I have an Avenge X classic tube in 177 for sale.
There is a wrench mark on the end of the shroud (included in pics) I removed it to clean the barrel and it was insanely tight for whatever reason.
It has the saber tactical chassis, Discovery 4-16x44 MOA, side folder, Magpul tube and stock, bipod and I’ll throw in some Zan 10gr which it really likes. I only have the original mag for it and the single shot tray. $500 shipped in the lower 48. I take PayPal and Venmo. PayPal is F&F, or you pay the 3.5%.

I have 3 pellet pouches left they are the small hold around 160 .25 pellets and are around 3 1/4 inches total diameter. 2 are finished and ready to ship the third can be customized to your needs. It can have a lanyard loop, belt loop,belt clip. Thanks for looking
Price will be $40 pluss options insured and shipped to you

The bottom pouch is sold

NOTE: If you’re interested in just the pistol without the scope, send me a message.

I purchased two of these in November 2024, one for myself and one for my son. He has absolutely no interest in a PCP Pistol. He loves his air rifles. With that being said, selling a brand new, never shot Huben Pistol GK1 .22 Cal V3 w/Accessories. Again, it's brand new, never been shot.

• Huben Pistol GK1 .22 Cal V3
• Huben GK1 End Cap 1/2x20 Adapter
• Huggett Mini-Magna 1/2x20 UNF
• Huben K1/GK1 Loading Gate
• ARES for Huben K1/GK1 V1-V2 Magazine Release Arm Set (#47, #48, #49, #50)
• Carbon Fiber Gauge Cover & Fill Port Plug
• Burris 2-7x32mm, 1in Tube, Second Focal Plane Handgun Scope
• Detachable Warne Rings
• DonnyFL RYU 1.22 x 5.25 Inch Moderator with (QD) - .25 1/2x20 S79
• Pelican Case 1450 Case

Will be coming from a smoke and pet-free home. This is a really good deal!

Location - Pennsylvania
Price: $1,800 (w/Pelican Case)
Price: $1,700 (w/Std Huben Case, will not fit the pistol with the scope on)

Not interested in trades.

I am in favor of most of our new president's actions but I wonder what impact tariffs on China will have. My favorite P35s easily fit under the now former $800 limit for application of the former tariff. Now I've heard that has gone away. Our less expensive guns and compressers come from China. I guess they will now be a little more expensive. I hope that is the only impact.

Curious if anyone has seen or tried this new Notos plenum yet. I went on eBay looking for the 15cc tube plenum hoping for a little increase in power and saw this one that I haven’t seen before. 25cc and claims to add 60-100 fps. I was hoping for a little more power on the Notos and hope this gets me closer to 800fps. Currently shooting 725fps (18.5fpe) with 15.89g Hades. If this can get me into the low 20s I’d be pretty happy.

Here is a great video on what can be achieved with a tune job. There is a lot of time and effort that went into making this video. I watched it and although I think most of us understand the benefits of tuning your spring gun. It’s a great watch.
enjoy…

I’m looking for a Falcon FN12 in .177 (preferred) or .22, do you have one you’d part with? PM with the details and price.

Thanks!

It seems just 4 years ago the interest in airguns was massive and now it seems to have cooled off substantially, with the crack down on moderators and airguns in general, not to mention the higher cost of airgun over real guns seems to caused a cooling off towards the sport too.
Even selling off old gear seems to be slower also, I've had one of my rifles for sale at a reasonable price for over a years and no interest
What do you think?

It would be nice if they could take ads that have been renewed a couple of times and move them to a section for previously viewed ads. It’s a pain in the a$$ to have to scroll through so many old ads to find a few new ones. Just a thought.

hello.. so back in the day. My Dad gave me a One Shot pellet Gun Pistol.. lost it over the years... anyways.. move out in the Country.. with about 3 arc.. looking to get a few Air Guns.. so the 3 i been look at ... mainly target for me an my 7yr old to learn abount guns a safety ..an shooting Predators.. that get by my chicken coop...
these are local here an in stock... Yea i live here OKC.. not sure there much for air gun shops

Umarex .22 Caliber Komplete Nitro Pellet Rifle​

Gamo Swarm Magnum G3i Air Rifle with 3-9x40 Scope​

Hatsan JET I Air Pistol/Rifle​

Which daystate air rifle is the quietest in .22
I know its the electronic ones but is there any difference in sound level between them? Which one is the quietest

Sigh...my Notos trigger hinge pin (2.5mm x 15mm) rolled off the desk while making a few enhancements and chances are low for recovery. The pin in question is in the attached picture. Any thoughts on where to source a replacement? So far, I haven't found anything via searches.



Thanks for your help!

Hello shooters! I have one of the first FX Impact made FX smooth twist 30 Cal it use to shoot like a dream. Last year it started lobbing pellets, So I installed a new seal kit. My gauge on the bottle reads 200bar the regulator gauge reads 130bar did a leak test from butt to muzzle even let set for 24hrs shows no leaks and gauges never lost any bars. finally shot it 30yrds watched the pellet drop at the front of the target. how disappointing. If any one knows or can tell me how to resolve this issue. Sure will appreciated it thank you!

Here are my thoughts on the scales and methods used to weigh pellets.

We should focus on three key aspects:

**Accuracy** - Is the measurement correct when the scale indicates that a pellet weighs 1.175 grams? Is it necessary for us? Alternatively, are we more concerned about consistency so we can categorize all pellets of a given weight together?

**Precision**—Your scale should be able to read at least two decimal places, but preferably three. If a scale with two decimal places shows that two pellets weigh 1.15 grams each, one pellet could weigh 1.15 grams, while the other could weigh 1.59 grams. Therefore, three decimal points are necessary for precise measurements.

**Repeatability**—This is the most critical aspect. If I weigh a tin full of pellets, I need to ensure that the weight of each pellet reads the same at the beginning and end of my session. Otherwise, what's the point?

Additionally, when choosing a scale, consider the weight of the pellets you are measuring. If you shoot pellets that weigh between 1 to 3 grams, a scale that can measure 50 grams or more may not be ideal, as your measurements would be at the lower end of its range. Instead, look for a scale rated closer to the weights you typically measure. Since I only shoot .22 caliber pellets, I prefer a scale measuring 0 to 20 grams. (Finding a budget-friendly scale with a smaller range can be challenging.)

It's also worth noting that most scales include a calibration weight for their upper weight limits. For example, a 50-gram scale often comes with a 50-gram weight. My scale, however, has a 10-gram weight, which allows me to verify its accuracy much closer to what I typically measure.

Scales come with valuable instructions, such as allowing them to stabilize at the ambient temperature where they are being utilized and ensuring that the surface they rest on is level and stable.

I routinely check the calibration of my scale with the designated weight approximately every twenty pellets to ensure that it hasn’t drifted and to confirm that its accuracy has not been affected by my overloading it during pellet insertion or removal. It doesn't take much.

Please let me know if any of this was helpful.

Geneeus

So I chopped the POI shifting to high winds day to day here sense I got my gun back from warranty. The accuracy is changing between shoots 1 to 1 1/2 mils left to right and 1/2 to 1 mil low or high. I've not touched guns settings sense I've gotten it back! Tomorrow Im doing full chronograph number and trying different scope. Scope now is element optics helix.
Calling utah to getting warranty started. Starting to hate my decision on m4 .177 route. Probably get a lot of haters on FX owners but doesn't change my mind on FX being the best hunting rigs. I'm not a paper shooter so 1 hole groups aren't my goal at all.
Avoid the M4 in .177 anyone looking to buy new. Yes there are people going to cry out and say it's a tuning gun it meant to be adjusted and messed with and I'd respond shut up its a new gun. At least perform out the box before tuning to my individual need's. Hate to bail on the M4 but it might be time!

Not an FX

Bullpup in .22 caliber

Bottle with high shot count

Purported to shoot lights out with Pellets or slugs.

Purported to hold POI

Simple to work on.

Foster fill probe

Bottle/Tank gauge

Regulator Gauge

External Regulator adjustment

External hammer spring Adjustment

Under $1,900 us dollars

The only competition I do is against my last group. My preferred hunting range is 30-120 yards.

Krait X and Uragan 3 are my runner up’s that I like, but they don’t meet my spec’s

Up for sale is 4 Daystate for sale 2 wolverine HP and 2 wolverine 303 All .303 Cal Come with 1 mag each. Call or text 860 992 2527 for better pics of which one you are interested in. They are all in good condition. The HP are the thumbhole stocks and the 303 on the sporter stocks.
Asking 1000 plus shipping for the HP without the hawke scope.
Asking 1400 plus shipping for the HP with hawke scope.
asking 1200 on each 303 plus shipping.

Parker Hale Dragon sporter, single stroke pneumatic in 22, $650 - shipped.
This is perhaps the most robustly constructed ssp out there and is in very good shape but stock does show evidence of use as a hunter... likely in Great Britain. It is sub 12 ft lb and is around 11 ft lb +/- with one stroke. It works properly... possibly better than new...
Be aware that this is a heavy rifle... it's all heavy steel and walnut...
I had the FT match version and this one is built better so likely the Mk2, though no markings... just the differences in valve and trigger.
Somewhat rare and definitely interesting...


I don't have any particular attachment to this UTG scope so if desired, can probably work something out...
I recently resealed it so should be good for years. I've shot about 500 rounds since reseal and it's consistent and reasonably accurate...
Thanks for looking,
Bob

Theoben Eliminator in 20 cal with Bausch and Lomb 3000, 4 - 12 x in nice condition.
It came to me doing 26 ft lb with JSB 15.89s. I bumped the valve lightly and it dropped to 23 ft lb and is a bit easier to cock.
The only flaw I can find is the mark on the barrel as pictured. Nice stock... has some non-skid applied to the fore end but I can't see any damage with that install and it actually handles nice with that in place. This is a powerful, heavy springer but very beautifully finished...


Price includes the scope and shipping in the conUSA...
Thanks for looking,
Bob

GONE - I'm done with the magazine design for this rifle and want to rehome this nearly new sweet shooter. The sale includes the rifle, 2 OEM mags and 4 new Big Air 10-shot mags ($100 value). Super smooth sidelever action and feeds great. It's tuned for 25.3gr at ~900fps. Shoots best for me with AEA 25.3gr pellets.
$340 shipped Conus. PayPal F&F or you pay the fees. I'll ship UPS.
Thanks
Tango Sierra

I have a as new in the box with all acc's Taipan Veteran Long 22. Beautiful, laminated stock. Shoots like a laser like every other Veteran.
It comes with everything it came with new, manual, pins, orings, and has an extra 1/2" mod adapter, but there is NO NEED for a moderator at all. Currently tuned to shoot 18gr @ 880 fps and getting well over 50 shots.

I am not a big bullpup fan, (unless it's an Impact).

Trades I'd be real interested in, 22 or 177
* Impact
* Cricket Mini Carbine
* Crown Mk2
* Brocock Bantam Sniper, .. especially a magnum
* Katran
* high end scopes maybe

Most anything really that is not a bullpup, might consider a Prophet Performance
It doesn't hurt to inquire if you have something interesting.

I have an extra Snowpeak bottle adapter valve and I am looking for a way to use it in a build. I have a range of calibers but no PCP .177. Can anyone think of a way to use this in a .177 build since Snowpeak m60s in 177 appear to be unavailable indefinitely?

People send me lots of pictures of BR cards and ask me what I think.

First of all....there is very little I can tell by looking at a card with no knowledge of the exact wind conditions and how the shooter held for each one. It would be far better if the shooter aimed at the same place and then said the wind was this or that.

Anyway,...one thing I can tell when I look at a card is whether they had a good vertical zero on the scope. If you have a good vertical zero....you will have an equal distribution of shots above the center line and below.

Even the very best rifles do not shoot a single bullet sized hole for 25 shots. The very best will be at least double... and most more than that at 50y.

So if our imaginary gun shoots a vertical spread of 3 bullets wide for 25 shots....the actual scope zero is in the middle of that group.

I see tons of cards that have no shots either above or below centerline. 15-20 shots all hitting near centerline in vertical and then some low misses. If the shooter simply raised the scope zero a couple clicks they would have missed significantly less or none at all.

BR is won by hitting the 10 the most. Hitting dead center won't raise your numerical score...but you will get more xs. If you want to get a higher score....you should stop thinking about xs.

Lots of things can change you vertical zero a couple clicks from card to card. One example...If you use lube...it will take a while for it to be fully distributed over the length of the barrel. Getting on a card immediately may result in a different vertical zero then you had on the last card. If you want to get the most points every time...you should never trust that your vertical zero is exactly the same. A couple sighters that land dead center doesn't mean much if your vertical group size over 25 shots is 3x that size.

I hope this makes sense.

Mike

How Air Venturi can offer so much for so little. Shown here is my Avenge-X topped with a Hawke Sidewinder scope.

I have an almost brand new karma SLS compact in 22 caliber. I’m looking to sell. It will come bone stock all the upgrades you see in the pics are not included the purchase date 11 2924 purchased at the pellet shop. Send me a email sometimes I don’t get notified when I have a message from this site [email protected]

Asking $950