SCOPES - FOR SALE

Hello everyone,

I have for sale the following rifle scopes which are just like new condition and in perfect working order. At one time each scope was mounted on a rifle and shot from indoors on a benchrest. These were all purchase new from a dealer and I have all of the original boxes and items that came with each scope. I will ship these double boxed to lower 48 States only.

Please NO TRADES: If you have any questions send me a PM. I have all Positive Feedback here on the Forum.

I have these listed on my personal website so they can be purchased with a credit card.

VectorOptics Tourex 6-24x50, FFP, 30MM, Tube, w/Rings, SCFF-19 , $250.00


Aztec Emerald 5.5-25x50, FFP, 30MM, Tube, w/Rings, AZT-E552550FFP, $435.00


SOLD: VectorOptics Minotaur 12-60x60, SFP, 34MM Tube, w/Rings, SCOL-40, $375.00

Thank you,
ThomasT

I have a chance to buy a full large, brand new, grease gun tube of Krytox 206 grease for $75
I'd buy it, but that's enough grease for about 5000 lifetimes of lubing airguns. If there's any interest in splitting it, I'll buy it and share the cost.

An hour of walking with the notos and looking through the trees resulting in 21 iguanas, recovered 20 shooting polymags at 735fps average

When my young TN friend visited me in Iowa this past weekend he provided me his FX Streamline .22 which is deathly quiet like my custom tuned AA S200 .177. He also gave me a NIB Notos and said it probably needs a slight detune as he suspects they max these things out at the factory. I've got a chrony, the tools, and some rudimentary knowledge of PCP air rifles. How "low can I go" or can't I improve efficiency (noise) by merely adjusting the hammer spring screw? I have no plans on shooting this Notos past 35 yrds and it will have a red dot on it to keep it light and "handy."

So I am looking for a decent scopes. I don't need the best of the best. I dont need to spend a thousand dollars in a scope alone. I'm just a guy with a family to feed. So saving money is Important. I am looking at the element scopes cause I watch Matt dubb and Ted holdover. They talk a lot about these scopes and claim they are like the best for airgunners. I looked into the elements scopes and there are so many too choose from. I don't need to best, but I also don't need to worst. Anyone know anything about these elements scopes can help me out. I just need a middle ground scopes that doesn't break the bank. Looking between $300-500 budget. Guns I will be putting it on would be an .22lr ruger, fx impact, Benjamin marauder. I see there are the nexus, nexus gen 2, theos, helix, titan. What are the different and which one should I go for.

The Slayer appears to be a simple platform until you take it apart and see not only the excellent machining but each piece is masterfully designed for its purpose.



The balanced valve is much different from the ones I’ve seen. Instead of the venting chamber being inside of the valve stem, it is a part of the valve body. A valve return spring is not used. So when the rifle is degassed the poppet is lifted off the valve seat and remains that way. When airing the rifle back up it leaked through the valve because the poppet was off the valve seat. Gave it a strong blast of air from the tank but it still wouldn’t seal. I took off the air tube to access the poppet and pushed it down to seal the valve.



The retractable probe is an innovative design. When the rifle is cocked the probe releases an extension that will push the projectile into the barrel. Upon closing the probe a spring loaded mechanism is triggered and retracts the probe. This creates an unobstructed path for air to flow. Also contributing to optimal airflow are the angled and radiused ports. These are mods that guys will do to their rifles but Tom had the foresight to incorporate them into the design.




The moderator is a modular design built specifically for the Slayer. It is well built and does a good job at taming the bark despite being smaller than what is normally used for a big bore. Not backyard friendly but ear friendly.





The trigger does not feel like a Bullpup trigger. There is no slop and it has crisp break.

So far I am very impressed by the quality of craftsmanship and design that went into the Slayer. Had fun resealing this one. Now I just have to find the time to get to the range and shoot it!

Or are they 2 sides of the same coin?

Can’t wait for this weekend , Just got this Baby in today 25 cal

Custom boot-up screen on the EVO!

Just wondering what everyone's experiences have been. What have you found to be a bargain, what should just be melted down for lead and what are they selling for per pellet?

I've had very good luck with H&N FTT's in .177, 8.64 gr. and .22 Baracudas in 18.1 gr. I get great accuracy out to 50 yards and beyond with them. All prices here are after factoring in the 4th free tin at Pyramyd. The H&N's are 2.1 cents a shot in .177 and 3 cents in .22. Not super cheap, but not bad either and almost all of my guns like them.

Lately I've also been shooting .22 Norma 15.9 grain pellets at 2.25 cents a shot and 14.3 grain Crosman Premiers at 1.7 cents per shot. No complaints so far, but I haven't really done any bench rest shooting with them either.

One variety I had very bad luck with and now avoid are the Crosman pointeds. I'm not sure what I paid for them, but I got two tins with varying head sizes. Some would easily slip into the breech of my HW30 and others had to be forced in smashing the skirts in the process. They are one of the cheapest pellets out there, but in my experience they still aren't worth it.

I recently noticed that after discounts .177 Norma pellets are less than a penny a shot and I'm planning on buying a few thousand of them.

Looking to sell my very little used .177 DreamTac Compact. I bought this from the owner of 910 Airguns and this was his personal airgun. My plan with this pcp was for night time pigeon blasting but things never panned out. Everything has been worked over on this DreamTac. The trigger is light and crisp, the lever has a shorter lever for fast reloading, has a larger aftermarket bottle which gets over a hundred shots at 18 ft-lbs, and is Huma regulated. $1300 shipped CONUS PPFF or PO MO from long standing AGN members. Comes with Discovery 3-12x44 SF, cantilever mount, two .177 mags, 2 .25 quick loaders, and 5 .25 mags, and the Doni. $850 shipped CONUS for just the PCP and 2 .177 mags. Bipod not included in the sale.

Selling my .25 Uragun capable of shooting the NSA 34 grains at 980 fps. Its a monster of a pcp and was able to place mid pack out of 13 shooters at my local NR22 match. The Uragun has a huma regulator and turned by the man himself Derek Wall. $1000 shipped CONUS PPFF for just the Uragun and two mags. Will accept PO MO from established AGN members. Doesn't include the Doni can, the Doni bipod adapter, scope, rings, or the bipod.

Sig Sauer MPX Pellet Air Rifle (x2) - $130 Each
- NEW (1), Barely used (1)

Sig Sauer MCX Pellet Air Rifle - $190
- NEW

Located in Los Angeles

A couple of years ago, Ed over on the GTA (maybe here too) published this target.
When you print it out you can make it as large or small as your want.
COVID is with us again so, let’s take a few shots.

Fx dynamic 600 mm shroud and plenum for a 500 mm

Available for sale only (no trades) - FX Dreamline GRS .22

Note: Scope available in another classified ad on this forum. (Falcon X50 FT)

FX Rifle - $1,000 +shipping
Excellent 9/10 or 9.5/10 condition, used lightly. The stock is ridiculously nice. Comes with original box and manuals. Power plenum version and includes heavy hammer in addition to original hammer. I can make 37 FPE with the heavy hammer at 150 PSI regulator setting, JSB 18.1. For reference, 99% of the time I shot at 125 PSI at about 30 FPE. Includes 2 FX magazines.

I have 80 sales with 100% feedback on Ebay under the moniker "kdpeeps86". If there is any hesitation. Also, I have a pending review from a forum member due to me buying a scope from him very recently.

Located in Green Bay, WI, if you are interested in meeting up as well to skip shipping charges.

Up for sale is my GRS green mountain stock. Excellent condition and ready for a new home.

These retail $700 new at HPP. Asking $475 $425 shipped


PayPal gift or add 3%! Serious Buyers ONLY Please! I've been on AGN for years with tons of positive feedback, so should you! Thanks for looking!

Text or PM for additional information or pics!
Text: 312-498-9987

Does anyone have a recommendation as to which compressor is most reliable for filling large tanks,(74 cu ft). As expensive as they are, I do t want to make a mistake in purchasing.

Looking to reduce the number of rifles I own, so up for sale are the following PCP rifles:

1. RTI Prophet Performance 1 in .22 - laser beam with no issues. Shoots JSB 18gr and Hades 16gr very very well. Comes with 2 mags plus original RTI hard case. Asking $950 SOLD
2. RTI Priest 2 in .22 - also a laser beam with no issues. Comes with 2 mags plus original RTI hard case. NLA
3. FX Crown Mk1 in .22 - comes with a black synthetic stock. Excellent condition with no issues. Comes with 2 mags plus original FX hard case. Asking $1100 SOLD Also have a custom camo hydro-dipped FX Crown stock available for $150
4. Benjamin Bulldog in .357 - custom compact Pitbull modified with all the bells and whistles. Has a high power spring capable of 150 fpe. Perfect truck gun based on compact size. Will include all .357 ammo I have to get you started. Comes with 2 mags, single shot-tray plus original Benjamin box. SOLD
5. Huben K1 .22 - this is a 2021 model in excellent condition. Laser beam tuned to shoot 25gr JSB Monsters at 975 fps. Asking $1250 SOLD

All rifles are in excellent condition, only marks are very slight on picatinny rails where scope and bipod were installed.

PayPal gift or add 3%! Serious Buyers ONLY Please! I've been on AGN for years with tons of positive feedback, so should you! Thanks for looking!

Text or PM for additional information or pics!
Text: 312-498-9987

So Tuesday I placed My Order at MidDay. The Guy on the phone said I would receive it today. So Yesterday late afternoon, I had still not gotten a Shipping notice. The Gal wrote back and said I should get a delivery notice this morning, Nope! I got a Notice saying "Your Order has been shipped"! So I checked the Tracking. UPS doesn't even have the package yet. So despite ordering early before the weekend, I may not get it until Tuesday with Monday being a Holiday. It is so Disappointing to see such non-reliable service.
Rant over.

Looking for an airgun that perfectly blends high-quality craftsmanship with pinpoint accuracy? Look no further! I'm selling my Airgun Technologies Manul .22 caliber PCP pistol – and trust me, this beauty is not just a piece of equipment; it's an experience.

**Why You'll Love It:**

- **Top-Notch Build Quality:** Crafted with meticulous attention to detail, the Manul is built to last. Its robust construction and sleek design make it a reliable companion for both seasoned shooters and beginners.
- **Unmatched Accuracy:** Whether you're target shooting or pest control, this pistol delivers tight groups consistently. The precision-engineered barrel ensures every shot hits its mark, making it perfect for those who demand accuracy.
- **Super Fun to Shoot:** The Manul isn't just about performance – it's about enjoyment too. Smooth trigger action, customizable settings, and a satisfying feel make every shooting session a blast.

Whether you're adding to your collection or looking for your first high-quality PCP pistol, the Manul is a choice you won't regret. I'm looking to sell quickly, so don’t miss out on this fantastic deal!

To quiet its bark, and as an added value to the low price, I’m including the attached AGT LDC for free as well (see pictures)…

Payment of $749 $729 $700 will get this pistol to you with prepaid USPS Priority Mail for free (or UPS Ground if you prefer) - for this sale, I’d prefer PayPal only with F&F - I believe my feedback merits not letting PayPal take a 4% cut.

I have aggressively priced this over $100 below the lowest price ($150 below actually) that you can find on the web, in stock, because I have my eye on another project.

Why am I selling? Simply put, I have big hands and sausage style fingers, and this airgun doesn’t seem perfectly fit for my dexterity. YMMV.

Thanks Friends!
Mark

Hey Folks!

My K1 wears an attractive FDE synthetic stock.

Has updated magwell but is otherwise bone stock. I will include the Vortex red dot mounted as an added bonus.

Most reliable shooter I own. Or owned?

Asking price is $1500 $1350 $1200 which includes shipping and insurance on my dime.

I accept Bitcoin, PayPal (friends and family only), CashApp - please check my feedback rating here for confidence in my ability to please. I do not accept Money Orders or Checks - but can also meet in person in 33410 for cash payments.

Thanks,
Mark

Just bought this from Nuvair less then 60 days ago for 430$ it’s still unused and will come with receipt selling due to family emergency 375$ firm. PayPal f & f or Venmo. Located in Bowling Green Kentucky. Will ship at your expense. Please contact Jeremy @3527four03952

I prefer synthetic or CF over wood nd want a change of furniture. I have a great condition Uragan 2 red laminate stock that I would be willing to trade for a synthetic stock or carbon fiber stock. I will cover both ways for shipping on the carbon fiber stock.

Good evening,
I am looking at a compressor to fill my 2 45min scba tanks occasionally. I use a comp to fill my guns but I would like one to fill my tanks probably 4 times a month, just to take tank to matches or when I'm away from my house. I was looking at the Krypton, omega charger. I would think a water cooled would be preferred. I don't want to mess with water buckets so no Yong Heng. 110 only. I welcome any ideas

Thanks
Jon