problem with the installation of a sleeved tuning kit. This Vortek PG4 is my first with the new steel sleeve. Always used the nylon ones in the past. So, I removed the receiver from the stock and started examining the underside. No galling. Thank goodness. Then I noticed the Vortek steel sleeve was full of rust. Wonderful. Tore it apart and removed the rust. Not to heavy to pit the steel but quite enough to feel it in cocking stroke. Used silicone grease this time on the outside of the sleeve. The climate here is the 3rd most humid in the country. Just a warning for anyone using the PG4. Grease the outside of the sleeve thoroughly. My first time using the Gehmann diopter also. This was my best target dot of probably a dozen. 20 yards. RWS Basic pellets. One elbow on my rocking chair arm. Life is rough.

Which moderator is the quietest between this four? The new DonnyFL Ryu, the impulse air, the famous DonnyFL Sumo or the 0 db? Thanks

Fx crown continuum with 380 barrel and aluminum tank . i dont have the 700mm barrel.. I'm asking $1200 .. PayPal friends and family..

Hello all, I have this Beeman Kodiak that I bought somewhere between 2004 and 2005. It's been fired maybe a couple hundred times at most. It's pretty much new. I've moved at least 10 times during that time and it always comes with me, but I'm never going to use it.

So I would like to sell it, but I have no idea what it is worth. I know there is a Classified section on the forum, but I thought I'd reach out to ask if anyone has any idea of the value. It also has an Airforce 3-9x40 scope and a case that comes with. I remember I paid around $600 for the rifle.

So took the slayer out.

At a 3450 psi full

6 shots go from 310 fpe to 260 fpe shooting 158gr hollow points.

The rifle is accurate , being so light and making ~300 fpe it does have some kick but it's manageable for sure and I need to get better at it.

First group is 6 at 55 , my very first group after zero.

Second group is at 95 and it's 3 shots sub .75 moa.

The rifle is sexy, light, the trigger is amazing best bullpup trigger hands down it's very light and a clean break.

Both groups were shot on ten power through the helos btr.

I can't wait to learn this rifle more

Black Friday price update
Price $1,550 shipped and insured.

Lowest price around!

Selling a very nice BRK Ghost HP .30 . It has an upgraded 580cc bottle and 1 magazine. It has other items like spare breech ring and extended fill adapter. If you want any other accessories, we can talk for an additional price.

Having just purchased a 3rd rifle a little while back, I miscalculated my “gun fund” when i made these purchases and went over my allowance. I need to make some room. Willing to take a loss at this price to get my funds back in order.

I usually accept PayPal or Venmo, or if I know you or you have excellent history, other methods of payment. I have lots of good feedback here, so deal with confidence.

You know these don’t come up often, so don’t wait…. Priced to sell.

I tried shooting at 100 yards for the first time with a .22 cal springer. Last week I shot at 50 yards and was happy with the results.
I was shooting my RWS Diana 54 with a Bullseye scope mount and a Vortex Crossfire II 4X12X50 scope.
Going from 50 to 100 yards I had to hold at least 40 MOA higher. Using the impacts on the sand berm as a referance I adjusted the scope to max elevation and it still needed another 25-30 MOA to reach center target.
Going from my usual 25 yards out to 50 yards wasn't too bad in scope adjustment but 50 to 100 yards was unobtainable with my setup.
Once I made POI reference I was able to make 5 of 5 hits on the cardboard but aiming 30+ MOA high was not even fun for grouping.
Any tips from the pro's? Maybe shims on the mount or forget about it?

I have (for several years) several no limits. They are slipping ( nor holding elevation). Any body else have this problem. More over does any one have a good fix?

Other thread got me thinking.

The notos IMO is worth the money, even with junk mag. In factory config, it makes alot of sense for multiple intended uses.

Quality seems to be there (NOT the mag) Certainly at the price.

That said, seems alot of guys are adding all the aftermarket garb...which brings me to pondering the cost:

Notos: $230
Plenum Kit: $50
BuckRail kit: $220 +
Carm/Maple mag: $30

What would you buy instead of the modded Notos, with a budget of $600?

In regards to price/value/quality comparatively?

Plenum powered American Air Arms EVOL30 Carbine (.30cal 18" TJ barrel). Purchased this new from AoA 11.28.2022. Tom sent me this plenum a while ago, and it's a must have for power and optimization. I had it shooting 62gn slugs at 950FPS with room left on the reg, but I've dialed back the reg pressure to the factory settings.

I set this rifle up with a Law Tactical folding stock adapter as it provides very easy access to the hammer adjuster. This MDT stock is phenomenal .. extremely ergonomic with lots of adjustability, and it has female QD mounts for a sling.

I have $4K into this build including $1161.93 in accessories (before taxes and shipping). Here's the list of what I bought for it:

MDT SCS - Skeleton Carbine Stock
$369.95

LAW TACTICAL LLC GEN3-M FOLDING STOCK ADAPTER
$239.99

Magazines (4 Total)
$196 (x2)

American Air Arms Evol Barrel Removal Tool
$98.00

American Air Arms Evol Gauge Tool (Necessary to remove the cylinder gauge, 1/4 drive socket)
$40.00

American Air Arms Evol Moderator Nut Removal Tool (1/4 drive socket)
$45.00

DonnyFL 1/2-20 Adapter + Thread Protector
$40

KRG Angled Bag Rider
$32.99

Huma Regulator
$100

Willing to offer this as a full package deal, stock, or ala carte (rifle + whichever accessories that you want with it).

Option #1: $2500 for everything
Option #2: $1700 for the rifle with the factory Magpul PRS stock, 2 mags, and DonnyFL 1/2-20 adapter.
Option #3: $1750 + ala carte accessories (let me know which ones you want)

Terms: Zelle, Venmo, discrete PP, or US money money order. CONUS only, I'll split the shipping fees.

I'm using a lightweight Diana Bandit/Chaser hybrid PCP airpistol for 10-meter target shooting. I'm looking for a scope which gives me enough magnification to see where I'm hitting the target at 10m. For this I think I need at least 2x, but I would prefer 4x or 5x. As the thing has basically no recoil, I'm wondering if I can find an optic which allows me to press my eye against it and thus create more points of contact. The various 3x, 4x, and 5x prismatic sights I have seen look very interesting to me, but they generally have their parallax correction fixed at 100m. I'm assuming trying to use one at 10m would not be ideal. Am I wrong about this? What optics can you think of that succeed in or come close to fulfilling my list of wants? Thanks for your help.

Hi All,
I stumbled across this forum last weekend when I fell down a rabbit hole of learning about PCP airguns. I really appreciate all of the info gained from your wealth of knowledge, good posts, and humor. Thank you.
To give things a try I opted for the easy entry: Hatsan Jet II and a hand pump. I've had a few days to enjoy the sport and there will be some upgrades in the near future.

My background is in marine science and a bit of military experience. My other firearms include 9mm, .380, .44, and .22cal sidearms, as well as a host of rifles ranging from .22 to .308 & 30-06. All are conventional firearms, but I have a feeling some of those will be replaced with airguns.

Interestingly, is is much easier to buy a conventional firearm in Florida than it is an airgun. If anyone knows of resellers in the Tampa area, I'd appreciate it. I'm sure we all would like to handle a gun and buy in person vs online.

Thank you again for all of the good info.

.30 MK2 (700mm barrel)
.25 MK2 (700mm barrel)
.22 MK2 (700mm barrel slug liner)
.177 Silver Impact X (600mm barrel)

All rifles have been tuned by one of the best airgun names in the West, these are priced without scopes shown but available as an add on
All rifles have at least one extra magazine
All rifles come with an FX hard case
Most come with extra magazines
No leaks in any of them
Moderators (Sumo, Tanto, Koi and FX)
Sabre tactical bipod extensions
Sabre tactical adjustable shoulder mount
Adjustable custom cheek pieces
Extra ammo/slugs for which the rifle is tuned.

Shipping will be calculated based on buyers address and is in not included in the price of the rifle.

Asking $1300 for any rifle

NO TRADES

PM for additional info or questions.
Paypal payment only (Using FF or you cover their fees)

Rifles will be shipped within 48 hours of payment.
Thanks for looking.
Jimmy

Now that I have a compressor, I can finally start shooting without trying to conserve air. I was doing my best to make the initial fill from SPAW, last until the compressor arrived. I managed to shoot one mag of the FX 18.1s and two mags of the Atomic 15.9s. That took me from ~ 235 to 170 bar.

After my first fill from the compressor, I wanted to try the .22 Hybrid Slugs in the Wildcats mkIII as that's what SPAW tuned the gun for. I was able to shoot four groups of five @ 51 yds. My two best below. My best was my second group. I was impressed with how much flatter the slugs shoot. I got so excited after the first four shots, I pulled the last shot left. My next group I shot high first, then strung four horizontal. I need to spend some time shooting to develop my hold and trigger pull for this gun. Well, and find a better/more consistent position to shoot from.

Those 20 shots took me from 232 to 175 bar. The tune from SPAW is 1st reg 150 bar, 2nd reg 110 bar, Hammer spring 7, sending .22 Hybrids at 905 fps.

Surprisingly, my zero for the Atomics worked for the Hybrids. I didn't change anything and getting similar groups from both. Atomics being a fractionally larger group.

I feel like I should be getting a lot more shots per fill with the bottle. I've read and watched videos about a balanced tune. I'm guessing the HS on 7 is spending a lot of air. I know I need to get a chrono. But, wouldn't it be more efficient to tune to gun to get the same results at a lower HS setting. Maybe 3-4. Then I could adjust up or down if needed.

I don't plan to mess with the 1st reg but, how can you read the pressure for it? Or, is that set from the factory?

Thanks in advance!

I have too many .22’s, & I really enjoy my 52 .25 side lever springer. I know I would prefer a good .25 break barrel.
The R1 could do great with the alloy .25’s or the 20.14 FTT’s.
I just need to know who could convert it.

Anyone else remember the air rifle (without any sights) training to shoot washers, with their centers taped over, out of the air? Great basic instinctive shooting drill. Fun!

It came in handy at 50 playing paintball with a bunch of 20 somethings. They kept asking "how can you do that"?I'm not telling as you would not believe me if I did.

We tought that we need private airgun range, so here it is. Any ideas are welcome what can we build/get here to make it better.

Todays guns were FX maverick, Hatsan jet 2 and Gamo swarm magnum 10x.

This white tree rat (not an Albino) has taken up residence in the yard.

Wife adamant it has a “get out of jail” card and I am obliging thus far.

However, it doesn’t seem to be able to keep friends very long…

For all the Early Birds; Black Friday week at Huma-Air with discounts up to 40%

With the coupon code Blackfriday you will receive at least 15 % discount on all Huma-Air parts like Regulators, Moderators, Tuning Parts, Vector Optics and many many more items.

Dont forget to Check Out Huma-Air Sale Section for more fantastic items for clearance prizes

Click Here To Visit Huma-Air

All the best

Team Huma-Air